- 27 Jul 2020
Following lines, detecting colors, responding to light. It is still far from "seeing", but the LEGO Mindstorms EV3 & NXT sensors could be very useful when used properly.
The Sports Utility Vehicle box robot is the new marvelous box robot that we've created. It is designed for teams that would like to learn how to build balanced, stable and working robot chassis following our box principle. It is smaller and easier to build than box robot 1 and it is more simple than box robot 2.
The main advantages of this robot compared to previous box robots are
- motors in the right direction, so when rotating the motor forward, the robot moves forward.
- it is much easier to attach attachments. There are 4 different gears on which you could attach attachments.
- it has a large clearance - which means that it could move over obstacles.
Of course, it has a Gyro and two Color Sensors. Not only that, but we have all the cables shown in the construction.
When not to use this robot?
The SUV Box robot is design to be used with a Gyro sensor and two Color Sensors for alignment. It is not working well for following lines as the sensors are very high and they are very high to allow for high clearance of the chassis. If you need to follow lines we recommend the Dominator X-Y robot
- 01 Aug 2018
Dominator is a compact LEGO Mindstorms EV3 Box robot from the family of the Roller Coaster and Kiddo box robots. Similar to the previous two robots, Dominator also can move its front part up, down, left and right. This robot also has the same length of movement as its two predecessors of this type - 8 LEGO pins on the side and up.
The difference is that Dominator has fewer parts and has a perfect center of weight that allows it to use large attachments and lift heavy objects without threatening its stability. The movement on the X and Y axes has the same gear ratio. The light sensors are attached to the movable part of the robot which enables it to both follow a line and recognize the color of various object with height lower than 7 LEGO units.
- 07 Aug 2020
Втора част на инструкциите за шасито на този състезателен робот от ЛЕГО Mindstorms EV3.
- 02 Sep 2016
Here is an idea. What if a robot does not need attachments. What if there is one special attachment on the front that could do most of the work? Probably an attachment that allows you to move a lever in any direction.
This here is a Box Robot with X - Y axys plane. This robot doesn't need active attachments because it has X - Y table that do the job. Imagine that there is a plane on the front of the robot. With the rack mechanism you can move to any coordinates on this plane.
We have a lot of ideas how to make it even better. We will try to release them in the next few versions.
- 02 Oct 2019
Инструкции за построяването на състезателен робот на принципа на “Box” робота. Този робот е построен с ЛЕГО Mindstorms EV3 и може да се използва на състезания като FLL и WRO.
- 07 Nov 2016
This is a version of the Gazon robot that has a single color sensor and is useful for cases where you still have not purchased a second color sensor, but need to start working on the FLL competition season missions
- 10 Aug 2022
Това е истински състезателен робот с три сензора за светлина и един сензор за ускорение.
- 25 Jul 2017
Building instructions for a Full LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions.
- 03 Nov 2014
The instructions for building the improved EV3 Competition Robot by Mic Lowne
- 09 Aug 2015
Building instructions for a LEGO Mindstorms Base Chassis with a reversible motor
Note: This robot contains wheels that are from the NXT set.
- 14 Feb 2016
Building instructions for a Light LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions
- 23 Nov 2014
This modification of the box robot contains large wheels. It was specially requested by you and we have it .
- 02 Aug 2017
Разновидност на състезателния робот от EV3, при който отпред има сензори за светлина.
- 20 Jan 2016
Направихме този робот по ваше желание. При него има големи NXT колела. Големите ЛЕГО Mindstorms колела правят робота по-бърз, но бъдете внимателни, тъй като той вече не е толкова прецизен.
- 28 Aug 2017
Инструкции за основа за робот от ЛЕГО Mindstorms EV3 с гуми 56mm, вариант 1. Тази основа може да се използва в състезания по роботика като FIRST LEGO League, World Robotics Olympiad и други.
- 24 Jan 2016
При това шаси за робот от ЛЕГО Mindstorms EV3 брик-ът е вертикално разположен. Това е една интересна идея, която може да бъде много полезна.
- 07 Feb 2016
Това е пример за робот за състезанието по Сумо роботика и по-специално за RoboteX challenge. Повечето състезания по сумо за роботи имат изисквания за размера на робота, като за този робот изискването е 15 см х 15 см.
Състезанията по сумо са много забавни и интересни, тъй като целта е да се избута противниковия робот извън ринга.
- 26 Sep 2017
This incredibly compact SPIKE Prime Box Robot is made for competitions like FIRST LEGO League (FLL) and World Robotics Olympiad (WRO). Whakatae (from Maori's word "whakataetae", which means "competitive") is long 17 LEGO units and is with a width of 15 LEGO units. In front of the wheels it has two color sensors which it uses to align. Whakatae also has two Large motors for moving and has two medium motors for attachments!
It's has "V2" in its name, because it's the second version of Whakatae - LEGO Education SPIKE Prime Competition Box robot. The difference between the two is that the first one can be built with only a Large Motor and a Color sensor in addition to the Base set, while this one needs an additional ball bearing. This provides this robot with a lot more stability and can be seen as a true upgrade to the first version.
- 15 Jun 2021