This video tutorial demonstrates the accuracy and consistency of the robot behavior when we use only the blocks for moving the robot without any sensor. Spoiler alert - the robot is not consistent and it is not accurate.
In this video tutorial we run the robot for 10 times and we demonstrate the consistency of the robot behavior with our advanced algorithm for smooth line following. What you will get from it is an understanding and demonstration of what can you expect from the robot.
In this video tutorial we demonstrate the classic algorithm for following a line with robots. It is widely used in FIRST LEGO League competition and could be applied to LEGO Education SPIKE Prime and to other robots also. The algorithm follows a line by moving to the left and to the right and trying to stay at the edge of a black line.
In this video tutorial we focus on accomplishing a part of M08 of FIRST LEGO League 2023-2024 MASTERPIECE season. The mission is to lift and unlock the lever to make room for rolling the camera. It's a simple action but requires the robot to be stable and accurate. We use the Chain Monster - a powerful LEGO Education SPIKE Prime robot.
This videos tutorials demonstrated the robot accuracy in 10 runs one after the other. 5 of them are with the robot moving slow and 5 are with the robot moving fast. See for your self what is the accuracy achieved only with the move blocks of the robot.
This video tutorial focuses on M01, M02, and M14 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. The Chain Monster box robot (a LEGO Education SPIKE Prime robot) uses a single attachment to accomplish all three missions in sequence. First, it pushes the mission model, then presses down the next one, and finally collects some mini-figures.
This tutorial demonstrates how a LEGO Education SPIKE Prime robot could stop when it reaches a wall. FIRST LEGO League competitions are held on tables that have border and it is sometimes useful to use the Ultrasonic sensor to detect the border and stop close to the border. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This is one of the last tutorials in the LEGO Education SPIKE Prime programming for Competitions course and it demonstrates what we've all been waiting for - how to reach a mission model from base in a reliable and consistent way when the mission model is on the other end of the field. Naturally what we use are all the different concepts that we've learned in the course and the tutorial is more advanced than the other so if anything is not clear take a look also at the different tutorials an concepts in the course.
The Load Cargo mission model could be accomplished by loading a cargo in a number of mission models on the FIRST LEGO League 2021-2022 Cargo Connect field. In this video tutorial, we load the cargo on the platooning trucks. In the previous one, we load it on the trains.
In this video tutorial we show how you can build robots that position on the field consistently and reliably by following and line and then aligning to a line. We also demonstrate the concept of "double align" which is quite powerful and even if there were some mistakes they will be handled.
In this video tutorial we demonstrate a really important concept for FIRST LEGO League competitions - you position the robot on the field with depending on timers and rotations. The issue with moving the robot for 10 seconds and then stopping is that every time it is in a different location. Same for rotations. The wheels will slip, the battery will change, something will happen and the robot will not be in the same place every time. This is not consistent and reliable.
In this video tutorial we demonstrate how to accomplish M09 of FIRST LEGO League 2023-2024 MASTERPIECE Challenge. The robot is Chain Monster - a LEGO Education SPIKE Prime robot. It pulls the mission model and precisely positions it in the designated area. An interesting aspect is that the robot must rotate to position the loop correctly, so pay close attention when programming it.
This video tutorials shows how we accomplish a specific mission model from FIRST LEGO League 2022-2023 SUPER POWERED robotics competition. The mission is called - M11 Hydroelectic Dam and in the tutorial we accomplish part of it. In other tutorials when we get back with the SPIKE Kriket box robot we have more time to accomplish the rest of the missions.
In this video tutorial, we demonstrate a full run of all missions without pausing the recording. The competition is the FIRST LEGO League 2023-2024 MASTERPIECE Challenge, and the robot is the Chain Monster - a LEGO Education SPIKE Prime robot.
These kinds of runs are extremely useful for team preparation right before the competition, as they help team members improve their accuracy, speed, and self-control.
In this video tutorial we use the LEGO Education SPIKE Prime Motion Sensor to reach a mission model on the field. It's a basic use of the motion sensor that we will extend in the next few tutorials and in the same time we take the opportunity to demonstrate what a MyBlock is and how to develop one. As a result of this video you will learn how to make the program easier to read and maintain by organizing the blocks in the program in special MyBlocks that couple them all together.
One of the easiest ways to improve the accuracy of LEGO Education SPIKE Prime robots is to use acceleration and deceleration when moving. This also applies to LEGO Mindstorms EV3 and LEGO Mindstorms Robot Inventor and generally to most robots that we know of. This tutorial demonstrates how acceleration and deceleration could be used and what improvement in accuracy and consistency you could expect. This is quite useful for FIRST LEGO League and other robotics competitions.
In this video tutorial we start with the basic of the basic, eg. how to move. We use the block from LEGO Education SPIKE Prime Word Blocks software. It is based on Scratch. The goal of the tutorial is to demonstrate how we can move and to teach something very important - the robot moves inaccurately
In this video tutorial we explore acceleration and deceleration and how to make the robot turn precisely by using acceleration and deceleration. The goal is for us to demonstrate a program that turns the robot to 90 degree. In the first 45 the robot is accelerating and in the second 45 it is decelerating.
In this video tutorial the Chain Monster box robot accomplishes a mission that requires two actions. We should lift up (lever) and push almost at the same time on the mission model for it to release the batteries. These mission model is from the FIRST LEGO League 2022-2023 SUPER POWERED competition.
On the topic of following lines with a robot there is a way to make the robot follow the line a little more precisely. This method is called "Multi-states" program. Or at least we call it like this. In this tutorial you will see how we program 5 state for the robot line following program. This could be particularly important with FIRST LEGO League competitions where we must build consistent and reliable robots.
This LEGO Education SPIKE Prime video tutorial demonstrates the difference in turning slow and turning fast and using the Motion sensor to understand the orientation of the robot. We do 10 consecutive runs. The goal is to understand what can you expect from the robot behavior in terms of consistency.
In this video tutorial, we demonstrate how the Chain Monster box robot delivers minifigures for M14 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime model, equipped with a special attachment for precise delivery.
M14 and M15 are part of larger runs, but in this video, we focus exclusively on these two missions. Let's dive in!
This is a 10 out of 10 video tutorial that demonstrates the consistency and reliability of the robot that accomplishes the Unlock Cargo Plane mission. The attachment is an active attachment with gear wheels. It has a single lever constructed from 2 beans and we use this attachment to push on the mission model.
In this video tutorial the Chain Monster LEGO box robot uses a multi-purpose attachment to collect two elements from the FIRST LEGO League 2022-2023 SUPER POWERED field and these are the "water" units on the field. What's interesting is that the contain where the water units are stored could be closed and opened and this allows us to freely move while non of the water units are lost.
This tutorial demonstrates how we accomplish 5 missions in a row with a single robot and three attachments. This is a true multiple missions run for the FIRST LEGO League 2022-2023 SUPER POWERED. We Drop parts, we pull from the Smart grid, we push a lever, we collect a few energy units and we deliver the dinosaur toy.
Is it better to do fast turns or slow turns? Should you save some time by turning fast or should you be more precise by turning slow. Where is the balance? This video tutorial demonstrates exactly this for LEGO Education SPIKE Prime robot, their motion sensor and an ever occurring question on FIRST LEGO League competition which is how to find the balance and where is the balance.
This is a video tutorial that demonstrates how to accomplish M06 and M07 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster box robot which is a LEGO Education SPIKE Prime robot equipped with an active attachment with gear wheels, which engage the mission model’s gears to rotate the respective parts. The entire run takes less than 3 seconds, delivering a neat and precise performance.