Improving FLL Robot Game. Teacher's Notes. Durable and stable robots
Note for the teacher on making the construction more stable, more durable and using beams for this.
- #465
- 04 Apr 2017
Note for the teacher on making the construction more stable, more durable and using beams for this.
Throwing/Shooting is a common challenge in FIRST LEGO League competitions and in this robotics video tutorial we are demonstrating an attachment that you can use to throw/shoot a ball. There have been missions for throwing balls like in bawling, or like in soccer/football. The attachment that we use relies on the properties of the plastics used for the LEGO MINDSTORMS Robot Inventor 51515 set - it bends and it throws.
This is an animation of a quick pinless attachment that is placed below the robot and is used to deliver parts, like the Container Mission model, to different parts of the field. In the live video in the lesson we explain more about the principles, while here in the animation you can get a quick overview of how it works and you can try to follow the same principles for an exercise.
Following the principles from the previous video, try to make the attachment that you've built, more stable and durable.
This is a 10 out of 10 video tutorial for the Slide mission at the FIRST LEGO League 2020 RePlay LEGO robotics competition. In the tutorial we demonstrate how to accomplish the mission 10 out of 10 times. At FLLCasts we try to build the attachments to be as consistent in their behavior as possible possible. In this way you know how the attachment along with the LEGO Education SPIKE Prime or LEGO Mindstorms robot will behave.
In the previous video, we found the correct answer for our task and it is 18.75, or is it?
In this video tutorial we accomplish a robotics competition mission model and we accomplish it 10 out of 10 times. The mission is Pull-up from the FIRST LEGO League 2020 RePLAY competition. The goal of the mission is to pull up the robot on the bar. The robot must not be touching the ground.
In this video tutorial we accomplish the Innovation project mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to build a new construction on the day of the competition and to complete a mission with this new construction. There are a couple of spare parts in the FLL set and building the construction for the innovation project was quite fun.
This animation demonstrates the use of a Grab Attachment build from LEGO Mindstorms Robot Inventor 51515 set. Many of the FIRST LEGO League missions could be accomplished by grabbing the mission model and the principles shown here is useful for mission models that look like a loop
In this video tutorial we demonstrate the user of a quick 'pinless' attachment. As all pinless attachment it is not that they are completely pinless, but that they do not require the "click" of the pins that is often difficult to achieve in a quick pace environment as during FIRST LEGO League competition rounds.
In this video tutorial we demonstrate a robot attachment that could be used to lift loops and other objects. Almost every year there is a mission at FIRST LEGO League competitions that involve lifting and the principle is interesting. You can build the attachment, robot and mission model from a single LEGO MINDSTORMS Robot Inventor 51515 set and learn a principle of building an attachment for lifting.
In this video tutorial we accomplish the basketball mission from the FIRST LEGO League 2020 reply competition. We use the LEGO Education SPIKE Prime competition robot called Gazon. You will learn the principles of accomplishing a mission of two parts - put the ball in the basket and lift the basket.
10 out of 10 is our favorite series of video tutorials and in this one we are looking at the FIRST LEGO League 2021 RePlay competition and the tire flip mission. The goal of the mission is to flip a tire. Two tire. Perfect. We manage to do it each and every try
In this LEGO robotics video tutorial we will accomplish mission 8 from the FIRST LEGO League 2020 RePlay competition. The name of the mission is Boccia. What you will learn from the video is how to accomplish complex missions that require following a line, aligning to the line and accomplishing many mission models in a single run
This video tutorial is about accomplishing the Pull-Up bar mission from the FIRST LEGO League 2020 RePlay robotics competition. The goal of the mission is to move with the robot and pull the robot up. With this video tutorial you will learn how to build such attachments and how missions that are about lifting the whole robot could be accomplished. The attachment also makes a very good use of rubber bands.
It all started with the famous 2017 mission for flipping a manhole and it was one of our favorite missions ever. Here in this tutorial we demonstrate the same principle of flipping a part from one side to the other. Sounds interesting, yes it is, yes it is.
In this video tutorial we continue the exploration of pinless attachments and how to add them and remove them in a quick fashion. We've done this for SPIKE Prime and for EV3 and we will provide some other references in the lesson in the course. The idea of an attachment below the robot is that sometime, during FIRST LEGO League competitions we have to bring a mission model from one place of the field to other. Basically push it.
In this video tutorial we accomplish the Basketball mission 10 out of 10 times. We use one of the more complex attachments for the FIRST LEGO League 2020 RePlay competition. You will see an learn how to successfully and consistently complete a mission that requires the robot to put a ball into a basket and lift the basket, or lift the basket and put the ball into it.
This LEGO robotics video tutorial is a 10 out of 10 run of the one of the most complex missions at the FIRST LEGO League 2021 RePlay competition. As the mission has three parts we are measuring the success rate of each part of the mission. What you can learn from this tutorial is how to achieve three missions in a single run including line following and a lot of aligning
In this video tutorial we demonstrate how the robot could accomplish the Power Switch mission. Power Switch consists of a cube with a lever and the lever should be rotate to 180 degrees. This mission model was very close to a FIRST LEGO League 2012 competition mission which was called - Oven. The robot, the attachment adn the mission model are built form a single LEGO Mindstorms Robot Inventor 51515 set and with the tutorial you will learn how to use an active attachment with 2 gear wheels to complete such missions.
This robotics video tutorial is about the FIRST LEGO League 2020 RePlay competition and how we accomplish the Slide mission with a LEGO Education SPIKE Prime robot. The goal of the Slide mission is to collect two LEGO Mini figures and bring them back to base. We are demonstrating a simple attachment that collects 2 figures placed in an add way. The whole attachment must bring one of the figures up and then back.
In this video tutorial we demonstrate a Grab attachment build from LEGO Mindstorms Robot Inventor 51515 set. The goal of the grab attachment is to accomplish the mission of bringing loops back to base without loosing or dropping them when returning. The principle of the grab attachment also demonstrates how to have a a locking mechanism. In this way there is not way to the loop to escape.
This short animation demonstrates a really useful principle for FIRST LEGO League competition and this is how to use the Inertia of the robot to trigger an attachment that will do the work for us. It is very useful as we don't have to use the motors of the robot and we can afford to use the motors for other things.
The Cell Phone mission is part of the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to flip the Cell Phone. In this video tutorial we use a LEGO Education SPIKE Prime robot to flip the cell phone. This mission is similar to the FLL 2017: How to accomplish Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018.
With this animation we demonstrate an example for a quick pinless attachment that could be used to collect loops. Loops is one of the most common missions at FIRST LEGO League competitions. We use the LEGO Mindstorms Robot Inventor set to build the attachment, the mission model and the robot. They are all from the same attachment. In the live video in the same lesson we enter into more details about the attachment and we describe its idea
In this LEGO robotics video tutorial we accomplish Weight Machine mission from the FIRST LEGO League 2021 RePlay robotics competition. The goal of the competition is to lift a weight. The mission model resembles a weight machine, and is actually a lever. There are three different levels and you earn different points depending on the level. The attachment for this mission model uses rubber bands and lifts the mission model.
10 out of 10 video tutorial for Rowing Machine mission from the FIRST LEGO League 2021 RePlay robotics competition. In the tutorial you will see how to accomplish the mission almost every time. This is a mission that requires a lot of precision so naturally it is difficult to accomplish it every time, but with the right attachment for the LEGO Education SPIKE Prime robot it is achievable