Content for EV3-G
Program for the EV3 steamship simulator robot Uylam
This program is for Uylam - LEGO Mindstorms EV3 Steamship simulator robot. It is made as a lesson, to automatically find the best position for a ship in stormy weather, relative to the waves. The program has two parallel threads. The first one makes the robot move until the gyro sensor detects less amount of shaking done to the ship. Because of all the shaking, the readings of the gyro are all over the place and thats why we made a My Block, which acts like a filter, so that the readings are more accurate. The second thread starts the storm, which is controlled by a Large motor.
NOTE: The program contains my blocks, that will appear broken if you use any version before 1.3.0 of the EV3 Mindstorms Software!
- #g3y56p
- 28 Jun 2019
Example solution for the tasks in lesson 2 from course 4.0
This program is a basic version of the game played with EV3 Kinesthetic and Memory Game. For the program to work correctly, there must be one touch sensor module attached to port 1 and one lever module attached to port B. The other modules are not required from this program.
- #dh572t
- 01 Oct 2019
Program for the EV3 Aircraft carrier robot Iknathir
This program is for Iknathir - LEGO Mindstorms EV3 aircraft carrier robot. It makes the aircraft carrier robot start spinning the wheels on its motors immediately after starting it. Then, after the lever is pushed, the wheels contract together and shoot the paper plane in the middle. When the lever is pulled afterwards, the wheels get away from the center again.
- #t6kjfx
- 04 Jun 2019
Iqazator war program
You can find the Iqazator instructions here. This program allows the Iqazator to patrol the area, mainly by looking mean. It also allows it to stay hidden for a while and then perform a surprise attack.
- #iarjux
- 17 Jul 2019
Program for the EV3 pedalo robot Gen
This project is for Gen - LEGO Mindstorms EV3 pedalo robot. The program makes the robot follow an imaginary school of fish. It utilizes the gyro sensor to turn the robot accurately, which is a hard task for this robot, because of its strange wheels. Also because of those wheels, the robot usually has a constant steer in one direction, which we correct using the steering block and giving it a steer in the opposite direction!
- #lpsxim
- 28 Jun 2019
Nightbeast FLL Program Run 1
The program that Nightbeast team use for their first Run in FLL Into Orbit Challange. In this run they solve two missions: SpaceTravel and Solar Panel .
- #lzthqr
- 27 May 2019
Smooth Turn Block for LEGO Mindstorms Robots written in EV3-G
The block that constanlty increase the speed while turning. The goal of this is to reduce the acceleration of the robot when it starts turning so that no modules will fall.
There is only one input parameter in this block and this is the Angle on which you want your robot to rotate.
- #q3087g
- 01 Jun 2019
EV3-G MyBlock for moving the Boomer
The block has the following parameters from left to right:
- Degrees – the degrees the front wheels of the car will turn;
- Power – the power of the car;
- Limited/Unlimited – if the value is marked by a tick, the car will move for an unlimited period of time; if the value is marked by an x, the car will move for the specified number of rotations;
- Rotations – the number of rotations the car will make.
Attention! This block is made only for robots with two driving large motors on ports B and C and one steering medium motor on port A!
Detailed explanation of how to use this myBlock is written in the tutorial How to use the CarControl MyBlock.
- #oty0en
- 02 Sep 2019
Nightbeast FLL Program Run 5
The program that Nightbeast team use for their second Run in FLL Into Orbit Challange. In this run they solve Mission 11–Escape Velocity and Mission 13–Observatory.
- #u86d31
- 27 May 2019
FLLCasts Off-season Challenge with LEGO Mindstorms EV3
The FLL season is great, but has one disadvantage - it ends. We have prepared that course for those of you that does not want to stop! The course presents a whole new challenge with custom designed field and mission models, that can be built from just 2 LEGO Mindstorms EV3 sets (core+resource). It is a great way to keep the momentum going after the end of the FLL season and prepare in the best way possible for the next.
- 23
- 34:03
- 54
Accurate Turn Block for LEGO Mindstorms EV3 Robots, written in EV3-G
MyBlock that makes a turn on specific degrees with minimal inaccuracy.
Input parameters:
- TurningAngle - The angle on which you want to turn your robot.
- MotorPower - The power with which your robot will rotate at first time
- CorrectionPower - The power with which your robot will correct it's turning to make it perfect
- #xyvsjw
- 01 Jun 2020
Example solution for the tasks in lesson 1 from course 4.0
This program is the most basic version of the game played with EV3 Kinesthetic and Memory Game. For the program to work correctly, there must be two touch sensor modules attached to port 1 and port 2. The other modules are not required from this program.
- #3jr1tf
- 01 Sep 2019
Program for the EV3 Sailship robot Yolanda
This project is for Yolanda - LEGO Mindstorms EV3 Sailship robot. It contains three programs.
The first one simply moves the robot forward and in the middle changes the sail position.
The second one makes the robot follow the direction of the wind indefinetly, while the robot moves "around an island". The following the direction of the wind is achieved with the gyro sensor and a two-state program.
The third one makes the robot do the same as the second one, but now the following the direction of the wind is done with a 3-state program, which means that it has a state, in which the sails arent moving.
- #i9jdwn
- 04 Jun 2019
Nightbeast FLL Program Run 2
The program that Nightbeast team use for their second Run in FLL Into Orbit Challange. In this run they Inserts the Tube Module into the Habitation Hub port on the west side, move all four Core Samples so they are no longer touching the axle that held them in the Core Site Model and place the Gas Core Sample completely in Base.
- #9qkh3e
- 27 May 2019
Nightbeast FLL Program Run 3
The program that Nightbeast team use for their second Run in FLL Into Orbit Challange. In this run they еject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer, make the Crater Crossing mission and scores a meteoroid (shoot a ball).
- #r49ncv
- 27 May 2019
Nightbeast FLL Program Run 4
The program that Nightbeast team use for their second Run in FLL Into Orbit Challange. In this run they tries to make missions M10–Food Production, M12–Satellite Orbits and Move the Cone Module to base. But this program should be upgraded.
- #en09y3
- 27 May 2019
Program for the EV3 yacht robot Robotics Supreme
This project is for Robotics Supreme - LEGO Mindstorms EV3 yacht robot. It contains three programs.
The first one follows a line using one color sensor and detects if the robot has been pushed. Then it plays an alarm and stops the program.
The second program makes the robot go in a square, using the gyro sensor wait-change block. This makes it one of the easiest square solutions there is.
The third program makes the robot follow a direction. That is accomplished similarly to the linefollowing, but instead it uses the gyro sensor and always follows a straight line.
- #ut15gk
- 29 Jun 2019