Building Instructions

Building instructions for a LEGO Mindstorms EV3 Robot that we call the Five Minute Bot because it could be built in Five Minutes.

Note: If the robot is making inconsistent turns due to the floor, modify the castor wheel so it is placed further back in the construction. Thus the center of mass falls more over the tires and the turns are more consistent.

This is the second version of the EV3 Easy Bot. The robot is used in classes with students as one of the first robots to be built. Easy to follow and to arrive at a construction even for first-time students.

"How do you build a forklift using only gear wheels and levers without a rake"... Ok, we would admit that is a difficult question. It even sounds difficult. So let's start with something easy. A LEGO Mindstorms EV3 robot. It lifts objects in the air. It uses two gear wheels that work together and then move in different directions and are placed perpendicular to each other... This sentence kind of got difficult again... Let me try again.

Follow the building instructions with these 70+ steps and you will have a very nice robot and you will learn a simple trick of how to use gears and change the directions in which they rotate. 

Building instructions for the EasyBot LEGO Mindstorms robot using in many of our courses and tutorials. This EasyBot has two motors and two front wheels. The third wheel is...well, check it out, see how the third wheel is built. 

Building instructions for a LEGO Mindstorms EV3 robot that we call Space Explorer. The motors are attached in a very interesting way to the brick. Both the brick and the motors are vertical and there are not many robots like this. With its ultrasonic sensor, this robot allows you to follow, find or avoid objects. Just like an explorer. And since it is a robot why not put it in space and call it "Space Explorer".

There is one part that is not from the EV3 sets, but you can actually skip it. You don't need it. Try to find which one.

The goal of these building instructions is to build a simple LEGO Mindstorms EV3 robot without wheels. You should then think of yourself how exactly to add the wheel. Which wheels would you use on the front? How are you going to build the third wheel? Here are for example a few recommendations on building the third wheel - 1, 2, 3, 4 

Later on you can expland this construction with a grabber as demosntrated here. 

This LEGO Mindstorms robot is strange. Can you guess what is strange about it?... The motors are placed in a reverse direction. One of the motors is facing "forward" while the other one is facing "backwards". This means that if you make the robot move forward with a Tank Block in the EV3-G software it will just rotate. To make the robot move forward, you will have to make one of the motors rotate forward and the other one - rotate backwards.

The goal of this robot is to teach students that motors could be placed in many different ways. It is not always the case that the two motors face the same direction. Also, it is quite fun. 

It sparks. It's sparkling. Well, the goal of this LEGO Mindstorms building instruction is to spark the imagination when the base of the construction is very simple. Just two motors with the brick above them and one of the most classic ways to attach them together - with angled beams. 

The construction could use EV3 or NXT wheels, so chose wisely. As a robot chassis base, it is suitable for all kinds of extensions. An interesting thing is the motors are attached to each other with a frame which is getting very popular in the EV3 world.  

Following the Spy Bot, we have this new Spy Vehicle. Yes, yes it is using an ultrasonic sensor.

The building instructions are for a robot base that looks like a car but is not exactly a car and has a strange shape. Just like spy vehicles - a car, but not only a car and not just a car. 

There is a lot of physics and math involved when learning with LEGO Mindstorms EV3 robots. It is generally "difficult" to include them directly during classes because students are coming for "something funnier" and at the same time, they could be of different ages. But Inertia is a pretty common topic that is quite easy to introduce to students, especially with a robot. 
The robot moves and stops. What will happen with the cargo when the robot stops? Naturally, the cargo will continue moving and this is dangerous. For how long, what would be the energy? All these are things that could be discussed with this robot.
The robot is not completely finished because you have to finish it and decide on the wheels to be used. 

This robot is part of the category of robots called animals. After following the building instructions you would have a frog that could jump. Of course, the jump depends on the surface and the friction between the robot and the ground... quite complex physics involved. But if you program it to move forward it will try to jump and it is your job to try to make it jump higher. 

You could try to extend some of the legs, for example.

Building instructions for a LEGO Mindstorms Robot that cleans the landing site when landing on a different planet. Built from an EV3 set it is a perfect simple tank robot with continuous tracks for lifting and moving things. Basically cleaning.   

The goal of these building instructions is to build a LEGO Mindstorms EV3 robot without wheels. You should then decide on your own how exactly to add the wheel. Which wheels would you use at the front? How are you going to build the third wheel? Here are some recommendations on building the third wheel - 1,2,3,4 

Building a third wheel for a LEGO Mindstorms EV3 Robot is always an interesting and challenging task. These building instructions are for a third back wheel. You can even notice that there is no wheel involved. It is just LEGO parts but it is one of the most stable ways to build a third wheel. There is some friction, of course, but not that much.

Building instructions for a steering car. The front wheels steer through a Medium LEGO EV3 motor while the rear wheels are both driven by a single Large LEGO EV3 motor.

Third version and a third way to build a third wheel for a LEGO Mindstorms EV3. The instructions are easy to follow and in the end you will be able to attach this wheel to your robot by yourselves.

Another building instruction for a third wheel suitable for a LEGO Mindstroms robot. This one is classical. Just a few parts but could be used on a lot of different robots. There is some friction when turning so this one is more suitable if you have to do more straight movements.

This here is a base for a robot that has the brick Upside Down. Have you seen Stranger Things? We would admit that this robot does not look exactly like a 'Demogorgon', but this here is the challenge. Can you use this base and make the robot look like a Demogorgon. Add a picture to the comments section below the material.

Do you have other ideas for Demogorgon? Build them with LEGO and add a picture below this material or send it to [email protected]. We would feature it at FLLCasts.com.

Let's build a robot with treads. These building instructions are for a Guard Tank Robot. The good thing about tanks is that they could tackle a lot of obstacles on their way. At least this is what people are saying. Try it. Could you move over LEGO parts with this tank if they are one brick tall, or two bricks tall? What would be the largest obstacle that you could find, over which this tank could still move? Share a video or picture below in the comments section.

We would admit that this tank lacks a gun or an arm, but it is up to you to build one.

Classical third wheel for LEGO Mindstorms robots. This construction comes from the NXT world and the wheel is available in the NXT set.