This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. It is an experiment we did that didn't work out for the FLL 2023-2024 MASTERPIECE field, but is interesting nonetheless. It shows how you can take an out-of-box robot and put a steering mechanism on it.
This is an attachment for Kufar - Easy SPIKE Prime out-of-box robot. The attachment solves the light show mission using rubber bands! It works well, but it does depend on how new your model is. On newer models it can work with only 2 red rubber bands or even with 2 yellow and 2 red. Find the best combination for your field.
The trigger for the light show mechanism also releases Anna the Museum Curator and the masterpiece on the pedestal.
Following the Spy Bot, we have this new Spy Vehicle. Yes, yes it is using an ultrasonic sensor.
The building instructions are for a robot base that looks like a car but is not exactly a car and has a strange shape. Just like spy vehicles - a car, but not only a car and not just a car.
It sparks. It's sparkling. Well, the goal of this LEGO Mindstorms building instruction is to spark the imagination when the base of the construction is very simple. Just two motors with the brick above them and one of the most classic ways to attach them together - with angled beams.
The construction could use EV3 or NXT wheels, so chose wisely. As a robot chassis base, it is suitable for all kinds of extensions. An interesting thing is the motors are attached to each other with a frame which is getting very popular in the EV3 world.
Instructions for a simple Crane construction built from LEGO Mindstorms EV3 set. In order to operate properly, you need to add weight at the back of the jib. The most interesting part of the robot is the design of its hand, so examine it closely.
We designed this field to closely resemble the hardest level of line-following fields used by the "Arab Robotics & AI Association" in multiple competitions.
Building instructions for the Easy Bot built with LEGO Mindstorms EV3 parts. This LEGO robot is suitable for classes with students in robotics and is one of the first robots that we build. It takes about 10-20 minutes to be constructed by first-time participants.
We designed this field to closely resemble the hard level of line-following fields used by the "Arab Robotics & AI Association" in multiple competitions.
We designed this field to closely resemble the easiest level of line-following fields used by the "Arab Robotics & AI Association" in multiple competitions.
We designed this field to closely resemble the intermediate level of line-following fields used by the "Arab Robotics & AI Association" in multiple competitions.
In this attachment two knob wheels "(32072 ) Technic Gear 4 Knob" engage at 90 degrees angle. One of the knob wheels is a part of the robot and the other is a part of a pinless active attachment. The purpose of this attachment is to demonstrate How NOT to build attachments.
Build the attachment and experiment. See for yourself how it "jumps" up and down when the knob wheels are rotating and you hold the lever by hand.
This is an example of a robot for Sumo Robotics competitions. Specifically for RoboteX challenge. As most of the Sumo competitions have specific requirements for the robot size this one follows the 15cm x 15cm requirements.
Sumo competitions could be quite fun and interesting as the goal is to push the other robot outside of the ring.
Building instructions for a LEGO Mindstorms EV3 Robot Base with 56mm Tires, Version1. The robot base could be used in robotics competitions as FIRST LEGO League, World Robotics Olympiad and others
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
This is a simple pinless active attachment for the SUV Box Robot.
In this attachment we use "(32498) Technic Gear 36 Tooth Double Bevel". There are four pins added to the wheel and it it this pins that engage with the "(32072 ) Technic Gear 4 Knob". The more important thing is that the knob wheel and the gear wheel are parallel to each other.
While the motor rotates the attachment has 4 points of contact (instead of one or two when two Knob Wheels are in contact) with the robot knob wheel. There are no forces that drive the attachment to jump and lose engagement with the robot.
Do you remember the Chain Monster Box Robot? This one is the same but without the chains. What is cool about this robot is you can use almost all Chain Monster attachments and build a lot more.
The Unchained Monster box robot requires additional parts on top of the LEGO Education SPIKE Prime and LEGO Education SPIKE Essentials. Check out the additional parts required.
Luly is a new STEAM competition robot from LEGO Education SPIKE Prime. We would use in some of the courses. This version of Luly have some light shields to protect the color sensor from ambient light. Check out the courses below and see how Luly is used to complete in a competition.
This attachment is accomplishing three missions from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solve mission 11 - Light show. It partially solves mission 14 - Audience delivery.
This robot was built by your request. It includes NXT large wheels. The Large LEGOO Mindstorms wheels will give you a faster robot, but be careful, because it will not be that accurate.
