Building Instructions -

• Mission Models

These are instructions on how to build the:

• Steel Structure

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Background

Incredible engineering accomplishments like space travel come about in steps. And many huge, progressive sub-goals need to be met before we can forever leave earth and live to tell about it!

Mission

The robot needs to send payload rockets (carts) rolling down the space travel ramp. The first cart is preset and ready to go, but the robot needs to load the other two from the base.

Scores

• Vehicle payload rolled down the space travel ramp: 22
• Supply payload rolled down the space travel ramp: 14
• Crew payload rolled down the space travel ramp: 10
• Possible scores: 0, 10, 14, 22, 24, 32, 36, 46

Scoring Requirements

• For each roll, the cart must be independent by the time it reaches the first track connection ramp. > Note: Only allowed method. Must be observed by the referee.
• Start each payload clearly rolling down the space travel ramp. > Note: Only allowed method. Must be observed by the referee.
• As a mission requirement in any mission, the word “independent” means “not in contact with any of your equipment. > As long as the cart clearly rolls independently past the first track connection, it’s okay if it doesn’t roll all the way east.

(mission descriptions source https://www.first-lego-league.org/)

Background

Space stations allow us to learn about and even practice living in space, but improved technology and new international partners require modules to be easily interchangeable.

Mission

The robot needs to remove and insert modules among the habitation hub’s portholes.

Scores

• Move the cone module completely into the base: 16
• Insert the tube module into the habitation hub port, west side: 16
• Transfer/insert the docking module into the habitation hub port, east side: 14
• Possible scores: 0, 16, 32, 46

Scoring Requirements

• Results must be visible at the end of the match.
• Inserted modules must not be touching anything except the habitation hub. > Needs to be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

These are instructions on how to build the:

• Bridge Road

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Background

Though spacecraft travel crazy-fast, even the shortest trips involve a lot of time for the traveller’s body away from labour and recreation, which is bad for the heart and lungs.

Mission

The robot needs to repeatedly move one or both of the exercise machine’s handle assemblies to make the pointer advance.

Scores

• Get the pointer tip completely in orange, or partly covering either of orange’s end-borders: 22 OR
• Get the pointer tip completely in white: 20 OR
• Get the pointer tip completely in grey, or partly covering either of grey’s end-borders: 18
• Possible scores: 0, 18, 20, 22

Scoring Requirements

• Advance the exercise machine’s pointer along its dial by moving one or both of the handle assemblies. > Only allowed method. Must be observed by the referee.
• Results must be visible at the end of the match.

Background

A space telescope is astonishing, but it can’t beat the accessibility and simplicity of a college or science museum observatory – that is, if you know how and where to point it.

Mission

Rotate the observatory to a precise direction.

Scores

• Get the pointer tip completely in orange, or partly covering either of orange’s end-borders: 20 OR
• Get the pointer tip completely in white: 18 OR
• Get the pointer tip completely in grey, or partly covering either of grey’s end-borders: 16
• Possible Scores: 0, 16, 18, 20

Scoring Requirements

• The result must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

Background

Solar panels in space are a great source of energy for a space station in the inner solar system, but since things in space are always moving, aiming the panels takes some thought.

Mission

Solar panels need to be angled toward or away from you, depending on strategy and conditions.

Scores

• Both solar panels are angled toward the same field: 22 (for both teams)

• Your solar panel is angled toward the other team’s field: 18

• Possible scores: 0, 18, 22, 40 as shown below and seen from above your north border, facing north.

“Your” solar panel is the one on your west end of the table.

Scoring Requirements

• Results must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

These are instructions on how to build the:

• Crane

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Background

For rovers in other worlds, getting stuck is definitely not okay! Teams of rovers can help each other, but a lone rover needs to be very careful.

Mission

The robot or whatever agent-craft it sends out needs to cross the craters model completely, by driving directly over it. Not near it. Not around it.

Scores

• Robot or agent-craft crossed the craters model completely: 20
• Possible scores: 0, 20

Scoring Requirements

• All weight-bearing features of the crossing equipment must cross completely between the towers. > Only allowed method. Must be observed by the referee.
• The crossing must be from east to west, and make it completely past the flattened gate. > Only allowed method. Must be observed by the referee.

(mission descriptions source: https://www.first-lego-league.org/)

These are instructions on how to build the:

• Swing
• Traffic jam

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Background

Space is quiet and beautiful, but with almost no heat, air, nor air pressure, it could freeze, suffocate, and boil you all at once! Help our spacewalking astronaut “Gerhard” get to safety.

Mission

The robot needs to get Gerhard’s body into the airlock chamber.

Scores

• Astronaut completely in the habitation hub’s airlock chamber: 22 OR
• Astronaut partly in the habitation hub’s airlock chamber: 18
• Possible scores: 0, 18, 22

Scoring Requirements

• For this mission, the word “body” includes all parts except the loop.
• Results must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

Background

To live away from earth, it would help if we were good at detecting and mining resources under the surfaces of other planets, moons, asteroids, and even comets.

Mission

The robot needs to get all the core samples out of the core site model, then it has options for what to do with them as described here, and in mission M03.

Scores

• Move all four core samples so they are no longer touching the axle that held them in the core site model: 16
• Place the gas core sample so it is touching the mat, and completely in the lander’s target circle: 12 OR
• Place the gas core sample completely in base: 10
• Place the water core sample so it is supported only by the food growth chamber: 8
• Possible Scores: 0, 16, 24, 26, 28, 34, 36

Scoring Requirements

• Results must be visible at the end of the match.

(mission descriptions source: https://www.first-lego-league.org/)

Background

It is amazingly expensive to send heavy stuff like construction material into space, so scientists and engineers are instead learning how to print what they need in space, using available extraterrestrial elements.

Mission

The robot needs to get a regolith core sample and place it into the 3D printer, which will cause the 2 × 4 brick to pop out. The ejected 2 × 4 brick can then be delivered elsewhere for more points.

Scores

• The 2 × 4 brick ejected and completely in the northeast planet area: 22 OR
• The 2 × 4 brick ejected and not completely in the northeast planet area: 18
• Possible scores: 0, 18, 22

Scoring Requirements

• Results must be visible at the end of the match.
• Eject the 2 × 4 brick by placing a regolith core sample into the 3D printer. > Only allowed method. Must be obserserved by the referee.

(mission descriptions source: https://www.first-lego-league.org/)

These are instructions on how to build the:

• Bat
• Inspection drone
• Support axles
• Coach Pins
• Precision tokens
• Dridge Entrace
• Bridge Top

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Background

Our Lander doesn’t have working parachutes, thrusters, or cushions, but one important feature is realistic … it’s very fragile.

Mission

Get the lander to one of its targets intact, or at least get it to base.

Scores

• Move the lander to be intact, touching the mat, and completely in its target circle: 22 OR
• Move the lander to be intact, touching the mat, and completely in the northeast planet area: 20 OR
• Move both parts of the lander completely into the base: 16
• Possible scores: 0, 16, 20, 22

Scoring Requirements

• The result must be visible at the end of the match.
• The lander is “intact” if its parts are connected by at least two of its four tan location axles.

(mission descriptions source https://www.first-lego-league.org/)

These are instructions on how to build the:

• Elevator
• Test building

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Background

If a satellite doesn’t have the correct velocity and distance from earth, it can fall, drift away, fail to function or get destroyed by debris. Propulsive adjustments need to be performed with precision.

Mission

The robot needs to move one or more satellites to the outer orbit.

Scores

• Move any part of a satellite on or above the area between the two lines of the outer orbit: 8 each
• Possible scores: 0, 8, 16, 24

Scoring Requirements

• Result must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

These are 3D Building instructions for the Oil Platform. You can build them from Bag 2

Background

Gardening is easy, right? You just need a truckload of rich soil, some rain, sun, fertilizer, helpful bugs, CO₂ and a rake but what if you were orbiting Neptune, in a room the size of a minivan?

Mission

Move the push bar the right distance at the right speed, to get into the green scoring range.

Scores

• Spin the food growth chamber’s colours so the grey weight is DROPPED after green, but before tan, by moving the push bar: 16
• Possible scores: 0, 16

Scoring Requirements

• The result must be visible at the end of the match.
• Spin the food growth chamber’s colors must be spun by moving the push bar. > Only allowed method. Must be oberserved by the referee.

(mission descriptions source: https://www.first-lego-league.org/)

These are instructions on how to build the:

• Bridge Ramp

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.