Building Instructions -

• Container

Building instructions for the LEGO Mindstorms EV3 robot used for accomplishing WRO 2014 mission. It is the full robot with the lift at the top

This is one of the robots used in World Robotics Olympiad. It uses chains to move ping pong balls out of a container.

Robot for collecting ping pong balls used in the World Robotics Olympiad competitions. It is constructed with LEGO Mindstorms EV3

Robot building instructions for a World robotics Olympiad with a large container used for collecting ping-pong balls

This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition. 

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Boccia mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.. With this attachment we follow the line with the robot until we reach the team mission and we use the lever on the top to push the blue box. Then we follow the line to reach the Boccia mission, and three things happen: 1. align to the mission model with the front of the attachment, 2. turn the lever to release the green boxes and 3. move the lever to push on the mission model. This is a complex mission requiring a lot of coordination from the robot. Quite interesting I must say.

LEGO Mindstorms Robot Base for a high placed attachment for containing ping pong balls. It is interesting how the balance is achieved with such an attachment. It was only one of the version in a series of LEGO Mindstorms Robots for World Robotics Olympiad.

Zatter is the big brother of Zat and Zatty. Zatter is here to take the load. It has a large container on its back, suitable for placing different toys inside and playing with them. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 it was designed by my wife and just slightly improved by me and my colleagues. We spend a good hour or two with the kids placing different plush toys and playing with it.

Play time for a week: About an hour

This is a complex three parts attachment for the FIRST LEGO League 2020 Replay competition mission called Boccia. The attachment does three things in the same time. It can align to a mission model, It has a contained for boxes that should be dropped and it also has a lever to rotate the boccia target mission model. On top of the that the attachment is working 10 out of 10