Video tutorials -

• FIRST LEGO League

-

• Gears

-

• Push

This video tutorial focuses on accomplishing M8 Artificial Habitat of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a simple active pinless attachment mounted at the front of the robot for precise engagement with the mission model.

The goal is a perfect 10 out of 10 runs by positioning all four crabs upright with their yellow bases touching the mat. You can find the full explaining tutorial here.

This video tutorial focuses on accomplishing M8 Artificial Habitat of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a simple active pinless attachment mounted at the front of the robot, designed for precise engagement with the mission model.

The goal is to position all four crabs upright with their yellow bases touching the mat for maximum points, a task requiring careful alignment and controlled movements. While it is possible to complete the mission with fewer crabs upright, this run is programmed for the full score, using dedicated movement commands in a separate run for maximum accuracy. This approach combines a reliable mechanical design with precise navigation to meet the mission’s demanding scoring conditions.

The after season review continues. No. We are not publishing a single solution for the next season before it is over, but let's learn from the previous season. The current tutorial is about three missions at once on a single run with the robot. Most FIRST LEGO League teams try to accomplish one-two missions on a single run out of the base, and three is really what makes the difference

In this video tutorial, we demonstrate a full run of all missions without pausing the recording. The competition is the FIRST LEGO League 2023-2024 MASTERPIECE Challenge, and the robot is the Chain Monster - a LEGO Education SPIKE Prime robot.

These kinds of runs are extremely useful for team preparation right before the competition, as they help team members improve their accuracy, speed, and self-control.

This is a 10 out of 10 tutorial in which the MiniBox robot accomplishes the M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. The MiniBox is a LEGO Education SPIKE Prime box robot that uses detachable attachments.

In this run, the robot performs five actions: it collects the M15 minifigure and throws it backward, rotates the chicken for M12, and then pushes and pulls the M13 Craft Creator mission model. All of these actions are completed in under 15 seconds!

This is a 10 out of 10 tutorial demonstrating the consistency with which the Kufar robot accomplishes M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. Kufar is an out-of-the-box LEGO Education SPIKE Prime robot, meaning you don’t need to connect attachments—just slide the brick into the attachment frames.

In this run, the robot collects the mini-figures using a rubber band mechanism, rotates the chicken with a gear mechanism, and pushes and pulls the M13 Craft Creator mission model.

This is a video tutorial on accomplishing M12 and M13 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. We've decided to combine the two missions and approach M12 in a slightly different way - by activating a gear wheel and thus rotate the chicken. The mission is accomplished in almost no time and the result is flawless. The robot is Chain Monster, a powerful LEGO Education SPIKE Prime robot.

This is a video tutorial that demonstrates how to accomplish M06 and M07 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster box robot which is a LEGO Education SPIKE Prime robot equipped with an active attachment with gear wheels, which engage the mission model’s gears to rotate the respective parts. The entire run takes less than 3 seconds, delivering a neat and precise performance.

In this video tutorial, the Chain Monster box robot accomplishes three missions in a single run from the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. The LEGO Education SPIKE Prime robot uses an active attachment to collect the mini figures, to push a lever, and to deliver the figures to their designated places. The robot starts from the red base and returns to the blue base, performing all these actions in less than 20 seconds - consistently and reliably.

In this video tutorial, we are accomplishing three missions in a single run from the FIRST LEGO League MASTERPIECE season. We are using our new out-of-box LEGO Education SPIKE Prime robot, called Kufar. Have you used such robots? No? Well, let's dive deeper in the construction of out-of-box robots and see how convenient and user-friendly they can be. Take one brick with a couple of sensors and let your imagination run wild as you create the most inventive attachments.

This 10 out of 10 tutorial is a complete uncut recording and it shows how the Chain Monster box robot accomplishes 5 missions in a single run and it does this 10 out of 10 times. It is from the FIRST LEGO League 2022-2023 robotics competition.

In this video tutorial we accomplish 5 missions in a single run with the Chain Monster box robot. It accomplishes 5 missions from the FIRST LEGO League 2022-2023 robotics competition.

This is a 10 out of 10 tutorial for a 3 missions run. The robot goes out of base and accomplishes 3 missions in a single run. It demonstrates the consistency and reliability of the robot and its program that uses sensors.

In this video tutorial we accomplish 3 missions from the FIRST LEGO League 2022-2023 SUPER POWER robotics competition. The three missions are wind turbine, television, rechargeable battery. The robot uses a program with sensor compared to the previous way we've accomplished the missions with the same robot.

This is a 10 out of 10 video tutorial demonstrating the consistency and reliability of the Kriket robot when accomplishing the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery.

In this video tutorial we accomplish the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery. We demonstrate how 3 missions could be accomplished in the single run and in the same time with a single attachment.

This is the 10 out of 10 version of executing 3 missions in a single run. It worked like a charm! 10 times. We push and collect energy units for the FIRST LEGO League 2022-2023 SUPERPOWERED Challenge competition.

In this video tutorial, we accomplish three missions in a row. It is a little longer and more detailed tutorial, but hey, 3 missions, one after the other. These are the Wind Turbine, where we have to push 3-4 times and collect the energy units, the Watch Television, where we reach the mission model and slightly push, and, of course, the Rechargeable Battery - where we collect the energy units.

The M08. AEROBIC EXERCISE is one of the very common types of mission in FIRST LEGO League robotics competitions. I think this pattern of missions was first introduced with the growing abilities of the participating students that were constantly reaching the maximum number of points. So the competition introduced mission that require a lot of time - 20-30 seconds, are time consuming and are complex. They requires a lot of moves. This here is a video tutorial on how it could be accomplished

This is a recording of a completely perfect, 10 out of 10 accomplishment of a two-part mission - Train tracks, from the FIRST LEGO League 2021-2022 Cargo Connect competition. Due to the proper use of motion and color/light sensors, the robot is 100% consistent and reliable for a non-trivial mission. Even when the robot makes a mistake, it auto-corrects and compensates for this mistake.

This FRIST LEGO League video tutorial is about he Boccia Share mission from FIRST LEGO League 2020 RePlay competition. In the tutorial we demonstrate how to push on a lever to release a mission model part - in this case a box. You have the choice before the competition to cooperate with the other team and to decide if you are going to do the blue or the red box.

This tutorial explains the use of motion and light/color sensors to accomplish a complex mission split into three parts. It gets into detail about how we keep a straight line with the motion sensor, follow a line with the color sensors, and transition between different parts of the program by aligning and detecting lines with the sensor. The goal is to get to a reliable and consistent behavior of the robot. On top of that, it is configurable, as we've left a few parameters that could be set to configure the behavior for a specific robot, venue, lighting, battery level, and wheels friction.

In this video tutorial we look at an active attachment that uses gear wheel and the attachment is general enough to be suitable for reuse. This means that a lot of different missions could be accomplished with the same attachment. The goal of the attachment is to transfer power to a lever through a system of axles and gear wheels. It is interesting that we change the orientation of the gear wheels.

In this video tutorial, we push two of the mission models with a pinless active attachment with gears. The goal is to push the mission models after the blue lines. This attachment is interesting as it demonstrates a non-straightforward idea of how we can push the mission models. We explain the Scratch program and how we use the motion sensors - you will learn how to turn to a specific angle by using the motion sensor.