Building Instructions

These are instructions on how to build the:

• Bench

You can find more building instructions and tips and tricks about the competition on this page.

This is the attachment to accomplish Fll 2019 M07 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.

These are instructions on how to build the:

• Red Building Units

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

FIRST^® LEGO^® League mission requirements need to be achieved by your robot through its programs and its use of equipment. You’re allowed to hand-rescue your robot, but that does cause this penalty. Be sure to pay extra attention to the rules where they talk about “Interruptions"

Penalty

• If you interrupt the robot: minus 3 each time
• Possible penalty totals: −18, −15, −12, −9, −6, −3, 0

Scoring Requirements

• Interruption needs to be observed by the referee.
• Upon penalty, the referee will place one penalty disc in the southeast triangle as a permanent interruption marker.
• You can get up to six such penalties.
• If a penalty disc comes off the triangle, it is simply returned, with no effect on score.

(mission descriptions source https://www.first-lego-league.org/)

This attachment demonstrates the principle of dropping a part inside a container. It uses parts only from the LEGO MINDSTORMS Robot Inventor 51515 set. The goal of the attachment is to release a lever that is holding the wheel.

This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.

We use this attachment to discuss how an attachment and a module from LEGO Mindstorms Robot Inventor could be build in an easy to detach fashion. Check out the tutorial in the lesson for this attachment for more information about Detachable Modules

This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.

Drop mission model developed with a LEGO Education SPIKE Prime. The mission is to move and drop and object in the mission model. This triggers the mission model. It is a popular mission at FLL competitions. In 3D building instructions for you to construct.

These are instructions on how to build the:

• Rowing Machine

You can find more building instructions and tips and tricks about the competition on this page.

- you should attach it to the motor, depending on the orientation of the motor.

Forth version of a reusable gear attachment. Again, it powers two axles and this time there is a lever connected to one of the axles.

This flip attachment from LEGO MINDSTORMS Robot Inventor 51515 set is design to flip parts. It can flip a manhole for example, but could also flip other parts. The principle of flipping is quite interesting as it uses two axles and a border.

This is an attachment positioned below the robot and used for when we need to push something with the robot. It keeps the cargo in place while pushing. In this way we can achieve a consistent behavior with the robot, which is what we all want

These are instructions on how to build the:

• Cargo plane from innovation project bricks

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Game Cubes
• Health Units
• Cell phone
• Coach Pins
• Precision Tokens

You can find more building instructions and tips and tricks about the competition on this page.

These are instructions on how to build the:

• Pull-up Bar

You can find more building instructions and tips and tricks about the competition on this page.