Truck Robot Attachment for FLL Nature's Fury
Building instructions for a LEGO Mindstorms EV3 Truck Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition
- #91
- 15 Nov 2015
- 1
Building Instructions -
Filters:
Building instructions for the first slide for the robotics insert
- note that I have added two angled beams and an axle to illustrate how you could use the slide as an active attachmen;
- #152
- 17 May 2015
- 1
BigDaddy Front Frame - frame for the front wheels
You can attach a frame around the front wheels to make them more stable and to allow for better aligning. The module extends the front wheel built at BigDaddy Front - front wheels mechanism module for a large LEGO Mindstorms Competition Robot
- #110
- 22 Feb 2015
FLL 2019: Attachment To Accomplish The City Shaper Elevator (08) Robot Game Mission
This is the attachment to accomplish Fll 2019 M08 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
- #1055
- 07 Aug 2020
Глава на риба от ЛЕГО Майндстормс EV3
Това е модул, който прилича на глава на риба. Той използва сензор за допир като уста и иначе е изцяло за красота. Модулът се използва в Писцис - LEGO Mindstorms EV3 робот Риба.
- #974
- 24 Jan 2020
FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot
This is an attachment for extracting the raw materials. This attachment is made for Kamak box robot.
The program for this attachment is FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot - Demo Program
- #868
- 15 Jan 2020
Barrier mission model.FLLCasts Off-season Challenge 2019
Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.
- #775
- 22 May 2019
Transportation stands mission models. FLLCasts Off-season Challenge 2019
Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.
- #781
- 22 May 2019
Ugbroid - Модулна кола от ЛЕГО EV3 - Част 4, версия 1
Инструкции за четвъртия модул, версия 1, на робота Ugbroid - задни колела.
- #427
- 01 Mar 2017
Flywheels constructions for experimenting for physics moment and energy
User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.
The construction is built with LEGO Mindstorms EV3
- #225
- 24 Oct 2015
- 1
BigDaddy Second Motors Position - second way to position the LEGO Mindstorms motors
Building instructions for this part of the BigDaddy competition robot
- #190
- 22 Mar 2015
- 1
Rotation frame constructed from EV3 set
The rotation frame requiers an NXT large double gear wheel that is not available at the EV3 set. You can use the instructions below to construct a similar mechanism from Mindstorms EV3 set
- #137
- 04 Jan 2015
- 2
Bag 7 - Treadmill - FIRST LEGO League 2020-2021 RePLAY
These are instructions on how to build the:
- Treadmill
You can find more building instructions and tips and tricks about the competition on this page.
- #1130
- 31 Aug 2020
Глава на Овен от ЛЕГО Майндстормс EV3
Този модул е направен да изглежда като глава на овен направена с ЛЕГО Майндстормс EV3. Тя използва ултразвуков сензор, който е насочен надолу, все едно овена атакува, като очи. Може да се комбинира с други модули за да се направи перфектният робот-овен!
- #970
- 24 Jan 2020
Платна на кораб от ЛЕГО Майндстормс EV3
Този модул е направен да изглежда и да се движи като платна на истински кораб! Модулът се състои от две мачти, които са свързани за да се движат заедно. Задната мачта е свързана към среден мотор, който може да движи всички платна и също е свързан към жироскопичен сензор, който засича дали целият кораб се е завъртял. Този модул се използва в Йоланда - LEGO Mindstorms EV3 робот кораб.
- #973
- 24 Jan 2020
Sorting sheet for EV3 Mindstorms Set (English language)
Purpose
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Printing instructions
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
Turning direction
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
- #831
- 24 Jun 2019
Dispenser mission model. FLLCasts Off-season Challenge 2019
Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.
- #777
- 22 May 2019
FLL 2018: Nightbeast Multi-purpose Attachment. M06, M10, M12
This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge
The run with this attachment is very inconsistent and fails very often.
- #733
- 17 May 2019