Program for the EV3 Kiwi bird robot Lintu

This project is for Lintu - a LEGO Mindstorms EV3 Kiwi bird robot. The project includes three programs, the first is the main program for the robot. It goes forward until it sees a hand next to its beak, then closes it and returns to the starting point, its nest. The second program is an upgrade: the robot not only closes its beak, but also check if there is "food" in it. Both the checking for food and the returning to starting position are made using the motor rotation sensor.

The last program is a fun one. It makes the robot bite!

How to open?

Programs with extension *.ev3 could be opened EV3 Lab Software sometimes referred to as EV3-G. It could be found throught the EV3 Lab Software section on the LEGO Website.

  • #acvhyl
  • 12 May 2019

Courses and lessons with this Program

This Program is used in the following courses and lessons

Image for A robot a "day" keeps the questions awake. Version 2.0 (PRE-RELEASE)
  • 16
  • 5:25
  • 66
Image for Lintu
  • 3
  • 1
  • 4
  • 3d_rotation 1