Umjaho - from the language of the Zulu tribe. It means "competition"
This LEGO Mindstorms EV3 robot has three sensors - touch, color and ultrasonic. When the touch sensor is pressed the robot starts moving. The color sensor is used for following lines and the ultrasonic sensor is used to detect any robots in front of the robot.
Building instructions for LEGO EV3 robot with color wheel that can be rotated through the medium motor. The color wheel is at the front of the robot while there is a color sensor at the back. The color sensor could read the color from another robot. The robot can be used in classes with students to play the telephone game.
An example of a program for controlling the robot could be found at https://www.fllcasts.com/programs/kmeat9-ev3-g-myblock-for-rotating-the-color-wheel-randomly
Playing Football with robots is extremely fun. It could be part of the classes, it could be part of demonstration days. This is the goal keeper.
Playing Football with robots is extremely fun. It could be part of the classes, it could be part of demonstration days. The Striker is a robot for handling the ball and attacking the goalkeeper.
The Sports Utility Vehicle box robot is the new marvelous box robot that we've created. It is designed for teams that would like to learn how to build balanced, stable and working robot chassis following our box principle. It is smaller and easier to build than box robot 1 and it is more simple than box robot 2.
The main advantages of this robot compared to previous box robots are
- motors in the right direction, so when rotating the motor forward, the robot moves forward.
- it is much easier to attach attachments. There are 4 different gears on which you could attach attachments.
- it has a large clearance - which means that it could move over obstacles.
Of course, it has a Gyro and two Color Sensors. Not only that, but we have all the cables shown in the construction.
The SUV Box robot is design to be used with a Gyro sensor and two Color Sensors for alignment. It is not working well for following lines as the sensors are very high and they are very high to allow for high clearance of the chassis. If you need to follow lines we recommend the Dominator X-Y robot
- [How NOT To] Build An Active Attachment For SUV Box Robot
- Simple Pinless Attachment for the SUV Box Robot
Building instructions for the LEGO Mindstorms EV3 Catapult. The robot has a motor, a clutch to control it for manual shooting and a touch sensor for automatic loading. The bottom base is removed which means the Catapult could not be turned around. Nevertheless, the baseless robot is small enough to be built in class.
Building instructions for a simple LEGO EV3 robot built using two large motors and a color sensor. The robot is compact which makes it perfect for following a line. Note that the motors are upside down, which will make the robot go backward when we program it to go forward.
Building instructions for constructing a simple LEGO Model that has red, green, blue and yellow beams. This makes it perfect for operating robots through color code.
Building instructions for LEGO EV3 catching robot. It uses a medium motor to drive system of gears, which is used for catching objects. It, also, has an ultrasonic and colour sensors for detecting the objects.
This is the simplest possible line following robot. It has just one sensor in the front between the two driving wheels and uses beams as pivots instead of a third wheel. Try it out. Follow the building instructions and start following lines in a number of minutes.
This is an example of a robot for Sumo Robotics competitions. Specifically for RoboteX challenge. As most of the Sumo competitions have specific requirements for the robot size this one follows the 15cm x 15cm requirements.
Sumo competitions could be quite fun and interesting as the goal is to push the other robot outside of the ring.
This robot was built by your request. It includes NXT large wheels. The Large LEGOO Mindstorms wheels will give you a faster robot, but be careful, because it will not be that accurate.
This modification of the box robot contains large wheels. It was specially requested by you and we have it.
This is a real competition robot with three light sensors and a gyro.
The CubeHunter uses the ultrasonic sensor to detect a ball or cube. Next, the robot catches it and reads the colour of the object using the EV3 colour sensor. The building instructions are suitable for classes with students and if you are working alone at home.
Again a LEGO animal. This time it looks like an ant. It's interesting that this robot has no wheels and moves in a way very different from the rest of the "wheel robots".
There is much to be learned about mechanics from the way animals move. Ants are a good example. In the real world, an ant could carry a load of 20x its mass. It would be interesting to see how much load could this robot carry? Try it.
Building instructions for a competition robot following the "Box robot" principle. The robot is built with LEGO Mindstorms EV3 and could be used at FLL and WRO.
Second part of the building instructions for this LEGO Mindstorms EV3 competition robot chassis
For World Robotics Olympiad Ball Collection competitions we prepared an interesting Robot Base Chassis that could be extended with a container. The container contains the ping-pong ball. A mechanism collects them. This LEGO Mindstorms EV3 building instructions are for the chassis of the robot and were one of the versions from a series of robots.
