The third version of the EV3 Easy Bot. This is a simple and easy to follow robot, that aims at showing the use of tyres on robots. The robot has a gear up ratio and no tyres, so it is quite fast and entertaining.
The goal of these building instructions is to build a LEGO Mindstorms EV3 robot without wheels. You should then decide on your own how exactly to add the wheel. Which wheels would you use at the front? How are you going to build the third wheel? Here are some recommendations on building the third wheel - 1,2,3,4
Building instructions for a LEGO Mindstorms Robot that cleans the landing site when landing on a different planet. Built from an EV3 set it is a perfect simple tank robot with continuous tracks for lifting and moving things. Basically cleaning.
LEGO Mindstorms EV3 Robot designed for a Folk Race competition. This robot has three Ultrasonic Sensors. Follow the building instructions and at the end, you would have a very basic robot with tank treads that you could directly use.
This is the simplest possible line following robot. It has just one sensor in the front between the two driving wheels and uses beams as pivots instead of a third wheel. Try it out. Follow the building instructions and start following lines in a number of minutes.
The first thing every student wants to build is a LEGO Mindstorms EV3 robot with treads. Well, we have one. Take a look. It's really funny.
Can you make it move? Send us a video or picture in the comment section below.
This is the second version of the EV3 Easy Bot. The robot is used in classes with students as one of the first robots to be built. Easy to follow and to arrive at a construction even for first-time students.
Instructions for building a steering chassis from LEGO EV3 Mindstorms. It uses EV3 Large motor to power the rear wheels and EV3 Medium motor for the steering mechanism. Find building instructions for the remote control here.
This here is a base for a robot that has the brick Upside Down. Have you seen Stranger Things? We would admit that this robot does not look exactly like a 'Demogorgon', but this here is the challenge. Can you use this base and make the robot look like a Demogorgon. Add a picture to the comments section below the material.
Do you have other ideas for Demogorgon? Build them with LEGO and add a picture below this material or send it to [email protected]. We would feature it at FLLCasts.com.
Building instructions for a LEGO Mindstorms EV3 Robot that we call the Five Minute Bot because it could be built in Five Minutes.
Note: If the robot is making inconsistent turns due to the floor, modify the castor wheel so it is placed further back in the construction. Thus the center of mass falls more over the tires and the turns are more consistent.
Again a LEGO animal. This time it looks like an ant. It's interesting that this robot has no wheels and moves in a way very different from the rest of the "wheel robots".
There is much to be learned about mechanics from the way animals move. Ants are a good example. In the real world, an ant could carry a load of 20x its mass. It would be interesting to see how much load could this robot carry? Try it.
Building instructions for a LEGO Mindstorms EV3 robot that could be completed in about 3 minutes. Could you do it? Try it.
We use this robot when we need something very fast for a demonstration or a small competition. Just attach the motors and you are ready. It is fast.
Building instructions for the EasyBot LEGO Mindstorms robot using in many of our courses and tutorials. This EasyBot has two motors and two front wheels. The third wheel is...well, check it out, see how the third wheel is built.
