LEGO MINDSTORMS EV3

This project is for Gen - LEGO Mindstorms EV3 pedalo robot. The program makes the robot follow an imaginary school of fish. It utilizes the gyro sensor to turn the robot accurately, which is a hard task for this robot, because of its strange wheels. Also because of those wheels, the robot usually has a constant steer in one direction, which we correct using the steering block and giving it a steer in the opposite direction!

This is the program for the motorcycle Handlebar.

This project is for Robotics Supreme - LEGO Mindstorms EV3 yacht robot. It contains three programs.

The first one follows a line using one color sensor and detects if the robot has been pushed. Then it plays an alarm and stops the program.

The second program makes the robot go in a square, using the gyro sensor wait-change block. This makes it one of the easiest square solutions there is.

The third program makes the robot follow a direction. That is accomplished similarly to the linefollowing, but instead it uses the gyro sensor and always follows a straight line.

This is the program for the motorcycle Rider.

The programs are designed to be used with Mintonet - a LEGO Volleyball robot.The project consists of several programs:

• Shoot - just shoots the ball.
• ShootWithUltrasonicSensor - this one is pretty much the same, but uses the ultrasonic seonsor infront of the robot as a triger.
• MoveAndShoot - the robot moves sideways until it sees a target and then it shoots the ball at it. This can be either its "volleyball partner" or a box or some other target practice object.
• MoveShootGoBack - the robot moves sideways until it sees a target, shoots the ball and then it returns to its starting position.
• MovePassMove - the robot moves sideways until it sees a target, shoots the ball and then it continues moving. This program is great to be used with second robot and try to pass each other the balls.

EV3-G program developer for the FIRST LEGO League 2019 City Shaper Elevator Mission. The robot calibrates the possible of the attachment and then moves forward and backward to complete the mission

This program is for Uylam - LEGO Mindstorms EV3 Steamship simulator robot. It is made as a lesson, to automatically find the best position for a ship in stormy weather, relative to the waves. The program has two parallel threads. The first one makes the robot move until the gyro sensor detects less amount of shaking done to the ship. Because of all the shaking, the readings of the gyro are all over the place and thats why we made a My Block, which acts like a filter, so that the readings are more accurate. The second thread starts the storm, which is controlled by a Large motor.

NOTE: The program contains my blocks, that will appear broken if you use any version before 1.3.0 of the EV3 Mindstorms Software!

Program for the FIRST LEGO League 2019 City Shaper Swing mission. The attachment is attached on the robot and it we just start the program