With this first tutorial on the Motion Sensor in the LEGO MINDSTORMS Robot Inventor course we demonstrate the basic algorithm for moving in a straight line with the Motion Sensor. From here all the other algorithms are modifications, and if you know the basic it will be easier to tweak the behavior for your particular challenge
This is a 10 runs tutorial that demonstrates how the accuracy of the robot improves when we use slow acceleration vs fast or default acceleration. Note that the improvement is small. This is not an accurate and consistent robot. No. This is a robot that is all but accurate or consistent. It does not use sensors and you should use sensors. But it is a teaching/demonstration moment for everybody to seen what is it that you can expect if you don't use sensors.
In this video tutorial we are demonstrating the impact of slow and fast acceleration on the robot. In the Scratch program there is an acceleration block for fast and slow acceleration. The robot behaves in different way. Let's explore them so that you know what to use for FIRST LEGO League competitions.
This is a tutorial with 10 runs - 5 of them are slow and 5 of them are fast and we measure how accurate the robot is each time. How consistent is it? Can it arrive consistently on a specific location on the field without the use of the sensors? The quick answer is - No, it can not. But let's see it life
In this video tutorial we use a LEGO MINDSTORMS Robot inventor robot and we do an experiment and a demonstration with it. We demonstrate what is the difference in the consistency and accuracy of the robot when we move slow and when we move fast. For FLL, WRO competitions there is always this balance between moving fast and moving slow.
Continuing from the last tutorial, we demonstrate the consistency and reliability of the robot when we don't user sensors. The result is pretty obvious - the robot is NOT consistent and reliable. It just makes a lot of mistakes
This is the first video tutorial from our course on LEGO MINDSTORMS Robot Inventor programming. In this tutorial we will start with how do we move without sensors. We will demonstrate a simple program. Our hope with this tutorial is that you will see why moving without sensors is a bad approach.
Without the use of the sensors, make sure that you are at least using "set movement acceleration to slow". In this tutorial we will demonstrate why and how this helps us improve the accuracy and consistency of the robot.
This tutorial in an animated demonstration of how a LEGO Education SPIKE Prime robot could turn precisely at 90 degrees using the Motion Sensor. The goal of the task is to download the program and rotate at exactly 90 degrees. Because of this precise rotation it is easy to know where your robot is on the field and to program the robot to perform in a reproducible way. To download the program check out the courses in which the tutorial is used.
This tutorial demonstrates how a robot moves forward in a straight line with the use of the LEGO Education SPIKE Prime Motion sensor. While the robot is moving we push on the robot at the back, simulating that "something has happened" and the robot then again returns back to the moving straight. To download the program check out the courses in which the tutorial is used.
This tutorial demonstrates how a LEGO Education SPIKE Prime robot could stop when it reaches a wall. FIRST LEGO League competitions are held on tables that have border and it is sometimes useful to use the Ultrasonic sensor to detect the border and stop close to the border. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This tutorial demonstrates how a robot could align to a black line. The code for the program is available in the course. Aligning to black lines is popular at robotics competitions like FIRST LEGO League as it is the primary way to know where you are on the field and to develop a program that is reproducible. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This tutorial shows how quick pinless attachment collects loops. Such attachments are popular at the FIRST LEGO League competition. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This quick pinless attachment is designed for collecting parts by pushing them. It shows the principle of putting a robot of an attachment in a very fast manner. Such attachments are popular at the FIRST LEGO League competition. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Inertia triggered attachments does no require the use of a motor. Let the inertia do all the work. These kinds of attachments are very useful at robotics competitions like FIRST LEGO League and World Robot Olympiad. The robot moves, the attachment falls and grabs the ball. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
One of the simplest tricks in the game - move, complete the mission and leave the attachment with the mission model. You don't have to return the attachment to the base. On some competitions there might be penalties, but it might be worth it, as you save time to complete another mission. This works especially well with large attachments.. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Taking/Grabbing loops is one of the most common mission types at robotics competitions like FIRST LEGO League/World Robotics Olympiad. This tutorial is about an attachment that grabs the loop. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
We call active attachments those that are powered with a motor. This one is in the the mission of lifting levers which is common at robotics competitions like FIRST LEGO League/World Robotics Olympiad. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Reusable attachments are our favorite. They could be used in a number of different scenarios especially on robotics competitions like FIRST LEGO League/World Robotics Olympiad. This tutorial shows how this reusable attachment could accomplish a mission for lifting a lever. It uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This video is about a lever that should be pushed and this lever is connected to an axle. This means the lever should rotate. It is a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. The inspiration for this mission is the FLL 2012 Senior Solutions Oven mission. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this video we are also focusing on lifting a loop as a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. We demonstrated an attachment for lifting a loop. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Lifting a loop is one of the most common missions in different robotics competitions. In this video we demonstrate how we could do "Vertical lift". It is suitable for precise lifting especially when the mission model requires you to lift straight up. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this tutorial we demonstrate how a loops mission could be accomplished with a Push/Pull Attachment. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this tutorial we demonstrate how a Drop Mission could be accomplished with a Drop Attachment. The robot attachment could be adapted to other drop missions in FIRST LEGO League/World Robotics Olympiad and other robotics competitions. The principle is the same. The tutorial uses Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this tutorial we demonstrate how a Flip Mission could be accomplished with a Flip Attachment. The robot attachment could be adapted to other flips in FIRST LEGO League/World Robotics Olympiad and other robotics competitions. The principle is the same. The tutorial uses Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Football with robots could be quite fun. Football with LEGO Mindstorms robots is one of the popular categories for competitions with LEGO Mindstorms Robots.
Cable management is very important on each competition. Cables could get in the way of attachments, levers, different wheels and so on. Brick accessibility is also very important. Do not forget that the brick should be charged from time to time and that you should also be able to access the buttons.