What if the robot could make a mistake and still accomplish the mission? That is what we demonstrate with this tutorial - a few principles for error tolerance and self-correction. Even though we start the robot from a few different places, we manage to complete the mission with the same program every time. We use the LEGO Education SPIKE Prime robot, and we continue directly after the 10 out of 10 tutorial
This video tutorial focuses on accomplishing M05 Angler Fish, M09 Unexpected Encounter, collecting samples for M14 Sample Collection, 3 Krill for M12 Feed the Whale, and Reef Segments for M03 Coral Reef of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run achieves a perfect 10 out of 10 score across these missions in one continuous sequence.
The robot collects and delivers samples, gathers krill and reef segments, pushes the Unknown Creature into the Cold Seep, and engages mission models with precision. The path is optimized for efficiency, combining multiple scoring actions with minimal wasted movement. You can watch the full explaining tutorial here.
This video tutorial focuses on solving M05, M09, collecting samples for M14, 3 Krill for M12, and Reef Segments for M03 of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using Nautiq box robot (a LEGO Education SPIKE Prime robot).
This video tutorial focuses on accomplishing M15 Research Vessel of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot. In this series of test runs, the goal is to achieve 10 out of 10 successful deliveries, with the robot pushing the loaded ship to its destination, releasing it cleanly, and moving to the other launch area without a single failed attempt.
The run uses a pinless attachment with a locking mechanism and friction pins to secure the cargo during movement and allow smooth release upon arrival. The precise programming and stable design ensure consistent performance across the trials.
This video tutorial focuses on accomplishing M15 Research Vessel of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless attachment designed to push the ship loaded with cargo to its destination. After the previous run, the hook part is removed and replaced with a locking component that holds the ship securely during transport.
The locking mechanism uses friction pins to keep the ship stable until it reaches its destination, where it can then be released smoothly. This approach ensures the cargo remains secure throughout the journey while allowing for safe delivery and quick unloading at the final position.
This is a 10 out of 10 video tutorial that focuses on accomplishing M01 Coral Nursery, M02 Shark, M03 Coral Reef, and M04 Scuba Diver of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot).
The robot pushes the shark, flips the coral buds and coral reef, and collects and delivers the Scuba Diver with precision. This efficient multi-mission run is designed for speed and reliability, ensuring maximum points with minimal wasted movement. You can watch the full explaining tutorial here.
This video tutorial focuses on accomplishing M01 Coral Nursery, M02 Shark, M03 Coral Reef, and M04 Scuba Diver of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a two-part pinless attachment designed to complete multiple missions in a single sequence. The small angled surface mounted under the robot flips the coral buds from M01 and pushes the shark from M02, while the front arm catches and delivers the Scuba Diver from the coral nursery to the coral reef support.
The back section of the attachment flips the coral reef from M03 using a friction-pin mechanism that stays straight during travel but drops the horizontal arm at the mission model to push the yellow plate and raise the coral reef. Extra axles on the front arm prevent the Scuba Diver from falling during delivery, ensuring reliable scoring. This coordinated multi-mission approach maximizes efficiency by combining pushing, collecting, and delivering into one smooth run.
In this video tutorial, the Chain Monster box robot accomplishes three missions in a single run from the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. The LEGO Education SPIKE Prime robot uses an active attachment to collect the mini figures, to push a lever, and to deliver the figures to their designated places. The robot starts from the red base and returns to the blue base, performing all these actions in less than 20 seconds - consistently and reliably.
In this video tutorial, we are accomplishing three missions in a single run from the FIRST LEGO League MASTERPIECE season. We are using our new out-of-box LEGO Education SPIKE Prime robot, called Kufar. Have you used such robots? No? Well, let's dive deeper in the construction of out-of-box robots and see how convenient and user-friendly they can be. Take one brick with a couple of sensors and let your imagination run wild as you create the most inventive attachments.
This 10 out of 10 tutorial is a complete uncut recording and it shows how the Chain Monster box robot accomplishes 5 missions in a single run and it does this 10 out of 10 times. It is from the FIRST LEGO League 2022-2023 robotics competition.
In this video tutorial we accomplish 5 missions in a single run with the Chain Monster box robot. It accomplishes 5 missions from the FIRST LEGO League 2022-2023 robotics competition.
In this video we are also focusing on lifting a loop as a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. We demonstrated an attachment for lifting a loop. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this tutorial we demonstrate how a loops mission could be accomplished with a Push/Pull Attachment. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This is a 10 out of 10 tutorial for a 3 missions run. The robot goes out of base and accomplishes 3 missions in a single run. It demonstrates the consistency and reliability of the robot and its program that uses sensors.
In this video tutorial we accomplish 3 missions from the FIRST LEGO League 2022-2023 SUPER POWER robotics competition. The three missions are wind turbine, television, rechargeable battery. The robot uses a program with sensor compared to the previous way we've accomplished the missions with the same robot.
This is a 10 out of 10 video tutorial demonstrating the consistency and reliability of the Kriket robot when accomplishing the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery.
In this video tutorial we accomplish the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery. We demonstrate how 3 missions could be accomplished in the single run and in the same time with a single attachment.
This is the 10 out of 10 version of executing 3 missions in a single run. It worked like a charm! 10 times. We push and collect energy units for the FIRST LEGO League 2022-2023 SUPERPOWERED Challenge competition.
In this video tutorial, we accomplish three missions in a row. It is a little longer and more detailed tutorial, but hey, 3 missions, one after the other. These are the Wind Turbine, where we have to push 3-4 times and collect the energy units, the Watch Television, where we reach the mission model and slightly push, and, of course, the Rechargeable Battery - where we collect the energy units.
This video is about a lever that should be pushed and this lever is connected to an axle. This means the lever should rotate. It is a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. The inspiration for this mission is the FLL 2012 Senior Solutions Oven mission. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
Lifting a loop is one of the most common missions in different robotics competitions. In this video we demonstrate how we could do "Vertical lift". It is suitable for precise lifting especially when the mission model requires you to lift straight up. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
We call active attachments those that are powered with a motor. This one is in the the mission of lifting levers which is common at robotics competitions like FIRST LEGO League/World Robotics Olympiad. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This quick pinless attachment is designed for collecting parts by pushing them. It shows the principle of putting a robot of an attachment in a very fast manner. Such attachments are popular at the FIRST LEGO League competition. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This video tutorial is part of the 10 out of 10 series at FLLCasts and we will demonstrate how to accomplish the FIRST LEGO League 2020 RePlay competition mission called Innovation Project. Our goal is to push the construction to the require place on the field. What you will learn with this tutorial is how to place a random construction in the base and push/pull it to a place on the field 10 out of 10 times.
This is a 10 out of 10 tutorial demonstrating the consistency and reliability of a LEGO Education SPIKE Prime robot when the robot delivers a mission model to a specific position on the field.
In this video tutorial we deliver the Innovation project model from base to the cargo connect marker on the field. The goal of the mission is to deliver. The mission model is assembled before that.
"Sometimes it works, sometimes it does not work" - this is the most common case in FIRST LEGO League competitions. In this tutorial, we demonstrate and discuss such a case where the first part of accomplishing the mission always works but the second part has about 60-70% success rate. The robot is not very consistent. Let's take a moment to see it and explain why so that we can resolve the problem in the next lesson.