This is a very funny robotics hand that you could place on your hand and control with your fingers. Actually quite funny to point at things, to move the three fingers. There are also many things to learn from the gears and its constructions.
It is true that it requires a lot of parts, but its worth it.
Инструкции за дистанционно управление. При него се използва сензор за завъртане, който определя посоката на кормилото, и сензор за допир, който управлява движението. Тук ще откриете инструкции за подходящо шаси.
Дистанционното управление и колата изглеждат заедно така:
Инструкции за най-обикновения хващач, при който се използва само един голям ЛЕГО EV3 мотор. При него има един неподвижен и един подвижен лост.
Building instructions for the LEGO Mindstorms attachment using Rubber Bands
The first of a series of attachments that we add to a World Robotics Olympiad LEGO Mindstorms Robot. The attachment is an example for collecting ping-balls. The robot and the attachment are in the same construction. The attachment is a base for a container that could be extended.
We've separated the BigDaddy robot into a few smaller modules. This teaches modularity and gives you the option to reuse some of the modules and to look at specific modules.
Минтонета (от англ. Mintonette) е името на една от първите версии на волейбол.
Роботът използва два сензора за допир с които да движи оръдието си наляво и надясно. За да стреля използва цветен сензор. На оръдието си има голям мотор отговорен за стрелбата и среден мотор който мести оръдието.
This is a ping-ball containing attachment for a World Robotics Olympiad. The attachment is building with LEGO Mindstorms EV3 parts. It is tiltel so that it is easier for the balls to fall off at certain points, which was part of the missions at the 2015 cmpetition.
This frame holds the motor and ev3 brick used in the catapult. The frame is placed on top of the rotating base and thus could be easily rotated. The brick could be both NXT and EV3
Лабораторията е робот, който ще провери уменията ви по програмиране. Трябва да измерите обема на балона само чрез стойностите измерени от сензорите.
Конструкцията има вентил, с който можете да изпускате балона с различна скорост.
Как точно се поставя балонът в робота е пояснено в този урок.
Инструкции за робот, построен от ЛЕГО Mindstorms EV3. Казва се Франкенщайн, тъй като двата мотора са противоположни.
Building instructions for the catapult that could be placed over the LEGO Mindstorms EV3 Brick. The idea of the catapult it to throw objects. The fact that it is over the brick makes it very convenient to place the motors below the brick and to use the Catapult.
This robot construction itself was used in the FIRST LEGO League Senior Solutions competition
If you take a look at the videos for this attachment you will see a nice idea on taking the track and the ambulance. These two vehicles from the FIRST LEGO League 2013 competition had to be collected and returned back to base.
Built from LEGO Mindstorms EV3 parts.
Building instructions for a LEGO Mindstorms Catapult Motor and Touch Sensor that are used for triggers for firing objects
Advanced LEGO MINDSTORMS EV3 Construction. It has two rear motors and it could rotate the whole from part. It has 4 wheels and is kind of like unique in the Mindstorms world.
Building instructions are not very easy and you need LEGO Education Core and Extension Sets - 45544 and 45560.
Apart from being advanced, it is also quite fun to try to build.
Инструкции за ЛЕГО Mindstorms EV3 робот, който може да се построи за три минути. Можете ли да се справите? Опитайте.
Използваме този робот, когато трябва да направим нещо бързи за демонстрация или малко състезание. Просто прикрепете моторите и сте готови. Бързо е, нали.
Building instructions for the LEGO Mindstorms robot attachment used at the FIRST LEGO League Natures Fury Competition. This robot attachment takes two of the building and moves them without demolishing them. It is a good example of the use of gear wheels and worm gear. The gear wheels move levers in opposite directions.
