Nightbeast Spacer for Run 2
This is one of the spacers that the Nightbeast team used in FLL 2018/19 Into Orbit Challange
- #739
- 27 Apr 2019
This is one of the spacers that the Nightbeast team used in FLL 2018/19 Into Orbit Challange
This is the first VEX training ground for building your driving skils. It is the single player mode field because it is designed for a single robot to run on the field.
Step by step guide on how to add the SD card to the Raspberry pi.
The Raspberry Pi must not be powered.
3D Instructions on how to add a diode to the Raspberry Pi and indicate when the Raspberry Pi is turned on.
A 3D scheme on how to connect the front steering motor to the Raspberry PI. This includes the Motor Driver and the batteries. The rear motor is also on this scene.
In Robopartans classes we needed a few parts the the robot could lift in a competition. These is a box that is suitable for this
You can position the motors on the construction in a number of different ways. We are exploring the advantages and disadvantages of each of them. These are building instructions for the first way to position the LEGO Mindstorms EV3 motors.
Third part of the LEGO Mindstorms BidDaddy Competition Robot.
Download the archive with the models created in the video. My-first-model.ldr is the file created with MLCAD and My-first-model-2.ldr and My-first-model-2.lcd are the files created with LeoCaD.
This is an attachment for the Kriket Box robot that accomplishes multiple missions. The missions are connected with Push and Collect actions and are from the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is a little different than the recording because we improved it a little after that
Mitko is an example for a small robot from LEGO Education SPIKE Prime. It has no sensors, but it has a big container, like a big mouth. So it can collect things, although it can not see them. Like a small animal that is blind, but hungry. Mitko could be used as a base for a robot that needs to collect. In was one of the versions of a robot that we used for a World Robot Olympiad competition.
An active attachment with a locking mechanism designed to carry, deliver and drop a large object without letting it go. It accomplishes the FIRST LEGO League 2021-2022 Large Delivery mission
Мандривник (мандрівник), от украински, означава пътешественик, скитник.
Този робот има формата на ракета. Той се движи с два средни мотора отзад. Безопасно пътуване!
Third version of a reusable gear attachment. In this scenario a single motor could power two different axles in two different directions. If you use it to accomplish a mission do not forget to send us a video. We would love to see it.
This attachment is a demonstration of how easy to detach attachment could be build for LEGO MINDSTORMS Robot Inventor robot where both the robot and the attachment is from the same 51515 set. The principle is useful for accomplishing missions where the mission model should be placed on the FIRST LEGO League field and in the same time should be supported in a way. Check out the tutorial for a demonstration.
This is a complex three parts attachment for the FIRST LEGO League 2020 Replay competition mission called Boccia. The attachment does three things in the same time. It can align to a mission model, It has a contained for boxes that should be dropped and it also has a lever to rotate the boccia target mission model. On top of the that the attachment is working 10 out of 10
This robot attachment is placed at the front of a LEGO Education SPIKE Prime competition robot to facilitate and accomplish the FIRST LEGO League 2020 RePlay Step Counter mission. We can use the attachment or we can skip it.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.