Building Instructions

A simple active attachment that could be added to the Box Robot Chassis.

This is a LEGO Mindstorms EV3 competition robot used in FIRST LEGO League Season 2018-2019 Into Orbit following a Box Robot principle. The robot has passed through the following competitions in Brazil:

Local competition in scho
Regional: Northeast 
National: Rio de Janeiro
International: Uruguay 

The robot is an modular construction that you could easily build upon. It is not entirely "clean" as it has parts of it not optimezed as in the other box robots, but it is a nice example and a great work from the FLL team.  

This is a LEGO Mindstorms EV3 competition robot used in FIRST LEGO League competitions and used by a team in Brazilian regionals. It followsa Box Robot principle. The robot has passed through the following competitions in Brazil:

Local competition in scholl
Regional: Northeast 
National: Rio de Janeiro
International: Uruguay 

It is not entirely "clean" as it has parts of it not optimezed as in the other box robots, but it is a nice example and a great work from the FLL team.  

The central axle of the robot is most of the time the most important. The robot moves forward and does things with this axle. It is important to learn to you could extend such axles, and change the level and position of the extensions.

This is a LEGO Mindstorms EV3/NXT robot attachment. 

These are instructions on how to build the:

• Steel Structure

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

This is an active attachment. Active means that is is power by a motor. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to build a lifting attachment for competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. Lifting is one of the most important parts when accomplishing missions at the competitions. What's interesting is that this attachment changes the orientation of rotation with it's gears. It is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

Here is another great example of a large multi-purpose attachment used in FIRST LEGO League competitions. This one is specifically for the 2017-2018 Hydrodynamics competitions and is doing a number of missions. (01) Pipe removal, (06) Water Treatment and (08) Manhole cover. 

The attachment consists of two parts. The first part is placed on the robot while the second part is in front of the robot and the robot pushes it. While working on the field the robot leaves the second part on the Water Treatment plant and when returning back collects it back and returns to base.

The goal of the attachment is for you to build it and experiment with it with the existing field. Use Box Robot 2 as a robot base on which to add the attachments.   

Two missions in one. This attachment accomplishes the Hydrodynamics Fountain and Faucet missions from the FIRST LEGO League Hydrodynamics 2017-2018 competitions. The attachment shows a really interesting and widely used approach of a single attachment that is used for two, three and even more missions. This is a standard practice for many of the advanced teams, especially those that reach the finals. The based of the robot is the LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro 

Background

Incredible engineering accomplishments like space travel come about in steps. And many huge, progressive sub-goals need to be met before we can forever leave earth and live to tell about it!

Mission

The robot needs to send payload rockets (carts) rolling down the space travel ramp. The first cart is preset and ready to go, but the robot needs to load the other two from the base.

Scores

• Vehicle payload rolled down the space travel ramp: 22
• Supply payload rolled down the space travel ramp: 14
• Crew payload rolled down the space travel ramp: 10
• Possible scores: 0, 10, 14, 22, 24, 32, 36, 46

Scoring Requirements

• For each roll, the cart must be independent by the time it reaches the first track connection ramp. > Note: Only allowed method. Must be observed by the referee.
• Start each payload clearly rolling down the space travel ramp. > Note: Only allowed method. Must be observed by the referee.
• As a mission requirement in any mission, the word “independent” means “not in contact with any of your equipment. > As long as the cart clearly rolls independently past the first track connection, it’s okay if it doesn’t roll all the way east.

(mission descriptions source https://www.first-lego-league.org/)

Probably the largest multi-purpose FLL attachment at FLLCasts. These attached is doing a number of missions at once. 4 of them. You attach it to the robot and start the program. The robot moves and accomplishes a number of missions using only this attachment. At it also has a lot of parts. It is quite large and you can not build it from a single set. But that's ok because you are preparing for a competition, right?

Building instructions for a LEGO Mindstorms EV3 active attachment for changing gears orientations. This is the third attachment from the series.

This is a robot attachment that could be placed at the front of a LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment on the front of the robot. This specific robotics attachment can lift objects. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is an attachment trigger from the robot inertial. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to move with the robot, stop, the attachment activates and it collects a few parts. The goal of the attachment is to collect parts from the field without the use of any motors. It is an easy and quick way to build an attachment for FIRST LEGO League/World Robotics Olympiad and other robotics competition. The principle is the same. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions

These are building instructions for an attachment accomplishing the FIRST LEGO League 2017-2018 Slingshot mission. The based of the robot is LEGO Box Robot Three With Large Wheels and Thee light sensors and one Gyro

For the FIRST LEGO League 2016-2017 Animal Allies we prepared an attachment for lifting the robot. The idea of the attachment is to show how you could lift the whole robot with a system of gear wheels, levers, and scissors constructions.

Built mainly from LEGO Mindstorms EV3 parts but could probably be constructed from NXT sets.

Accomplish three FIRST LEGO League missions at once. This is an interesting Large multi-purpose FLL attachment for a box robot that could be used to accomplish a number of missions with a single exit of the field base. 

This is a robot attachment that could be used to push/pull object. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment for pushing and pulling that could be placed on the robot. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

Background

Space stations allow us to learn about and even practice living in space, but improved technology and new international partners require modules to be easily interchangeable.

Mission

The robot needs to remove and insert modules among the habitation hub’s portholes.

Scores

• Move the cone module completely into the base: 16
• Insert the tube module into the habitation hub port, west side: 16
• Transfer/insert the docking module into the habitation hub port, east side: 14
• Possible scores: 0, 16, 32, 46

Scoring Requirements

• Results must be visible at the end of the match.
• Inserted modules must not be touching anything except the habitation hub. > Needs to be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

This attachment accomplishes the Into Orbit Space Walk Emergency mission from the FIRST LEGO League Into Orbit 2017-2018 competitions. The base robot is the SUV Competition Box Robot from LEGO Mindstorms EV3.

The program for this attachment is at Programs/w415dz-fll-2018-attachment-to-accomplish-the-into-orbit-space-walk-emergency-07-robot-game-missions-program.

Soon we would publish and a video of how the attachment works. 

Building instructions for a LEGO Mindstorms EV3 Active attachment for changing gear orientations