
Инструкции за „Box“ робот. Част 2
Втора част на инструкциите за шасито на този състезателен робот от ЛЕГО Mindstorms EV3.
- #242
- 02 Sep 2016
- 1
This is a category only with mobile robots bases that you could directly build and use for competitions, classes or learning at home.
Втора част на инструкциите за шасито на този състезателен робот от ЛЕГО Mindstorms EV3.
Инструкции за построяването на състезателен робот на принципа на “Box” робота. Този робот е построен с ЛЕГО Mindstorms EV3 и може да се използва на състезания като FLL и WRO.
Първа част на инструкциите за построяване на за шасито на състезателния “box” робот. Роботът е доста голям и затова сме разделили инструкциите на две части – за да ви бъде по-лесно да го построите. Това е втората част.
Този робот е построен от ЛЕГО Mindstorms EV3, като във втората част се използва допълнителна част за стените.
Това е истински състезателен робот с три сензора за светлина и един сензор за ускорение.
Building instructions for a Full LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions.
The instructions for building the improved EV3 Competition Robot by Mic Lowne
Building instructions for a Light LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions
Building instructions for a LEGO Mindstorms Base Chassis with a reversible motor
Note: This robot contains wheels that are from the NXT set.
This modification of the box robot contains large wheels. It was specially requested by you and we have it .
This incredibly compact SPIKE Prime Box Robot is made for competitions like FIRST LEGO League (FLL) and World Robotics Olympiad (WRO). Whakatae (from Maori's word "whakataetae", which means "competitive") is long 17 LEGO units and is with a width of 15 LEGO units. In front of the wheels it has two color sensors which it uses to align. Whakatae also has two Large motors for moving and has two medium motors for attachments!
It's has "V2" in its name, because it's the second version of Whakatae - LEGO Education SPIKE Prime Competition Box robot. The difference between the two is that the first one can be built with only a Large Motor and a Color sensor in addition to the Base set, while this one needs an additional ball bearing. This provides this robot with a lot more stability and can be seen as a true upgrade to the first version.
Разновидност на състезателния робот от EV3, при който отпред има сензори за светлина.
Инструкции за основа за робот от ЛЕГО Mindstorms EV3 с гуми 56mm, вариант 1. Тази основа може да се използва в състезания по роботика като FIRST LEGO League, World Robotics Olympiad и други.
Направихме този робот по ваше желание. При него има големи NXT колела. Големите ЛЕГО Mindstorms колела правят робота по-бърз, но бъдете внимателни, тъй като той вече не е толкова прецизен.
Разполагахме с няколко минути преди да започнем да строим друг робот и ни хрумна идеята за този. Ако искате да построите Box робот, но нямате достатъчно части, това е една добра конструкция, с която може да се упражнявате. При нея има рамка и три мотора, като може да добавите и приставки.
При това шаси за робот от ЛЕГО Mindstorms EV3 брик-ът е вертикално разположен. Това е една интересна идея, която може да бъде много полезна.
Инструкции за построяване на основа за робот от ЛЕГО Mindstorms EV3, която може да се използва във FIRST LEGO League, World Robotics Olympiad или други състезания по роботика.
Light Cooley is an extension of Cooley. We've added two Light/Color sensors to allow for lines to be followed and for the robot to alight to them and we've kept everything Cooley was cool and known about. Build a few attachments for it and take it on a ride for a FIRST LEGO League competition
Building instructions for a Light LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions. Compared with previous versions of this robot, this one has a Gyro Sensor.
This is a version of the Gazon robot that has a single color sensor and is useful for cases where you still have not purchased a second color sensor, but need to start working on the FLL competition season missions