Building Instructions -

• FIRST LEGO League

-

• Ubuntu

Probably the simples trick for pinless attachments that we've found. It is a construction build in just three steps. Simple as that. But it has a lot of potential to teach you how to use pinless attachments. Pinless attachments are very useful during FIRST LEGO League and World Robot Olympiad competitions. 

These are 3D Building instructions for the Oil Platform. You can build them from Bag 2

This attachment accomplishes the Into Orbit Extraction mission from the FIRST LEGO League Into Orbit 2017-2018 competitions. The based of the robot is the SUV Competition Box Robot from LEGO Mindstorms EV3.

The program for this attachment is at https://www.fllcasts.com/programs/2hpdg9-fll-2018-attachment-to-accomplish-the-into-orbit-extraction-05-robot-game-missions-program.

This is the attachment of Team "Nightbeast", with which they solve M01 and M02 from FLL Into Orbit Challenge

Building instructions for the LEGO Mindstorms attachment using Rubber Bands

Building instructions for the Wind Turbine mission model for the FIRST LEGO League 2022 competition. Find the parts in Bag 7

We've separated the BigDaddy robot into a few smaller modules. This teaches modularity and gives you the option to reuse some of the modules and to look at specific modules.

This attachment is part of a second version of attachments for accomplishing the M07, M08 and M15 where we have to push and collect in the FIRST LEGO League 2022-2023 competition. It is for the Kriket Box Robot and we are doing this second version to make sure there are enough examples of how to use the Kriket box robot.

The interesting part about this attachment is how it connects to the robot. The Kriket has two brown axles that are connected to the motors via a gear mechanism. The attachment is attached to these brown axles which transfer the motor movement to the attachment.

This is the Prime Power Switch mission as we've designed it for FLLCasts Off-season Challenge. It it a useful mission to accomplish with different attachments and approaches. The mission is to rotate the lever of the mission model.

The LEGO Mindstorms EV3 version of this mission model is available at Power Switch mission model. FLLCasts Off-season Challenge

This is the attachment to accomplish Fll 2019 M06 mission with the Whakatae. You can see how to attach the attachment to the robot in this tutorial to do.

This is a self aligning passive attachment for rendezvous and meeting between the tube module and the habitation hub.

The program for this attachment is Self Aligning Module Attacher for M06 - Space Station Modules.

There is another program at Self Aligning Module Attacher for M06 - Space Station Modules - another program.

Background

If a satellite doesn’t have the correct velocity and distance from earth, it can fall, drift away, fail to function or get destroyed by debris. Propulsive adjustments need to be performed with precision.

Mission

The robot needs to move one or more satellites to the outer orbit.

Scores

• Move any part of a satellite on or above the area between the two lines of the outer orbit: 8 each
• Possible scores: 0, 8, 16, 24

Scoring Requirements

• Result must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

This is the third type of an active geared attachment. "Active" means that is is power by a motor. "Geared" means that it uses gears. "Reusable" means that you can easily extend the attachment with additional parts - eg - you can reuse it. It shows a basic principle of how power is transferred between different axles that have different orientation in space - like when one of the axles is horizontal and the other is vertical. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad and others. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

This is the attachment of Team "Nightbeast", with which they :
1. Eject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer.
2. Crater Crossing
3. Tries to score a meteoroid( tries to shoot a ball)
From missions M03,M04 and M014 from FLL Into Orbit Challange

Background

Gardening is easy, right? You just need a truckload of rich soil, some rain, sun, fertilizer, helpful bugs, CO₂ and a rake but what if you were orbiting Neptune, in a room the size of a minivan?

Mission

Move the push bar the right distance at the right speed, to get into the green scoring range.

Scores

• Spin the food growth chamber’s colours so the grey weight is DROPPED after green, but before tan, by moving the push bar: 16
• Possible scores: 0, 16

Scoring Requirements

• The result must be visible at the end of the match.
• Spin the food growth chamber’s colors must be spun by moving the push bar. > Only allowed method. Must be oberserved by the referee.

(mission descriptions source: https://www.first-lego-league.org/)

This attachment presents a way to mechanically align the robot to a mission model and solves the Cloud mission from FLL 2014. 

These are 3D Building Instructions for the Immersive Experience mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

An attachment designed for Heavy lifting. It's build with LEGO MINDSTORMS Robot Inventor 51515 and it has a gear wheels mechanism that allows you to increase the torque and lift really heavy things. Build the attachment and check out the tutorial. This will teach you one more principle that you could use for FIRST LEGO League competitions.