Video tutorials -

• Electronics

Arduino programs are developed with a software and this software is downloaded from the http://arduino.cc site.

Developing a program for the Arduino is very easy. We need to do again three thigs:

You have the controller, you have the diode. The controller has a number of pins (holes). Where should you put the diode so that it starts blinking? 

The small holes on the controller are called pins. On our controller we have 32 pins. The more pins that you have, the more elements you can controller with this microcontroller. For this video the interesting pins and 13 and GND

For the current specific example we need two parts - the diode and the controller. In this episode we would show you which part is the controller, which are the jumpers and finally we would choose a diode.

Why: It's an easy and fun example to introduce you to Arduino

How: Presenting questions and trying answer this questions. Experimenting with different tasks.

What: We would like to show you how to control a diode. We would build a device and write programs for this device.

End Result: A blinking diode

It is a hardware/software related course. You need a set with parts. And you need a number of sets for a class of students. You can buy the set from us, from other vendors, from online retailers. It doesn`t matter actually as long as you have the needed parts for the course. We have tried to create a very lean set, but if you can afford to buy additional parts you could create more complex and probably more interesting devices. 

The course is designed for classes of students, but it could also be used personally. Each module should take you about 20 minutes and depending on how long your student hours are and how much time you will leave the students to experiment and solve tasks you could include different numbers of modules in your class.

This is a course for beginners, but the tasks would be interesting and for more intermediate students. We do not expect any previous knowledge from you except for how to divide numbers and use a computer. 

Answering three questions:

Why - because we believe any student and basically anybody must have a basic understanding of how electronic works. This course gives us the chance to present it and to move forward to better and smarter robots.

How - we do videos, we set tasks. You solve them.

What - we are using Arduino. Because it is popular, it is easy and we like it.