The dance mission is one of the most straightforward and easy missions to complete at the FIRST LEGO League competitions. This one is from RePLAY competition. The goal is to reach a specific place on the field and dance with the robot. You will see how we dance and have fun with our robot. Never forget to have fun during the competitions.
This is a 10 out of 10 video tutorial demonstrating the consistency and reliability of the Kriket robot when accomplishing the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery.
This is a 10 out of 10 tutorial where we deliver and drop precisely to complete a FIRST LEGO League 2021-2022 Cargo Connect mission. We reuse the same attachment as in other missions to demonstrate a reusable attachment.
In this video tutorial, we demonstrate a full run of all the missions in the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition, using the MiniBox - a LEGO Education SPIKE Prime robot.
These kinds of runs are extremely useful for teams looking to see how they can tackle the entire range of missions, pushing their accuracy, speed, and self-control to the limit.
Energy storage mission from FIRST LEGO League 2022-2023 is again a two parts mission where we have to drop a few energy units in the mission model, but we also have to pull part of the mission model. In this video tutorial we demonstrate how the Chain Monster LEGO box robot accomplishes this with a multi purpose attachment for box robots.
This is a 10 out of 10 tutorial that demonstrates the consistency and reliability of the robot to complete the Unused capacity mission. In this mission, we do not need any guidance to push the model as it is near the west side where it should arrive.
This is a 10 out of 10 tutorial in which the MiniBox accomplishes M08, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime box robot. In this run, the robot should consistently and reliably deliver the LEGO minifigure to its designated place and then push the M08 camera down the track to shoot the movie scene.
This is a 10 out of 10 video tutorial for the Slide mission at the FIRST LEGO League 2020 RePlay LEGO robotics competition. In the tutorial we demonstrate how to accomplish the mission 10 out of 10 times. At FLLCasts we try to build the attachments to be as consistent in their behavior as possible possible. In this way you know how the attachment along with the LEGO Education SPIKE Prime or LEGO Mindstorms robot will behave.
"Sometimes it works, sometimes it does not work" - this is the most common case in FIRST LEGO League competitions. In this tutorial, we demonstrate and discuss such a case where the first part of accomplishing the mission always works but the second part has about 60-70% success rate. The robot is not very consistent. Let's take a moment to see it and explain why so that we can resolve the problem in the next lesson.
This is the first part of accomplishing M03 Energy Storage with the Kriket Box Robot. In this tutorial we show how to Drop the energy units in the storage. The second part will focus more on how do we pull the element from below the energy storage.
In this video tutorial we demonstrate how to accomplish M03, M04, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster which is a LEGO Education SPIKE Prime robot equipped with two pinless active attachments.
The side attachment uses a gear mechanism to press down a lever and drop the mini figures with loops. It has a more advanced construction with a special lock to prevent the attachment from rotating when mounting it on the robot. Pay attention that the lock should be removed before the start of the run.
We use a special construction to help us align the robot in the base to ensure the robot starts from the same place every time.
In this video tutorial, we demonstrate a reusable attachment. It is the same attachment we've previously used for two other missions. Sometimes we can build such attachments - one attachment that can complete several missions. Yes, the mission is similar - it is Load Cargo, but we are loading the cargo in different places on the field, and that's important.
In this video tutorial, we focus on accomplishing M04, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the MiniBox, a LEGO Education SPIKE Prime box robot equipped with several attachments. The goal of the robot is to deliver the LEGO mini figures to their designated place and then press down the M03 platform to trigger the immersive experience for the viewer in the mission model.
In this part 2 of the LEGO video tutorial we accomplish the pull part of the M03 Energy storage from FIRST LEGO League 2022-2023 SUPER POWERED. Part 1 was about precise dropping, part 2 is about pulling as the model requires it
In this video tutorial we accomplish a robotics competition mission model and we accomplish it 10 out of 10 times. The mission is Pull-up from the FIRST LEGO League 2020 RePLAY competition. The goal of the mission is to pull up the robot on the bar. The robot must not be touching the ground.
In this LEGO robotics video tutorial we will accomplish mission 8 from the FIRST LEGO League 2020 RePlay competition. The name of the mission is Boccia. What you will learn from the video is how to accomplish complex missions that require following a line, aligning to the line and accomplishing many mission models in a single run
This is a 10 out of 10 tutorial in which the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. One run takes less than 5 seconds as the mission model is very close to the base, which is why the video is not that long.
The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. Let's see the consistency of this robot!
This is a 10 out of 10 video tutorial demonstrating the consistency and reliability of a configurable attachment. The attachment is designed to accomplish the FIRST LEGO League 2021-2022 Cargo Connect mission model called Sorting Center. The mission model has 3 cargo objects that could be placed in a different way. The attachment is configurable and before the run we configure it for the specific way in which the mission model is set up before the start of the round.
10 out of 10 is our favorite series of video tutorials and in this one we are looking at the FIRST LEGO League 2021 RePlay competition and the tire flip mission. The goal of the mission is to flip a tire. Two tire. Perfect. We manage to do it each and every try
In this video tutorial, we show how to accomplish M03 of the the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. The robot featured is the Chain Monster box robot, built from LEGO Education SPIKE Prime.
This tutorial focuses specifically on the M03 Immersive Experience as part of a larger run, making it easier for you to learn and replicate the robot's behavior.
This M12 Water reservoir from FIRST LEGO League 2022-2023 is accomplish in two part with the Chain Monster box robot. The first part is in a previous tutorial. This is the second part where we collect the third water unit. We use a passive attachment to collect this unit.
This is a 10 out of 10 video tutorial demonstrating how the MiniBox robot completes M11 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use a LEGO Education SPIKE Prime box robot equipped with a lever to collect the M15 minifigure and a mechanism to rotate the M11 Light Show tower. We've taken a slightly unexpected approach to M11, so be sure to check out the detachable attachment!
This is a recording of a completely perfect, 10 out of 10 accomplishment of a two-part mission - Train tracks, from the FIRST LEGO League 2021-2022 Cargo Connect competition. Due to the proper use of motion and color/light sensors, the robot is 100% consistent and reliable for a non-trivial mission. Even when the robot makes a mistake, it auto-corrects and compensates for this mistake.
In this video tutorial we accomplish the Innovation project mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to build a new construction on the day of the competition and to complete a mission with this new construction. There are a couple of spare parts in the FLL set and building the construction for the innovation project was quite fun.
In this video tutorial, we demonstrate how to accomplish the second part of M8 of the the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster box robot built from LEGO Education SPIKE Prime.
The goal of the mission is to push the M08 rolling camera up the rails. Let's see how the robot does it.
This video tutorial demonstrates the consistency and reliability of the active attachment that pushes the two mission models. The goal is to use both the attachment and the robot to push the mission model and move the truck and the plane after the blue lines.
This video tutorial shows how the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. The run takes less than 5 seconds, so let's dive in!