This page shows all the robotics tutorials listed without specific grouping. Each tutorial is short, on specific topic, has a video. Tutorials are structured in sequence in Courses.
What if the robot could make a mistake and still accomplish the mission? That is what we demonstrate with this tutorial - a few principles for error tolerance and self-correction. Even though we start the robot from a few different places, we manage to complete the mission with the same program every time. We use the LEGO Education SPIKE Prime robot, and we continue directly after the 10 out of 10 tutorial
This video tutorial focuses on solving M05, M09, collecting samples for M14, 3 Krill for M12, and Reef Segments for M03 of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using Nautiq box robot (a LEGO Education SPIKE Prime robot).
This video tutorial focuses on accomplishing M15 Research Vessel of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless attachment designed to push the ship loaded with cargo to its destination. After the previous run, the hook part is removed and replaced with a locking component that holds the ship securely during transport.
The locking mechanism uses friction pins to keep the ship stable until it reaches its destination, where it can then be released smoothly. This approach ensures the cargo remains secure throughout the journey while allowing for safe delivery and quick unloading at the final position.
This video tutorial focuses on accomplishing M01 Coral Nursery, M02 Shark, M03 Coral Reef, and M04 Scuba Diver of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a two-part pinless attachment designed to complete multiple missions in a single sequence. The small angled surface mounted under the robot flips the coral buds from M01 and pushes the shark from M02, while the front arm catches and delivers the Scuba Diver from the coral nursery to the coral reef support.
The back section of the attachment flips the coral reef from M03 using a friction-pin mechanism that stays straight during travel but drops the horizontal arm at the mission model to push the yellow plate and raise the coral reef. Extra axles on the front arm prevent the Scuba Diver from falling during delivery, ensuring reliable scoring. This coordinated multi-mission approach maximizes efficiency by combining pushing, collecting, and delivering into one smooth run.
In this video tutorial, the Chain Monster box robot accomplishes three missions in a single run from the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. The LEGO Education SPIKE Prime robot uses an active attachment to collect the mini figures, to push a lever, and to deliver the figures to their designated places. The robot starts from the red base and returns to the blue base, performing all these actions in less than 20 seconds - consistently and reliably.
In this video tutorial, we are accomplishing three missions in a single run from the FIRST LEGO League MASTERPIECE season. We are using our new out-of-box LEGO Education SPIKE Prime robot, called Kufar. Have you used such robots? No? Well, let's dive deeper in the construction of out-of-box robots and see how convenient and user-friendly they can be. Take one brick with a couple of sensors and let your imagination run wild as you create the most inventive attachments.
In this video tutorial we accomplish 5 missions in a single run with the Chain Monster box robot. It accomplishes 5 missions from the FIRST LEGO League 2022-2023 robotics competition.
In this video tutorial we accomplish 3 missions from the FIRST LEGO League 2022-2023 SUPER POWER robotics competition. The three missions are wind turbine, television, rechargeable battery. The robot uses a program with sensor compared to the previous way we've accomplished the missions with the same robot.
In this video tutorial we accomplish the FIRST LEGO League 2022 missions called Wind Turbine, Television and Rechargeable Battery. We demonstrate how 3 missions could be accomplished in the single run and in the same time with a single attachment.
In this video tutorial, we accomplish three missions in a row. It is a little longer and more detailed tutorial, but hey, 3 missions, one after the other. These are the Wind Turbine, where we have to push 3-4 times and collect the energy units, the Watch Television, where we reach the mission model and slightly push, and, of course, the Rechargeable Battery - where we collect the energy units.
In this video tutorial we deliver the Innovation project model from base to the cargo connect marker on the field. The goal of the mission is to deliver. The mission model is assembled before that.
In this video tutorial, we demonstrate how to gently push an object to accomplish the mission. "Gently" means that we are pushing but not with force. If we push using force, the mission model will fall, and we will not accomplish the mission. We use LEGO Education SPIKE Prime and the Ultrasonic Sensor.
In this video tutorial, we accomplish a FIRST LEGO League mission called The Bridge. We demonstrate how to use a really simple active attachment where the goal of the mission is to push down both parts of the bridge. We do not enter into the programming and we leave it up to you as an exercise.
Step Counter mission model is one of the more interesting mission models at the FIRST LEGO League 2020 RePlay competition. There is a locking mechanism that does not allow us to just push on the mission model to accomplish it, you must push it really slow and to do this 10 out of 10 times it is challenging.
In this FIRST LEGO League video tutorial we accomplish the Step Counter mission from the FLL 2020 RePlay mission. The mission model is quite interesting as it can not be pushed fast and it can not be pushed slowly, because it will jam. The robot must push it with the right speed and this proves to be difficult.
This is a 10 out of 10 video tutorial that is different from the rest. We demonstrate how difficult it is to accomplish a mission and we use an attachment that is working 5 out of 10 times. Our goal with the video is to give everybody the understanding that taking your time to accomplish a mission is the right thing. Most of the 10 out of 10 tutorials at FLLCasts contain solutions and approaches that are working in a repeatable fashion. Not this one. See how difficult it is to accomplish a mission and that we also make mistakes.
This FRIST LEGO League video tutorial is about he Boccia Share mission from FIRST LEGO League 2020 RePlay competition. In the tutorial we demonstrate how to push on a lever to release a mission model part - in this case a box. You have the choice before the competition to cooperate with the other team and to decide if you are going to do the blue or the red box.
This tutorial explains the use of motion and light/color sensors to accomplish a complex mission split into three parts. It gets into detail about how we keep a straight line with the motion sensor, follow a line with the color sensors, and transition between different parts of the program by aligning and detecting lines with the sensor. The goal is to get to a reliable and consistent behavior of the robot. On top of that, it is configurable, as we've left a few parameters that could be set to configure the behavior for a specific robot, venue, lighting, battery level, and wheels friction.
This video tutorial is for the Tire Flip Mission from FIRST LEGO League 2020 RePlay robotics competition. Flip missions are always some of the most interesting and challenging. In this tutorial you would learn how to build an attachment and accomplish a mission that requires you to flip a part, like flipping a coin. Most of the complexity for this mission is in the attachment and not the programming, but this is also way it works perfectly, every single time.
In this video tutorial, we accomplish the FIRST LEGO League 2021-2022 mission called Platooning Trucks. The goal is to connect the two mission models (trucks) to each other and then connect them both to the bridge. It's quite an interesting mission as it involves three mission models.
In this video tutorial, we push two of the mission models with a pinless active attachment with gears. The goal is to push the mission models after the blue lines. This attachment is interesting as it demonstrates a non-straightforward idea of how we can push the mission models. We explain the Scratch program and how we use the motion sensors - you will learn how to turn to a specific angle by using the motion sensor.