Burn an image on an SD card using Etcher Pro Preview

There are many ways to burn the Disk Image on an SD card. We would look at one such example.

To access the full video please subscribe to FLLCasts.com


  • #678
  • 12 Feb 2018


Download and install Etcher. Download the course disk image file. Open the image in etcher and burn the image to the SD Card.


There is a software tool suitable for the family of Windows operating systems, Linux and macOS called Etcher. The Etcher software is located at https://etcher.io/. There are also other, different software tools. If Etcher is not your tool you can use any of the others. Search on the Internet.

The procedure is the following:

  1. Select the image file downloaded from the materials section.
  2. Select the drive - the sd card on which you would like to install the image
  3. Press Flash and you are done... in about 15 minutes. 

It takes time

Burning an image takes time. This one might take anywhere between 10 and 30 minutes depending on many things

Perfect Course SD Card Image with Raspbian OS

This is a disk image containing a Raspbian OS. The image is modified and set up specifically for the Perfect course. It contains all the needed files, libraries and additional tools that we would use in the course. The file is quite large so be prepared to wait some time while downloading.

Checksum: 4d85292f49a9350fcef9f2eb8fd86b77f1c6bd65ce1344848de3e201c9e1d20d

Courses and lessons with this Tutorial

This Tutorial is used in the following courses and lessons

Image for Perfect STEM course. Module 1 - Smart Car with Raspberry PI
  • 118
  • 42:47
  • 136
Image for Prepare SD Card with software
  • 7
  • 0
  • 4
  • 3d_rotation 2