Building Instructions

Second part of the building instructions for this LEGO Mindstorms EV3 competition robot chassis

Building instructions for a competition robot following the "Box robot" principle. The robot is built with LEGO Mindstorms EV3 and could be used at FLL and WRO.

The first part of a box robot chassis for robotics competitions. The robot is quite large and this is why we split it into two parts - to make it easier to construct it. This is the second part. 

The robot is built with LEGO Mindstorms EV3, with an additional part for the walls used in the second part.

Building instructions for a LEGO Mindstorms EV3 Robot that we call the Five Minute Bot because it could be built in Five Minutes.

Note: If the robot is making inconsistent turns due to the floor, modify the castor wheel so it is placed further back in the construction. Thus the center of mass falls more over the tires and the turns are more consistent.

This is a real competition robot with three light sensors and a gyro.

Building instructions for a Full LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions.

The instructions for building the improved EV3 Competition Robot by Mic Lowne

Building instructions for a Light LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions

This is the second version of the EV3 Easy Bot. The robot is used in classes with students as one of the first robots to be built. Easy to follow and to arrive at a construction even for first-time students.

Building instructions for a LEGO Mindstorms Base Chassis with a reversible motor

Note: This robot contains wheels that are from the NXT set.

Attachment frames are used on Base Robot Chassis to make it easier to add and remove attachments very fast. This frame is for the Box Robot 1. It is a single module build with LEGO Mindstorms EV3 parts and it could handle attachment on all sides. 

Building instructions for probably the simplest LEGO Mindstorms EV3 Motorcycle that you could think of. Can you think of a simpler? Build it and send it to us.

The motorcycle has one large and one medium motor. Turns are hard, but we will think of solutions for turns. There are also other motorcycles, more complex ones that you could build

• Handlebar - Chopper Motorcycle built with LEGO Mindstorms EV3

• Ninja - Sports Motorcycle built with LEGO Mindstorms EV3

"How do you build a forklift using only gear wheels and levers without a rake"... Ok, we would admit that is a difficult question. It even sounds difficult. So let's start with something easy. A LEGO Mindstorms EV3 robot. It lifts objects in the air. It uses two gear wheels that work together and then move in different directions and are placed perpendicular to each other... This sentence kind of got difficult again... Let me try again.

Follow the building instructions with these 70+ steps and you will have a very nice robot and you will learn a simple trick of how to use gears and change the directions in which they rotate. 

This modification of the box robot contains large wheels. It was specially requested by you and we have it.

Frame for adding attachments on the robot. When using a frame it is very easy to quickly add and remove pinless attachments from the robot. The whole frame could be removed.

The frame contains parts from LEGO Mindstorms EV3.

Building instructions for the EasyBot LEGO Mindstorms robot using in many of our courses and tutorials. This EasyBot has two motors and two front wheels. The third wheel is...well, check it out, see how the third wheel is built. 

Active robot attachment for the LEGO Mindstorms EV3 Box robot chassis. The attachment is placed on the top of the robot and uses a system of two gear wheels to transfer the motion to a lever and to .... lift things.

The new Spy is a robot with tank treads, which uses one medium motor to turn three things at once. That is achieved by a gear system. Simultaneously the robot turns its two hands up and down, but in opposite directions and its head - left and right.

The robot moves with the help of two tank treads, attached to two Large EV3 Motors.

When you need a LEGO robot attachment to lift heavy things on the competition field. Probably at FIRST LEGO League or World Robotics Olympiad. This attachment uses 4-5 gear wheels to lift a heavy object.

Build with LEGO Mindstorms EV3 parts. 

We love tanks. You love tanks. Everybody loves tanks. Well, not exactly - more like everybody loves machines with chain treads because they are interesting, not that common, very easy to build and could tackle a lot of obstacles.