Building Instructions

In Guarani, "tembias" means "stories."

The robot moves using two motors with large wheels. At the front, it has a force sensor to detect obstacles.

We use this positioning attachment with the Kriket box robot and it's run of five missions in a row

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED built only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This is an alternative model for the FIRST LEGO League 2022-2023 SUPERPOWERED build only with LEGO Education SPIKE Prime parts. The goal of the model is to be able to experiment and learn without the need to have the real parts, that at this moment are almost impossible to find and gather.

This attachment was intended for and tested on the Gazon, LEGO Education SPIKE Prime competition robot. It is meant to help the robot complete the 13th mission of the FLL Cargo Connect competition.

This is a passive attachment used for FIRST LEGO League 2021-2022 Cargo Connect mission called Large Delivery. The attachment has a locking mechanism to lock the large wing to allow us to safely carry it.

Uydu, from Turkish, means satellite.

Instructions for a LEGO SPIKE Prime robot, that has an inbuilt holder for your phone! The robot also moves with 2 medium motors.

This attachment is a demonstration of how easy to detach attachment could be build for LEGO MINDSTORMS Robot Inventor robot where both the robot and the attachment is from the same 51515 set. The principle is useful for accomplishing missions where the mission model should be placed on the FIRST LEGO League field and in the same time should be supported in a way. Check out the tutorial for a demonstration.

This is a light shield over the color sensor. Covered from the light the color sensor is much more precise.

This is a flip attachment. Arguably the flip missions are some of the most interesting on FLL competitions. The purpose of this attachment is to accomplish the FIRST LEGO League 2020 Cell Phone Mission. It contains two four gear wheels. It is an active attachment. It changes the direction with gear wheels. There is a lot one could learn from such an attachment. It is also build only from parts in the LEGO Mindstorms Robot Inventor Set.

This is part one of an FLL 2020 attachment used to accomplish the pull-up bar mission. This is the part of the attachment that stays below the robot. We put the whole robot on this attachment and we move. It is an interesting approach because as we move to the pull up bar this attachment detaches itself from the robot.

These are instructions on how to build the:

• 3x Gray containers

You can find more building instructions and tips and tricks about the competition on this page.

The Bench mission in FIRST LEGO League 2020 was one of the more complex missions during the competition. It involved two things - lifting part of the mission model and bringing it back to base and in the same time dropping 4 different boxes which was difficult to achieve. We came up with two solutions for SPIKE Prime and for Robot Inventor and this is the Robot Inventor solution. Take a look. You will learn how to build complex attachments doing more than one thing at a time.

Are you a football fan? Here are the building instructions you'll need for the construction of the Football Goal, if you decide to play it with a Mindstorms 51515 Robot Inventor set. You'll also need to build the smallest robot Tricky with its Kick the ball attachment. The Mindstorms/Duplo ball is included in the set.

You can find the LEGO set, with which this was built, by following this link.

You can find constructions created to play with Tricky, by following the links below:

1. Bowling Pins
2. Chain Reaction
3. Basketball hoop

The robot is named after the South Pole–Aitken basin, the largest impact crater in the Solar System that has been discovered on the far side of the Moon.

Astronauts, prepare to enter lunar orbit! This robot comes equipped with a stand that can hold a camera or a phone in order to take a picture of the far side of the moon. If your phone or camera does not fit, the stand can be easily modified to suit your needs. With its two motors, Aitken can make both wide and narrow circles around the Moon to ensure the perfect shot!

These are instructions on how to build the:

• Light Tire Flip

You can find more building instructions and tips and tricks about the competition on this page.

This is the VEX advanced skills training ground for building your driving skills. Here you have to pick up the construction and put it on the table at the opposite side of the table and then go to finish. It is the single player mode field because it is designed for a single robot to run on the field.

This table is like the first VEX training ground for developing your driving skills, but is for two robots. The idea is to come first to the final without interfering with the opponent robot. 

100x70 cm

This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.