Bag 7 - Heavy Tire Flip - FIRST LEGO League 2020-2021 RePLAY
These are instructions on how to build the:
- Heavy Tire Flip
You can find more building instructions and tips and tricks about the competition on this page.
- #1131
- 31 Aug 2020
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is a power inventor switch mission model. The goal is to "switch" the power by moving the lever from one side to the other. This is a common mission for FIRST LEGO League competitions.
Containers mission models reworked from a LEGO Mindstorms EV3 version available at 778-containers-mission-models-fllcasts-off-season-challenge-2019 to a LEGO MINDSTORMS Robot Inventor version available in this material. In 3D building instructions for you to construct them.
This is a distance sensor attachment for Gazon 2.0, a LEGO Mindstorms Robot Inventor robot with a single sensor. This attachment is place on the robot whenever we want to work with the LEGO MINDSTORMS Robot Inventor Distance Sensor.
This is part one of an FLL 2020 attachment used to accomplish the pull-up bar mission. This is the part of the attachment that stays below the robot. We put the whole robot on this attachment and we move. It is an interesting approach because as we move to the pull up bar this attachment detaches itself from the robot.
This is a FIRST LEGO League robot attachment for the Step Counter mission from the 2020 RePlay competition. It is a pinless attachment that is optional and could be used on the robot or we can accomplish the mission without the attachment. It is better to use the attachment as this will give us a more smooth and accurate movement of the robot.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
The Bench mission in FIRST LEGO League 2020 was one of the more complex missions during the competition. It involved two things - lifting part of the mission model and bringing it back to base and in the same time dropping 4 different boxes which was difficult to achieve. We came up with two solutions for SPIKE Prime and for Robot Inventor and this is the Robot Inventor solution. Take a look. You will learn how to build complex attachments doing more than one thing at a time.
One of the spacers that the Nightbeast team used in FLL 2018/19 Into Orbit Challange
This is a mission model for a drop mission. The mission model is build from LEGO MINDSTORMS Robot Inventor 51515 set. It is large, we know, but again, we wanted to use only parts from the 51515 set.
These are construction plates used as Mission Model for preparing for FIRST LEGO League competition off season. They are build with LEGO Mindstorms Robot Inventor set and following the idea of the same places with LEGO Education SPIKE Prime construction plates and LEGO Mindstorms EV3 construction plates
This is a robot attachment build only from LEGO Mindstorms Robot Inventor parts and it is used to accomplish the Weight Machine mission at the FIRST LEGO League 2020 competition. It is not a completely accurate attachment but it shows a good idea on how to accomplish the mission.
This is a flip attachment. Arguably the flip missions are some of the most interesting on FLL competitions. The purpose of this attachment is to accomplish the FIRST LEGO League 2020 Cell Phone Mission. It contains two four gear wheels. It is an active attachment. It changes the direction with gear wheels. There is a lot one could learn from such an attachment. It is also build only from parts in the LEGO Mindstorms Robot Inventor Set.
This is a robot attachment built only with parts from LEGO Mindstorms Robot Inventor Set. The goal of the attachment is to accomplish the FIRST LEGO League 2020 RePlay mission call Treadmill. The attachment has two gear wheels that could transfer the power from the motors to the wheel. The wheel is the one that is accomplishing the mission as it rotates and rotates. The attachment is pinless.
The purpose of this attachment is to flip the tires in the FIRST LEGO League 2020 Replay competition. There are two tires on the field. The attachment must flip them and return them to their initial position. This is an extremely interesting attachment that is using friction and force in order to flip the tires.
The second part of the attachment is used to connect the robot with the pull-up bar. This attachment demonstrates a locking mechanism and can hold the weight of the whole robot while the robot is on the pull-up bar.
This is a mission model designed for Off-season competition challenge. It's built with LEGO Education SPIKE Prime following the design of the successful LEGO Mindstorms EV3 versions available at Construction plates mission models. FLLCasts Off-season Challenge with LEGO Mindstorms EV3. Check the courses in which this attachment is used for more information and tutorials on how to use it.