Truck Robot Attachment for FLL Nature's Fury
Building instructions for a LEGO Mindstorms EV3 Truck Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition
- #91
- 15 Nov 2015
- 1
Building instructions for a LEGO Mindstorms EV3 Truck Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition
Building instructions for the Rubber Band Attachment
- note that I have added two angled beams and an axle to illustrate how you could use the slide as an active attachmen;
You can attach a frame around the front wheels to make them more stable and to allow for better aligning. The module extends the front wheel built at BigDaddy Front - front wheels mechanism module for a large LEGO Mindstorms Competition Robot
This is the attachment to accomplish Fll 2019 M08 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.
Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.
This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge
The run with this attachment is very inconsistent and fails very often.
Simple mission model, that can be used for competition preparation in class. The model consists of two parts - a stand that can be fixed on a mat, floor or table using a double sided tape and a barbell. The aim is to either take the barbel from the stand and bring it to a target location or the other way round.
User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.
The construction is built with LEGO Mindstorms EV3
Building instructions for this part of the BigDaddy competition robot
The rotation frame requiers an NXT large double gear wheel that is not available at the EV3 set. You can use the instructions below to construct a similar mechanism from Mindstorms EV3 set
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is a module that looks like a fish's head. It uses a touch sensor for a mouth and is otherwise purely cosmetic. The module is used in Piscis - a LEGO Mindstorms EV3 Fish robot.
This is an attachment for extracting the raw materials. This attachment is made for Kamak box robot.
The program for this attachment is FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot - Demo Program
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.
Remilo comes from esperanto and means paddle.
The robot resembles a boat, but moves on land. It uses two large motors with "paddles" attached to them to move. Because its movement capabilities are limited, it has a gyro sensor to correctly move forward.