This robot is made to serve the best tea in the whole continent! It is based on the Easy Bot from EV3. As its predecessor it is based on LEGO Mindstorms EV3. It uses two large motors to move around. The best part of the robot is the cup holder, that has a cool cup that shows the KISS principle.
This robot is a spin-off of the Useless machine built from LEGO Mindstorms EV3. This robots mission is to be the last to press the button it holds.
Building instructions for a LEGO Mindstorms EV3 robot where the motors are at the back of the horizontally placed brick and they are placed vertically. This construction is difficult to turn with but at the same time is quite high and could be used as a base for different trucks or animals.
Our Lander doesn’t have working parachutes, thrusters, or cushions, but one important feature is realistic … it’s very fragile.
Get the lander to one of its targets intact, or at least get it to base.
(mission descriptions source https://www.first-lego-league.org/)
This WRO robot is designed to collect a lot of ping pong balls in its container. It's built with LEGO Mindstorms EV3 45544 and 45560 sets. These are the LEGO Educational sets. The robot has two chains that collect the balls and push them into the container attachment. This is one of the larges robots we've uploaded at FLLCasts yet. You could learn a lot by following the building instructions and paying attention to the details of how this robot is built. All the alignment, all the connections. Really beautiful.
Robot for collecting ping pong balls used in the World Robotics Olympiad competitions. It is constructed with LEGO Mindstorms EV3
Robot building instructions for a World robotics Olympiad with a large container used for collecting ping-pong balls
These are building instructions for one of the greatest LEGO Mindstorms attachments that we've built. Super simple and easy to follow and at the end, you have an attachment with a rubber band that controls a lever and that could lift objects from the field. It could lift them up. Also because it is with a rubber band you don't need a motor and you could use the motor for other attachments.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
These are instructions prepared by LEGO.
These are the official robot rules for the FIRST LEGO League Hydrodynamics 2017-2018 robot missions.
Another example for a quick pinless attachment build with LEGO Mindstorms EV3 robots.
This is a very funny robotics hand with 3 fingers that you could put on your hand to "Rule the World". It's funny to control it with the touch sensors.
Instructions for building remote control. It uses the rotation sensor to determine the steering and touch sensor for handling the movement. Find building instructions for a suitable chassis here.
Together the controller and the car look like this:
Building instructions for the One Attachment. Built from LEGO Mindstorms EV3 parts and with an Ultrasonic sensor we've used this attachment to accomplish most of the missions at FIRST LEGO League 2013.
SIngle robot attachment, many points.
A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.
This is a robot, designed to easily lift a cup, while still holding it upright. The robot uses one motor attached to the brick to lift the cup to any angle you want. The cup we have added is purely cosmetic, but with a few adjustments, you can make it lift real cups. Be careful around liquids though!
This is another LEGO Mindstorms grabber, but this time it has 4 fingers! They are moved simultaneously by a medium motor. The grabber was taken from Cron - LEGO Mindstorms EV3 Crane.
These are instructions on how to build the:
for the FIRST LEGO League 2019-2020 City Shaper Challenge.
You can find more building instructions and tips and tricks about the competition on this page.
Do you have a friend for a sleepover? This might be the perfect robot for you! It is a football gate, guarded by Fint, the goalkeeper robot. You can control him, by using the remote controller, that consists of two Touch Sensors. Take turns making penalty shots and have a blast with this awesome robot!
What we recommend: