These are all the robot building instructions. By visiting each building instruction you could see the Tutorials and Courses and Lessons in which it is used.
Francesco 2 is inspired by the robot Francesco.
Building instructions for a simple car using an EV3 Large motor for turning the front wheels and EV3 medium motor with differential for driving the rear wheels. Differently, from Francesco, Francesco 2 has space where a locking mechanism is meant to be built for the differential.
This construction demonstrates one way of using а rack with a gear wheel. It allows to turn circular motion in to a liniar one.
Instructions for a simple Crane construction built from LEGO Mindstorms EV3 set. In order to operate properly, you need to add weight at the back of the jib. The most interesting part of the robot is the design of its hand, so examine it closely.
Building instructions for the LEGO Mindstorms EV3 Catapult. The robot has a motor, a clutch to control it for manual shooting and a touch sensor for automatic loading. The bottom base is removed which means the Catapult could not be turned around. Nevertheless, the baseless robot is small enough to be built in class.
![Image for Lever to Axle Y on Multi-axle, power and rotation transmitting box [MAP-RT Box]](https://d2nmr6p48f8xwg.cloudfront.net/content_pictures/pictures/000/001/911/31546915fb1f8dc2c771698bb63897f956865b9cLego-Mindstorms-Lever-To-Motor-Y-At-Multi-Axle-Power-And-Rotation-Providing-Box-Fllcasts.png)
This was an idea. You would we demonstration a multi-axle power and rotation transmitting box. Well, here it is. Build it. Start it. And see how the power from the motor is transmitted through different axles. The lever will demonstrate it.
Building instructions for a simple car using an EV3 Large motor for turning the front wheels and EV3 medium motor with differential for driving the rear wheels.
Interesting and useful attachment for dropping a LEGO human at a specific location. It uses a lever and a gear wheel. When the lever is pressed the wheel rotates.
The attachment is constructed from LEGO Mindstorms EV3 sets.
This is a Camel-like robot. We demonstrate an interesting use of gears to make the Camel walk. Fun and entertaining way to learn how to transform motion.
The CubeHunter uses the ultrasonic sensor to detect a ball or cube. Next, the robot catches it and reads the colour of the object using the EV3 colour sensor. The building instructions are suitable for classes with students and if you are working alone at home.
Attachment used to transfer the motion from the motor from a vertical axle to a horizontal axle. Uses two gear wheels. Could be built with LEGO Mindstorms EV3 and LEGO Mindstorms NXT kits.
This is the third version of the LEGO Mindstorms Grabber. This time we use a LEGO EV3 Medium motor and worm gear to make the two levers move smoothly and symmetrically.
Robot attachment that shows you how a circular motion could be transferred to linear by using a gear and a rack. The final motion is for pushing and pulling things.
The attachment could be built from LEGO Mindstorms EV3 and NXT parts.
This is version 2 of the LEGO Mindstorms Grabber. It makes use of 4 gears to make both levers active.
This robot attachment shows you how to limit the rotation of a lever. It uses two gear wheels to transfer the motion on 90 degrees.
It could be built with LEGO Mindstorms EV3 and NXT versions. Most of the time during competitions like FIRST LEGO League and World Robotics Olympiad you need a lever for just a limited motion
For the FIRST LEGO League 2016-2017 Animal Allies we prepared an attachment for lifting the robot. The idea of the attachment is to show how you could lift the whole robot with a system of gear wheels, levers, and scissors constructions.
Built mainly from LEGO Mindstorms EV3 parts but could probably be constructed from NXT sets.
Building instructions for a competition robot following the "Box robot" principle. The robot is built with LEGO Mindstorms EV3 and could be used at FLL and WRO.
When you need a LEGO robot attachment to lift heavy things on the competition field. Probably at FIRST LEGO League or World Robotics Olympiad. This attachment uses 4-5 gear wheels to lift a heavy object.
Build with LEGO Mindstorms EV3 parts.
A robot attachment placed on the right side of the LEGO Mindstorms Box robot chassis. It uses two gear wheel to move a level. The level could collect things.
Building instructions for a robot for the World Robotics Olympiad Sputnik competition. This is the light version without the lift at the top.
Building instructions for a LEGO Mindstorms EV3 Multi-axles mechanism