Building Instructions -

• FIRST LEGO League

In the LEGO Mindstorms Robot Inventor set there is only one color sensor. The original Gazon is build from LEGO Education SPIKE Prime where there are two light sensors. The idea behind this robot is to be able to build it from Robot Inventor and to use it during FIRST LEGO League competitions

This is a version of the Gazon robot that has a single color sensor and is useful for cases where you still have not purchased a second color sensor, but need to start working on the FLL competition season missions

This is an attachment that could be easily detached. It's built with LEGO Education SPIKE Prime parts and it demonstrates how to build an attachment that could be easily detached. In competitions you need this easy detachment as on FIRST LEGO League/World Robotics Olympiad and other robotics competition you need to save time. The principle is the same. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the course in which this attachment is used for more information and tutorials on how to use it.

Building instructions for a LEGO Mindstorms EV3 active attachment for changing gears orientations. This is the second attachment from the series.

These are instructions on how to build the:

• Crane

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

Background

For rovers in other worlds, getting stuck is definitely not okay! Teams of rovers can help each other, but a lone rover needs to be very careful.

Mission

The robot or whatever agent-craft it sends out needs to cross the craters model completely, by driving directly over it. Not near it. Not around it.

Scores

• Robot or agent-craft crossed the craters model completely: 20
• Possible scores: 0, 20

Scoring Requirements

• All weight-bearing features of the crossing equipment must cross completely between the towers. > Only allowed method. Must be observed by the referee.
• The crossing must be from east to west, and make it completely past the flattened gate. > Only allowed method. Must be observed by the referee.

(mission descriptions source: https://www.first-lego-league.org/)

This robot attachment could be used to throw objects. It's built with LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate a principle and one example of an attachment for throwing. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

After the success of the original Gazon robot from LEGO Education SPIKE Prime, we've decided the build a similar robot, but from LEGO Mindstorms Robot Inventor 51515. Teams are participating in the FIRST LEGO League competition with a LEGO Mindstorms Robot Inventor set and we know it will be helpful. But this robot can not be build from a LEGO Mindstorms Robot Inventor 51515 as the set has only one Color sensor. We've build a version of the Gazon robot to address this specific limitation.

These are instructions on how to build the:

• Swing
• Traffic jam

for the FIRST LEGO League 2019-2020 City Shaper Challenge.

You can find more building instructions and tips and tricks about the competition on this page.

This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.

The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program

Building instructions for the Pinless Rubber Band Attachment:

This is a distance sensor attachment for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. This attachment is place on the robot whenever we want to work with the LEGO Education SPIKE Prime Distance Sensor.

Attachment part of a series of robot attachments for accomplishing the FIRST LEGO League 2013 competition. This specific construction lifts the two vehicles. It uses rubber bands for locking the levers. Take a look at the video tutorials for details explanation on how it works.

Build from LEGO Mindstorms EV3 parts.

Background

Space is quiet and beautiful, but with almost no heat, air, nor air pressure, it could freeze, suffocate, and boil you all at once! Help our spacewalking astronaut “Gerhard” get to safety.

Mission

The robot needs to get Gerhard’s body into the airlock chamber.

Scores

• Astronaut completely in the habitation hub’s airlock chamber: 22 OR
• Astronaut partly in the habitation hub’s airlock chamber: 18
• Possible scores: 0, 18, 22

Scoring Requirements

• For this mission, the word “body” includes all parts except the loop.
• Results must be visible at the end of the match.

(mission descriptions source https://www.first-lego-league.org/)

Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition.    The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time

This is a robot attachment that could be placed on the side of a LEGO Education SPIKE Prime parts and could be used in competitions in robotics like FIRST LEGO League/World Robotics Olympiad. The goal of the attachment is to demonstrate the principle and example of an attachment on the side of the robot. This specific robot attachment can lift objects. It's designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions. Check the courses in which this attachment is used for more information and tutorials on how to use it.

Background

To live away from earth, it would help if we were good at detecting and mining resources under the surfaces of other planets, moons, asteroids, and even comets.

Mission

The robot needs to get all the core samples out of the core site model, then it has options for what to do with them as described here, and in mission M03.

Scores

• Move all four core samples so they are no longer touching the axle that held them in the core site model: 16
• Place the gas core sample so it is touching the mat, and completely in the lander’s target circle: 12 OR
• Place the gas core sample completely in base: 10
• Place the water core sample so it is supported only by the food growth chamber: 8
• Possible Scores: 0, 16, 24, 26, 28, 34, 36

Scoring Requirements

• Results must be visible at the end of the match.

(mission descriptions source: https://www.first-lego-league.org/)

These are 3D Building Instructions for the 3D Cinema mission model for the FIRST LEGO League 2023-2024 MASTERPIECE competition.

This is a pinless attachment built with LEGO Education SPIKE Prime parts and it demonstrates how to use pinless attachments. The goal of the attachment is to quickly place it on the robot without any pins. The attachment is used for pushing. Check out the courses below for more information how to use the attachment. The attachment is designed for Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions