This is a module that is made to look like a mantis' pincers and head. The pincers are powered by a medium motor and the head has an ultrasonic sensor for eyes. This module is used in Mantissa, a LEGO Mindstorms EV3 mantis robot.
This is the good not so old Pesho Bot Chassis with a "two bars" lifting mechanism and a hand. It can be build with any set. Only the omni-wheels are extra, but what is a good robot without an omni-wheels.
The program for this robot is at programs/a6hrcz-pesho-bot-with-two-bars-lifting-mechanism-controls-with-modkit
Building instructions for this LEGO Mindstorms EV3 attachment for the FIRST LEGO League Nature's Fury robotics competition
Grus, from Latin, means Crane.
The Crane uses one motor to turn the hand and one motor to hold the ball. You need to balance the jib first? What can you add to it?
This attachment is accomplishing two missions and partly two more missions from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solves mission 6 - Music concert lights and sounds and mission 7 - Hologram Performance. It partially solves mission 14 - Audience delivery and mission 15 - Expert delivery by delivering Noah the Sound Engineer to the Music Concert area.
This attachment is accomplishing four missions from the FIRST LEGO League 2023-2024. It is for the Chain Monster Robot. It solve mission 3 - Immersive Experience. It partially solves mission 14 - Audience delivery and mission 15 - Expert delivery by delivering Izzy the Skateboarder to the Skate Park and Emily the Visual Effects Director in Cinema.
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment is designed to detach, once it completes its purpose. This is done, so that the team loses less time switching attachments in the base, lowering the chance of human error during the competition.
These are 3D Building Instructions for M08 Artificial Habitat mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Artificial Habitat for additional building possibilities.
3D building instructions for the Power plant mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 10
This attachment demonstrates the principle of dropping a part inside a container. It uses parts only from the LEGO MINDSTORMS Robot Inventor 51515 set. The goal of the attachment is to release a lever that is holding the wheel.
This attachment demonstrates pushing and pulling with a circular motion. It is useful for FIRST LEGO League competitions where you can grad a mission model and bring it back to base or push/pull on a lever.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition at this page.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Cell Phone mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
This is a LEGO Education SPIKE Prime robot attachment for accomplishing the FIRST LEGO League 2020 Replay Tire Flip mission . The attachment is designed for Gazon, LEGO Education SPIKE Prime competition robot.
This magical wardrobe is for little dolls wear and bags. It could be a part of every doll play at any time. Yes. We have daughters.
Do you like playing bowling? How about playing it with a Mindstorms 51515 Robot Inventor set? Well, these are the building instructions for the bowling pins and "playground". In order to play bowling with a robot, you'll first have to build one. This particular construction was created to be used with Tricky - the smallest Inventor robot - and its Kick the ball attachment. You could later spice things up and try to play it with the Turning attachment for Tricky.
You can find the LEGO set, with which this was built, by following this link.
You can find constructions created to play with Tricky, by following the links below:
Time flies when you are having fun! Luckily, we have this robot to keep us on top of our schedule. Tempus is a robot that is made to look like a clock. The two hands are each connected to a motor and are positioned between the two motors. This makes the robot simple to build and effective in showing how a clock works.
These are instructions on how to build the:
You can find more building instructions and tips and tricks about the competition on this page.
This is the attachment to accomplish Fll 2019 M07 mission with the Dominator robot. You can see how to attach the attachment to the robot in this tutorial.
As you might have seen, recently all the cool kids build tensegrity structures. So we decided to make one for those of you who have a Spike prime set and want to build one themselves! In addition this tensegrity structure requires only parts from the set, which means you don't need to tie any strings on beams or other parts!
At the top of the structure we have two fully functional motors! Can you make something cool with them?