In this video tutorial, we demonstrate how to release the cargo of a mission model. This mission model is an Airplane. We have to push a lever down to release it. We use an active attachment with a gear wheel.
This is a 10 out of 10 tutorial that demonstrates the consistency and reliability of the robot to complete the Unused capacity mission. In this mission, we do not need any guidance to push the model as it is near the west side where it should arrive.
In this video tutorial we accomplish the Unused Capacity mission by pushing the mission model outside of the field in the area where we are allowed to touch the robot. We deliver the mission model to the side of the field. Before delivering, we must of course reach it and that's not always easy.
This is a 10 out of 10 tutorial demonstrating the consistency and reliability of a LEGO Education SPIKE Prime robot when the robot delivers a mission model to a specific position on the field.
In this video tutorial we deliver the Innovation project model from base to the cargo connect marker on the field. The goal of the mission is to deliver. The mission model is assembled before that.
Every time we start the robot we want to start from the same place, not only in terms of where we are on the field but also in terms of how are the motors rotate. The motors have an internal sensor for detecting the rotation. Because of this they know how rotated they are. It is a very good practice to always reset the motors before we start a competition run especially at FIRST LEGO League or World Robot Olympiad competitions
In this video tutorial we take a next step in programming reliable and consistent robots and this is to learn how to stop at a second intersection. We need this because most of the time when we want to reach a mission model on a robotics competition field, the model will be located away from us and we must use all kind of technique to reach it. In this tutorial - we stop at a second intersection.
In this video tutorial we demonstrate a really important concept for FIRST LEGO League competitions - you position the robot on the field with depending on timers and rotations. The issue with moving the robot for 10 seconds and then stopping is that every time it is in a different location. Same for rotations. The wheels will slip, the battery will change, something will happen and the robot will not be in the same place every time. This is not consistent and reliable.
In this video tutorial we show how you can build robots that position on the field consistently and reliably by following and line and then aligning to a line. We also demonstrate the concept of "double align" which is quite powerful and even if there were some mistakes they will be handled.
This is one of the last tutorials in the LEGO Education SPIKE Prime programming for Competitions course and it demonstrates what we've all been waiting for - how to reach a mission model from base in a reliable and consistent way when the mission model is on the other end of the field. Naturally what we use are all the different concepts that we've learned in the course and the tutorial is more advanced than the other so if anything is not clear take a look also at the different tutorials an concepts in the course.
This tutorial in an animated demonstration of how a LEGO Education SPIKE Prime robot could turn precisely at 90 degrees using the Motion Sensor. The goal of the task is to download the program and rotate at exactly 90 degrees. Because of this precise rotation it is easy to know where your robot is on the field and to program the robot to perform in a reproducible way. To download the program check out the courses in which the tutorial is used.
This tutorial demonstrates how a robot moves forward in a straight line with the use of the LEGO Education SPIKE Prime Motion sensor. While the robot is moving we push on the robot at the back, simulating that "something has happened" and the robot then again returns back to the moving straight. To download the program check out the courses in which the tutorial is used.
This tutorial demonstrates how a robot could align to a black line. The code for the program is available in the course. Aligning to black lines is popular at robotics competitions like FIRST LEGO League as it is the primary way to know where you are on the field and to develop a program that is reproducible. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This tutorial demonstrates how a LEGO Education SPIKE Prime robot could stop when it reaches a wall. FIRST LEGO League competitions are held on tables that have border and it is sometimes useful to use the Ultrasonic sensor to detect the border and stop close to the border. The attachment uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This video tutorial is part of the 10 out of 10 series at FLLCasts and we will demonstrate how to accomplish the FIRST LEGO League 2020 RePlay competition mission called Innovation Project. Our goal is to push the construction to the require place on the field. What you will learn with this tutorial is how to place a random construction in the base and push/pull it to a place on the field 10 out of 10 times.
The dance mission is one of the most straightforward and easy missions to complete at the FIRST LEGO League competitions. This one is from RePLAY competition. The goal is to reach a specific place on the field and dance with the robot. You will see how we dance and have fun with our robot. Never forget to have fun during the competitions.
This is a 10 out of 10 video tutorial for the Slide mission at the FIRST LEGO League 2020 RePlay LEGO robotics competition. In the tutorial we demonstrate how to accomplish the mission 10 out of 10 times. At FLLCasts we try to build the attachments to be as consistent in their behavior as possible possible. In this way you know how the attachment along with the LEGO Education SPIKE Prime or LEGO Mindstorms robot will behave.
In this video tutorial we accomplish a robotics competition mission model and we accomplish it 10 out of 10 times. The mission is Pull-up from the FIRST LEGO League 2020 RePLAY competition. The goal of the mission is to pull up the robot on the bar. The robot must not be touching the ground.
In this video tutorial we accomplish the Innovation project mission from the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to build a new construction on the day of the competition and to complete a mission with this new construction. There are a couple of spare parts in the FLL set and building the construction for the innovation project was quite fun.
In this video tutorial we accomplish the basketball mission from the FIRST LEGO League 2020 reply competition. We use the LEGO Education SPIKE Prime competition robot called Gazon. You will learn the principles of accomplishing a mission of two parts - put the ball in the basket and lift the basket.
10 out of 10 is our favorite series of video tutorials and in this one we are looking at the FIRST LEGO League 2021 RePlay competition and the tire flip mission. The goal of the mission is to flip a tire. Two tire. Perfect. We manage to do it each and every try
In this LEGO robotics video tutorial we will accomplish mission 8 from the FIRST LEGO League 2020 RePlay competition. The name of the mission is Boccia. What you will learn from the video is how to accomplish complex missions that require following a line, aligning to the line and accomplishing many mission models in a single run
This video tutorial is about accomplishing the Pull-Up bar mission from the FIRST LEGO League 2020 RePlay robotics competition. The goal of the mission is to move with the robot and pull the robot up. With this video tutorial you will learn how to build such attachments and how missions that are about lifting the whole robot could be accomplished. The attachment also makes a very good use of rubber bands.
In this video tutorial we accomplish the Basketball mission 10 out of 10 times. We use one of the more complex attachments for the FIRST LEGO League 2020 RePlay competition. You will see an learn how to successfully and consistently complete a mission that requires the robot to put a ball into a basket and lift the basket, or lift the basket and put the ball into it.
This LEGO robotics video tutorial is a 10 out of 10 run of the one of the most complex missions at the FIRST LEGO League 2021 RePlay competition. As the mission has three parts we are measuring the success rate of each part of the mission. What you can learn from this tutorial is how to achieve three missions in a single run including line following and a lot of aligning
This robotics video tutorial is about the FIRST LEGO League 2020 RePlay competition and how we accomplish the Slide mission with a LEGO Education SPIKE Prime robot. The goal of the Slide mission is to collect two LEGO Mini figures and bring them back to base. We are demonstrating a simple attachment that collects 2 figures placed in an add way. The whole attachment must bring one of the figures up and then back.
The Cell Phone mission is part of the FIRST LEGO League 2020 RePlay competition. The goal of the mission is to flip the Cell Phone. In this video tutorial we use a LEGO Education SPIKE Prime robot to flip the cell phone. This mission is similar to the FLL 2017: How to accomplish Manhole Cover (08th) Mission in FIRST LEGO League 2017-2018.