Can a run be 100% successful and still leave room for improvement? In this 10 out of 10 tutorial for the FLL UNEARTHED season, we evaluate the Smaller Pancake box robot with the shared M05-M07 attachment on Mission 5 and Mission 6.
Two neighboring missions become one efficient run in this FIRST LEGO League 2025-2026 UNEARTHED competition tutorial. The Smaller Pancake box robot carries the combined M05-M07 attachment to release the ore from Mission 6: Forge, raise Mission 5: Who Lived Here, and move the blocks toward the edge for later use.
Fast runs are only valuable when they survive repetition. This 10 out of 10 tutorial tests the Smaller Pancake box robot and the Tip the Scales attachment on Mission 10 in the FIRST LEGO League 2025-2026 UNEARTHED competition.
Rather than forcing the scale down, this solution lets gravity finish the job. In Mission 10: Tip the Scales from the FLL UNEARTHED season, the Smaller Pancake box robot uses a passive pinless attachment to lift the green cover just enough for the scale to tip, then catches the pan as it reverses.
Can a motor-free mechanism repeat a multi-mission run without adjustments? This 10 out of 10 tutorial follows the Smaller Pancake box robot and the Map Reveal and Mineshaft Explorer attachment through M02 and M03 in the FIRST LEGO League 2025-2026 UNEARTHED competition.
One attachment, two mission models, and a lot happening in only a few seconds. During the FLL UNEARTHED season, the Smaller Pancake box robot uses the M02 and M03 attachment to reveal the map, secure the third topsoil section, and send the minecart to the opposing team's field.
Ten consecutive attempts reveal far more than a single polished run. In this FLL 2025-2026 UNEARTHED competition reliability test, the Smaller Pancake box robot and the Surface Brushing attachment take on Mission 01.
Four jobs are packed into one compact run for Mission 01: Surface Brushing in the FIRST LEGO League 2025-2026 UNEARTHED competition. The Smaller Pancake box robot uses the Surface Brushing attachment to settle against the model, clear both soil deposits, capture the brush, and return to base.
Discover why this solution achieves a perfect 10 out of 10 successful runs in the FIRST LEGO League 2025-2026 UNEARTHED competition. Using the Smaller Pancake box robot together with this passive attachment, we analyze the design choices that make the completion of Mission 15: Site Marking and Mission 12: Salvage Operation remarkably consistent.
Learn how to complete Mission 15: Site Marking and Mission 12: Salvage Operation in the FIRST LEGO League 2025-2026 UNEARTHED competition using the Smaller Pancake box robot and this passive attachment.
This video tutorial focuses on accomplishing M05 Angler Fish, M09 Unexpected Encounter, collecting samples for M14 Sample Collection, 3 Krill for M12 Feed the Whale, and Reef Segments for M03 Coral Reef of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run achieves a perfect 10 out of 10 score across these missions in one continuous sequence.
The robot collects and delivers samples, gathers krill and reef segments, pushes the Unknown Creature into the Cold Seep, and engages mission models with precision. The path is optimized for efficiency, combining multiple scoring actions with minimal wasted movement. You can watch the full explaining tutorial here.
This video tutorial focuses on solving M05, M09, collecting samples for M14, 3 Krill for M12, and Reef Segments for M03 of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using Nautiq box robot (a LEGO Education SPIKE Prime robot).
This video tutorial focuses on accomplishing M8 Artificial Habitat of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a simple active pinless attachment mounted at the front of the robot for precise engagement with the mission model.
The goal is a perfect 10 out of 10 runs by positioning all four crabs upright with their yellow bases touching the mat. You can find the full explaining tutorial here.
This video tutorial focuses on accomplishing M8 Artificial Habitat of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a simple active pinless attachment mounted at the front of the robot, designed for precise engagement with the mission model.
The goal is to position all four crabs upright with their yellow bases touching the mat for maximum points, a task requiring careful alignment and controlled movements. While it is possible to complete the mission with fewer crabs upright, this run is programmed for the full score, using dedicated movement commands in a separate run for maximum accuracy. This approach combines a reliable mechanical design with precise navigation to meet the mission’s demanding scoring conditions.
This video tutorial demonstrates a 10 out of 10 on M13 Change Shipping Lanes, along with partial completion of M09 Unexpected Encounter and M12 Feed the Whale in the FIRST LEGO League 2024-2025 SUBMERGED Challenge, using the Nautiq box robot (a LEGO Education SPIKE Prime robot).
This video tutorial focuses on accomplishing M13 Change Shipping Lanes, and partially M09 Unexpected Encounter and M12 Feed the Whale of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot).
In this run, the robot flips the shipping lane model, collects the small Krill, and retrieves the Unknown Creature from the field by pushing on the mission model. These tasks are executed with precision to ensure that the robot not only scores the primary mission points but also safely returns the collected elements back to base. The sequence is optimized to minimize travel time between missions while maintaining accuracy and control over the robot’s attachments.
We use a pinless, three-in-one design attachment for completing multiple missions in one run. At the front, an angled rubber band mechanism handles M13 Change Shipping Lanes, allowing the robot to launch straight from base without extra positioning.
On one side, a passive curtain mechanism like a cage captures the single Krill for M12 Feed the Whale. On top, a secure basket catches the Unknown Creature from M09 Unexpected Encounter after a push with the robot’s back. The attachment is optimized for quick and reliable mission execution without additional motors.
This video tutorial focuses on M01, M02, and M14 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. The Chain Monster box robot (a LEGO Education SPIKE Prime robot) uses a single attachment to accomplish all three missions in sequence. First, it pushes the mission model, then presses down the next one, and finally collects some mini-figures.
In this video tutorial, we demonstrate a full run of all missions without pausing the recording. The competition is the FIRST LEGO League 2023-2024 MASTERPIECE Challenge, and the robot is the Chain Monster - a LEGO Education SPIKE Prime robot.
These kinds of runs are extremely useful for team preparation right before the competition, as they help team members improve their accuracy, speed, and self-control.
This is a 10 out of 10 tutorial in which the MiniBox robot accomplishes the M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. The MiniBox is a LEGO Education SPIKE Prime box robot that uses detachable attachments.
In this run, the robot performs five actions: it collects the M15 minifigure and throws it backward, rotates the chicken for M12, and then pushes and pulls the M13 Craft Creator mission model. All of these actions are completed in under 15 seconds!
This is a video tutorial that demonstrates how to accomplish M06 and M07 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster box robot which is a LEGO Education SPIKE Prime robot equipped with an active attachment with gear wheels, which engage the mission model’s gears to rotate the respective parts. The entire run takes less than 3 seconds, delivering a neat and precise performance.
In this video tutorial, the Chain Monster box robot accomplishes three missions in a single run from the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. The LEGO Education SPIKE Prime robot uses an active attachment to collect the mini figures, to push a lever, and to deliver the figures to their designated places. The robot starts from the red base and returns to the blue base, performing all these actions in less than 20 seconds - consistently and reliably.
In this video tutorial, we focus on M10 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster, a LEGO Education SPIKE Prime robot, equipped with a three-axle attachment. The mission's objective is to lift the sound mixer sliders and position them precisely to score the maximum points. While the mission may seem challenging at first, once you understand how the attachment works and how to properly connect it to the robot, it becomes a breeze. Let’s give it a try!
In this video tutorial, we demonstrate a full run of all the missions in the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition, using the MiniBox - a LEGO Education SPIKE Prime robot.
These kinds of runs are extremely useful for teams looking to see how they can tackle the entire range of missions, pushing their accuracy, speed, and self-control to the limit.
"Sometimes it works, sometimes it does not work" - this is the most common case in FIRST LEGO League competitions. In this tutorial, we demonstrate and discuss such a case where the first part of accomplishing the mission always works but the second part has about 60-70% success rate. The robot is not very consistent. Let's take a moment to see it and explain why so that we can resolve the problem in the next lesson.
This is a 10 out of 10 tutorial in which the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. One run takes less than 5 seconds as the mission model is very close to the base, which is why the video is not that long.
The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. Let's see the consistency of this robot!
In this video tutorial, we demonstrate how to accomplish the second part of M8 of the the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition. We use the Chain Monster box robot built from LEGO Education SPIKE Prime.
The goal of the mission is to push the M08 rolling camera up the rails. Let's see how the robot does it.
This video tutorial shows how the MiniBox robot accomplishes M10 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The MiniBox is a LEGO Education SPIKE Prime box robot that uses a detachable attachment to adjust the sound levels in M10 Sound Mixer and an active attachment to collect the M15 minifigure. The run takes less than 5 seconds, so let's dive in!