In this episode we build a reusable attachment for a LEGO Mindstorms EV3 robot that changes gears orientation and direction. It is one of the most useful attachments that you could use to move levers up/down and right/left. Adding the attachment on the robot takes 2-3 seconds and shows a very useful general principle of how to build reusable attachments.
- 16 Nov 2014
Successful teams have the experience, but even more importantly they have attachments build from previous years that could directly be used in next year missions. We have seen teams that just reuse the last year robot and with small modifications and adaptations use it on this year missions.
In this episode we build such an attachment. You could also use it in classrooms to challenge students to improve speed/power, to use different gear wheel, to solve specific challenges.
What I would challenge you to do is to think of a way to build a similar attachment, but without the grey framework used in the video, but stud part or straight beams. Send your solutions to us at email@example.com or as comments on the page and we could give you feedback on them.
A similar LEGO attachment the previous once, but this one is with a different gear ratio. Again using a frame, two axles and two gears you can change the direction of the motion.
One LEGO gear is powering two LEGO Gears and at the end, from one motor we rotate two axles in opposite directions. Follow the building instructions.
This LEGO Mindstorms Attachment has three gears, one frame and two axles. The goal of the attachment is to use the gears to change the direction in which the motion is transferred.
In some of the previous episodes I showed you how you can build active attachments that you can put in front of the robot and attach to the driving motor and you can change the direction of the wheel from vertical to horizontal or you can change it in a way that the attachment moves up and down. In this episode I'd like to try to show you how you can build a general attachment because you can see that the problem is actually the same. Whether we place the gear like this or like this, or like this - it's always the same problem. It will be great if we can build a general attachment using, for example, this part and we can place it like this, like this, like this - depending on the movement that we'd like to achieve.
Let's start from what's given. I've decided to use this part. We can combine different wheels - for example, in the following way.
Now, this will be our driving wheel. We can place it in front of the robot. And we should find a way to position this large 30/60 wheel - somehow that it works with the driving wheel. Again, we'll use a different axle.
This is it. We can attach one of the wheels to the motor and the other wheel will be driven by the first one. As you can see, there is a gap - right here - in the axle. As always, we fix this gap with a small yellow part.
And now we already have this general attachment. Can we place it in front of the robot? Yes.
It's not stable and we'll use these two black parts to attach it to the robot.
And we already have our attachment. We can attach anything to the other side of the axle and we can move up and down with this robot.
Now, let's see how this would work. I'll attach this orange part to the axle and when the motor is turning we can see the gears working and now it's pretty easy to build an attachment that would move up and down. We have this as a general, abstract attachment that we can use in different ways - for example: if we want to have an attachment that moves up and down, we place this construction like this; if we want to have an attachment that moves left or right, we just place it like this. Can we do this? Yes. Now, there are certain modifications to this attachment that might be useful depending on the situation, on the mission that should be accomplished. For example, we can use the same parts on the other side of the attachment.
And we'll get a very interesting result. When the driving wheel is turning in one direction, we have one of the driven wheels turning forward; the other one turning backwards. Let's attach it to the robot.
Of course, this might prove useful in certain situations
and it's kind of interesting. Of course, we can place the attachment horizontally.
One more modification that I'd like to show you for this attachment (you can find the instructions for this attachment below the video) is that when the driving wheel is turning left, one of the wheels is turning forward, the other backwards, we might want both wheels to turn in the same direction. To have them turning in the same direction, we should have them on the same axle. So, I'll just extend this one.
When we have the driving wheel turning left or right, we have the driven wheels turning in the same direction. Either both of them forward or both of them backwards. As a last step, I'd like to clean this attachment a little bit. It's kind of ugly, let's say. For example, we have three different sizes of gear wheels on this attachment. We have a medium one - right here. We have a larger and a small one. It's always a good idea to keep the complexity as little as possible. So, I'll try to replace this medium wheel with a small one. To achieve this, let's disassemble the construction. Take the small wheel;
place it like this. And now you can see that there is a certain gap between the wheels. It's not very stable. We can fix it as we have discussed it in previous episodes - by adding one more yellow part. I'll place it right here.
Then the gear wheel.
OK. We have our attachment fixed. We are using only two wheel sizes - the small ones and the larger ones. We can place this on the robot. Like this. One more thing that we should consider is that there is friction between this part that's holding the whole construction and the wheel. Another good idea is to have some space so that we can reduce the friction. If we place this on the robot,
we can see that it's working much more smoothly and it's cleaner when it comes to the design. I hope that you can find a way to use this attachment in your competition robots or in your classroom robots. You can always place the attachment in different ways - for example up and down. And we'll get the same result.
Курсове и занятия включващи този Урок
Този Урок е използван в следните курсове и занятия.