Content for FLL 2020
FLL 2020: How to accomplish the Boccia Target mission with LEGO Mindstorms Robot Inventor
In this video tutorial we accomplish the Boccia mission from the FIRST LEGO League 2020 RePlay competition. We use LEGO Mindstorms Robot Inventor robot. In this mission we use an attachment that does three things in the same time - align, push one lever and drop a couple of boxes in a target. It is a complex attachment and it is worth the watch.
- #1831
- 05 Nov 2021
FLL 2020: 10 out of 10 on how to accomplish the Boccia Target mission with LEGO Mindstorms Robot Inventor
This is a 10 out of 10 video recording about the FIRST LEGO League 2020 RePlay competition and the mission called Boccia Target. We are using LEGO Mindstroms Robot Inventor. The 10 out of 10 recording shows how reproducible the solution to the mission is. You will see a demonstration of a complex attachment that does 3-4 things at once - it alights, pushes, drops, which are all things that are commonly seen at FLL competitions.
- #1832
- 16 Nov 2021
FLL 2020: 10 out of 10 on how to accomplish the Boccia Share mission with LEGO Mindstorms Robot Inventor
This is a 10 out of 10 tutorial where we demonstrate a reproducible completion of a shared mission. The mission is shared as both teams must agree about how they are completing the mission. The tutorials shows the robot approaching the FIRST LEGO League mission model. You will see how the robot pushes on the lever every time for a 10 out of 10 completion.
- #1833
- 17 Nov 2021
FLL 2020: How to accomplish the Boccia Share mission with LEGO Mindstorms Robot Inventor
This FRIST LEGO League video tutorial is about he Boccia Share mission from FIRST LEGO League 2020 RePlay competition. In the tutorial we demonstrate how to push on a lever to release a mission model part - in this case a box. You have the choice before the competition to cooperate with the other team and to decide if you are going to do the blue or the red box.
- #1834
- 16 Nov 2021
FLL 2020: How to accomplish the Cell Phone mission with LEGO Mindstorms Robot Inventor
Similar to the tutorial for the LEGO Education SPIKE Prime this tutorial again accomplishes the cell phone mission. The mission is to flip the phone and is part of the FIRST LEGO League 2020 RePlay competition.
- #1835
- 17 Nov 2021
FLL 2020: 10 out of 10 on how to accomplish the Cell Phone mission with LEGO Mindstorms Robot Inventor
This is a 10 out of 10 tutorial demonstrating the accuracy of a Flip Attachment for the FIRST LEGO League 2020 Cell Phone Mission. The flip attachment flips a phone. Moves forward and flip it. This is a tricky business. It might not work. The trick is to approach the mission model from the right angle. In the tutorial you will see a demonstration and will learn how such a mission could be accomplished accurately with a LEGO Mindstorms Robot Inventor robot and attachment with gear wheels.
- #1836
- 22 Dec 2021
Python program to accomplish FLL 2020 Basketball, with LEGO Education SPIKE Prime
This Python program is for controlling Gazon, LEGO Education SPIKE Prime competition robot to accomplish FIRST LEGO League (FLL) 2020 RePLAY Challenge mission 05 - basketball using Attachment for FLL 2020 RePLAY Basketball mission
- #qnra2m
- 29 Sep 2021
FLL 2020: How to accomplish the Pull-Up bar mission with LEGO MIndstorms Robot Inventor
The goal of the Pull-Up bar mission is to have the robot pull up on the bar... ok.. wording. In this video tutorial we demonstrate an interesting attachment that helps the robot attach to the Pull-Up bar and hang there. How do we do this - with a platform, that brings the robot to the bar and then detaches itself from the robot
- #1839
- 16 Dec 2021
FLL 2020: 10 out of 10 on how to accomplish the Pull-Up bar mission with LEGO Mindstorms Robot Inventor
In this video tutorial we accomplish the Pull-Up bar mission from the FIRST LEGO League 2020. This is a 10 out of 10 tutorial for demonstrating the accuracy of the robot and the attachment. What you will learn is how a two part attachment works.
- #1840
- 16 Dec 2021
FLL 2020: How to accomplish Step Counter mission with LEGO Mindstorms Robot Inventor
In this FLL video tutorial we accomplish the step counter mission. We use a LEGO Mindstorms Robot Inventor robot. The idea of the mission is to control the robot in a very precise way so that it could slowly push on the mission model and accomplish it. In the tutorial we demonstrated exactly this slow push, but in a different way.
- #1841
- 16 Dec 2021
FLL 2020: 10 out of 10 on how to accomplish Step Counter mission with LEGO Mindstorms Robot Inventor
10 out of 10 tutorials are about accomplishing missions in a reliable and repeatable way. In this video tutorials we accomplish the Step Counter mission 10 out of 10 times. We can push on the mission model, but if we push too hard we would lock it and there is no way back. So we use a slightly different approach. Check out the video to see how.
- #1842
- 16 Dec 2021
FLL 2020: How to accomplish the Slide mission with LEGO Mindstorms Robot Inventor
The Slide mission the FIRST LEGO League 2020 is about the LEGO Minifigures sliding down the slide and the robot bringing them back to base. We must somehow bring then back do base. Do we push them on the Slide? Do we pull them? Or we could lift them. In this video tutorial we decided to pull the minifigures, but there is a catch.
- #1843
- 23 Dec 2021
FLL 2020: 10 out of 10 on how to accomplish the Slide mission with LEGO Mindstorms Robot Inventor
10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.
- #1844
- 23 Dec 2021
FLL 2020: How to accomplish the Bench mission with LEGO Mindstorms Robot Inventor
The bench mission was one of the most difficult we've encountered, especially when it comes to accomplishing the mission reliably. The goal of the mission is to push the bench down, lift part of it and leave 4 boxes at specific places. The whole concept of the mission is awesome. Here is how we did it:
- #1845
- 23 Dec 2021
FLL 2020: 10 out of 10 on how to accomplish the Bench mission with LEGO Mindstorms Robot Inventor
The bench mission was a video tutorial that we recorded several times. It was really hard to get it 10 out of 10. The reason was the shear complexity of the mission. There are three things that should happen in this mission at once which was extremely difficult. What you will see in the tutorial is how this attachment behaves
- #1846
- 23 Dec 2021
FLL 2020: 10 out of 10 on how to accomplish Innovation Project with LEGO Mindstorms Robot Inventor
10 out of 10 for the innovation project mission is quite interesting - move forward, return, move forward, return. In the tutorial you will see how we accomplish the mission every team and how the program is repeatable
- #1904
- 28 Jan 2022
FLL 2020 Inventor attachment for Pull-Up-bar mission Part 1
This is part one of an FLL 2020 attachment used to accomplish the pull-up bar mission. This is the part of the attachment that stays below the robot. We put the whole robot on this attachment and we move. It is an interesting approach because as we move to the pull up bar this attachment detaches itself from the robot.
- #1340
- 16 Dec 2021
FLL 2020 Inventor attachment for Pull-Up-bar mission Part 2
The second part of the attachment is used to connect the robot with the pull-up bar. This attachment demonstrates a locking mechanism and can hold the weight of the whole robot while the robot is on the pull-up bar.
- #1341
- 16 Dec 2021