WRO 2023 Senior: Cranes ship
This is the Cranes ship mission model from the World Robot Olympiad 2023 Senior competition in 3D assembly instructions.
- #1624
- 17 Jan 2023
This is the Cranes ship mission model from the World Robot Olympiad 2023 Senior competition in 3D assembly instructions.
Муур (Muur), от нидерландски, означава стена.
Този робот е направен да му е построена стена пред него, за да избутва препятствия и от там получава името си. Можете ли да построите собствена стена?
Муур (Muur), от нидерландски, означава стена.
Този робот е направен да му е построена стена пред него. Тези инструкции са за лесна стена, която можете да дадете на учениците ако не успеят да направят собствена.
This is a mission model for a drop mission. The mission model is build from LEGO MINDSTORMS Robot Inventor 51515 set. It is large, we know, but again, we wanted to use only parts from the 51515 set.
These are construction plates used as Mission Model for preparing for FIRST LEGO League competition off season. They are build with LEGO Mindstorms Robot Inventor set and following the idea of the same places with LEGO Education SPIKE Prime construction plates and LEGO Mindstorms EV3 construction plates
This is a robot attachment build only from LEGO Mindstorms Robot Inventor parts and it is used to accomplish the Weight Machine mission at the FIRST LEGO League 2020 competition. It is not a completely accurate attachment but it shows a good idea on how to accomplish the mission.
This is a robot attachment built only with parts from LEGO Mindstorms Robot Inventor Set. The goal of the attachment is to accomplish the FIRST LEGO League 2020 RePlay mission call Treadmill. The attachment has two gear wheels that could transfer the power from the motors to the wheel. The wheel is the one that is accomplishing the mission as it rotates and rotates. The attachment is pinless.
The purpose of this attachment is to flip the tires in the FIRST LEGO League 2020 Replay competition. There are two tires on the field. The attachment must flip them and return them to their initial position. This is an extremely interesting attachment that is using friction and force in order to flip the tires.
The second part of the attachment is used to connect the robot with the pull-up bar. This attachment demonstrates a locking mechanism and can hold the weight of the whole robot while the robot is on the pull-up bar.
This is a mission model designed for Off-season competition challenge. It's built with LEGO Education SPIKE Prime following the design of the successful LEGO Mindstorms EV3 versions available at Construction plates mission models. FLLCasts Off-season Challenge with LEGO Mindstorms EV3. Check the courses in which this attachment is used for more information and tutorials on how to use it.
This is the creation of my daughter. She said that this is a "Chicken" exhibited in a museum. Which is nice.
You remember Mighty Coffee? Well, my wife is looking at me building Mighty Coffee and is like "Why can't we have a beer?"...yes, the world around me. At the end of the day we had a Mighty Coffee and MBEER and we realized that both of these are not appropriate for 6-10 years old, but nevertheless the children had a lot of fun with them. They were pouring coffee in the beer mug, then put the whole Mighty Coffee into the beer mug they played probably for about an hour. Built from LEGO SPIKE Core set 45678 + LEGO SPIKE Expansion Set 45680 this beer mug is just clean and beautiful. Only with blue frames. As an engineer I tried to construct it the first time with the children and then ask them to construct it without following instructions. Try it. It is like a puzzle. Build it the first time with the 3D Assembly Instruction and the second time without any instruction.
Play time for a week: ~1-2 hours in total.
When there are no "IS-STEP" folders in the SolidWorks Feature Manager we get this model, where the whole model is a single step and a cover - that is the final step. Source file is: Solid Works File
Here is how the instructions looks like in the SolidWorks Feature Manager
This model contains a demonstration of a simple construction with two IS-STEP(s) in the Feature Manager. The folders mean the models has three steps. The first step is the HouseAssam-1, second step is "Flore-4 and Tree-1". Third step is "Flore-1 and Flore2". The final step is the cover of the instructions where we see the whole model. In this way two "IS-STEP" folders produce a model with 4 steps. Source is: Solid Works File
Here is how the instructions looks like in the SolidWorks Feature Manager
This instruction is for the third configuration of the Solid Works File It shows an assembly inside an assembly.
Here is how the instruction looks like in the SolidWorks Feature Manager
This is an attachment for the cases where you need a two touch bumper sensors. It could be placed on almost any LEGO Mindstorms EV3 robot.
Drawing on how to cut a pipe to be able to collect and store balls in this pipe. The sheet format is ISO A4 and the drawing size is real (100% scale)
This is a blueprint of dimensions of the FTC 200 mm axle.
Use this handout material to learn more about the game and how to play it