This robot is robot based on Roberto Chassis. It is equiped with a pushing rack. You can add something to the rack so it can do some other jobs.
The program for this robot is at programs/ajk7i1-roberto-with-rack-for-pushing-to-the-left-and-right-side-vex-iq-robot.
In this 3D scheme, you can see how the motor driver is connected to the Raspberry Pi and to the motor. Follow the steps in the instructions one by one and you will have successfully connected the motor to the Raspberry PI
Инструкции за четвъртия модул, версия 1, на робота Ugbroid - задни колела.
User this flywheels construction for experiments in physics. Start rotating the wheel and they would accumulate energy. You can try to calculate this energy and to measure how fast it would be consumed.
The construction is built with LEGO Mindstorms EV3
Building instructions for this part of the BigDaddy competition robot
The rotation frame requiers an NXT large double gear wheel that is not available at the EV3 set. You can use the instructions below to construct a similar mechanism from Mindstorms EV3 set
A FIRST LEGO League 2023-2024 attachment for the MiniBox Robot.
This attachment uses rubber parts to compensate for the lack of precision in positioning the robot near the mission model. That was needed since at the time that this attachment was used, the robot had moved a long distance since its last aligning at a wall or other mission models.
This attachment accomplishes three missions from the FIRST LEGO League MASTERPIECE. It is for the Chain Monster Robot. It accomplishes Mission 10 - Sound Mixer. It also partially accomplishes Mission 14 - Audience Delivery.
These are 3D Building Instructions for M10 Send over the Submersible mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Send over the Submersible for additional building possibilities.
These are 3D Building Instructions for M09 Unexpected Encounter mission model for the FIRST LEGO League 2024-2025 SUBMERGED competition. You can also check out the alternative mission model for Unexpected Encounter for additional building possibilities.
Кухму, от финландски, означава неравност.
Този робот е направен да прилича на блъскаща количка, но също и да покаже много важен урок - инерция и център на тежестта! Хъбът му е свързан без щифтове за да може да го движите по конструкцията и да променяте центъра на тежестта. Роботът се движи с помощта на два средни мотора с две големи колела на тях. Също така има сензор за сила отпред, за да засече кога се е блъснал!
This is a Kriket box robot attachment used for pushing a lever and precisely dropping energy units. It is used for FIRST LEGO League 2022-2023 SUPER POWERED mission call M03 Energy storage and M11 Hydroelectric Dam. This is a multi-purpose attachment that can do more than one thing at a time.
This attachment helps with the Delivery with Kriket Box Robot. It hold the dinosaur toy while we are carrying it from one end to the other end of the FIRST LEGO League 2022-2023 SUPER POWERED competition. The attachment is passive and we need it just to be sure that the toy will not fell.
This is an attachment for the Chain Monster robot and it accomplished three missions that are all push and deliver. It technically is not used for the M09 dinosaur toy, but this is because the toy is on the robot while the attachment is below the robot
3D building instructions for the water reservoir mission model from the FIRST LEGO League 2022 SUPERPOWERED competition. Find the parts in Bag 12
Мандривник (мандрівник), от украински, означава пътешественик, скитник.
Този робот има формата на ракета. Той се движи с два средни мотора отзад. Безопасно пътуване!
LEGO Attachment user for throwing/shooting a ball. It is powered with one motor and uses the fact that the parts of the LEGO set could bend. Build and experiment with it. Many FIRST LEGO League competitions have missions that could be accomplished with attachments that throw/shoot
