BigDaddy Second Motors Position - second way to position the LEGO Mindstorms motors
Building instructions for this part of the BigDaddy competition robot
- #190
- 22 Mar 2015
- 1
Building instructions for this part of the BigDaddy competition robot
The rotation frame requiers an NXT large double gear wheel that is not available at the EV3 set. You can use the instructions below to construct a similar mechanism from Mindstorms EV3 set
Това е модул, който прилича на глава на риба. Той използва сензор за допир като уста и иначе е изцяло за красота. Модулът се използва в Писцис - LEGO Mindstorms EV3 робот Риба.
This is an attachment for extracting the raw materials. This attachment is made for Kamak box robot.
The program for this attachment is FLL 2018: Attachment To Accomplish The Into Orbit Extraction (05) Robot Game With Kamak - Box Robot - Demo Program
We want students to be able to easily find the parts and to put the parts back in the designated compartments.
Files are printed on both sides of 160-gram sheet of paper A3 format.
The sorting sheet is designed to fit in the cover of the box. To gather in the lid, the excess parts of the printed sheet must be cut off the markers on the front of the sheet.
To extend the life of the sheets, you can laminate them either with a "laminate matte" or a simple laminate. The disadvantage of the simple laminate is that there is a lot of gloss. The disadvantage of laminate matte is that it has to be sealed with a clear PVA C-200 adhesive to prevent it from opening over time.
We recommend printing doublesided and turning over the "short edge", like a book. If you decide, you may flip the printed result over the long side. Both options are available at you local print center.
Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.
Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.
Ремило идва от езика есперанто и означава гребло.
Робота прилича на лодка, но се движи по земя. Използва два големи мотора с закачени "гребла" за да се движи. Заради странния начин на движение, използва жиро сензор за да се движи в правилната посока.
Този модул е направен да изглежда като глава на овен направена с ЛЕГО Майндстормс EV3. Тя използва ултразвуков сензор, който е насочен надолу, все едно овена атакува, като очи. Може да се комбинира с други модули за да се направи перфектният робот-овен!
Този модул е направен да изглежда и да се движи като платна на истински кораб! Модулът се състои от две мачти, които са свързани за да се движат заедно. Задната мачта е свързана към среден мотор, който може да движи всички платна и също е свързан към жироскопичен сензор, който засича дали целият кораб се е завъртял. Този модул се използва в Йоланда - LEGO Mindstorms EV3 робот кораб.
Building instructions for the construction plates mission models. The models are used in the Road construction mission of FLLCasts Off-season Challenge with LEGO Mindstorms EV3.
This is one of the spacers that the Nightbeast team used in FLL 2018/19 Into Orbit Challange
In Robopartans classes we needed a few parts the the robot could lift in a competition. These is a box that is suitable for this
You can position the motors on the construction in a number of different ways. We are exploring the advantages and disadvantages of each of them. These are building instructions for the first way to position the LEGO Mindstorms EV3 motors.
Third part of the LEGO Mindstorms BidDaddy Competition Robot.