Video tutorials

Programming the LEGO MINDSTORMS Robot Inventor for FIRST LEGO League competitions involves learning how to turn left and right with the robot. There are not precise turns. The robot will make mistakes, because that's what robots do. But nevertheless it is important to learn how to program the robot to turn. We are releasing an additional course that is focused only on programming and how to make the robot consistent in its behavior, but in this tutorial we stop on turning

With this video tutorial we start the course for LEGO MINDSTORMS Robot Inventor and how to successfully program the robot for FIRST LEGO League robotics competition. It is good to have SPIKE Prime or EV3 for the competition. But if you happen to have Robot Inventor, don't be discourage. It is still possible to participate and accomplish a lot with the set.

10 out of 10 for the innovation project mission is quite interesting - move forward, return, move forward, return. In the tutorial you will see how we accomplish the mission every team and how the program is repeatable

The goal of the Innovation project mission is probably to give everybody an easy win on the competition. A mission that does not require an attachment or a complex program and it the same time is quite interesting. In this video tutorial you will see our robot and our innovation project construction, along with how we complete the mission. Hope you like them!

This video tutorial is about flipping tires. We are using a LEGO Mindstorms Robot Inventor and the missing is from FIRST LEGO League 2020-2021 competition called RePlay. In the video you will see how to approach the two tires and how to flip them with an attachment. Then they must be returned back to the black circle.

In this video tutorial we dance with the robot. The goal of the mission is to reach the specific place on the FIRST LEGO League field and to Dance. It is suitable for students that are new and it gives every team a chance to accomplish at least on mission on the competition.

The bench mission was a video tutorial that we recorded several times. It was really hard to get it 10 out of 10. The reason was the shear complexity of the mission. There are three things that should happen in this mission at once which was extremely difficult. What you will see in the tutorial is how this attachment behaves

The bench mission was one of the most difficult we've encountered, especially when it comes to accomplishing the mission reliably. The goal of the mission is to push the bench down, lift part of it and leave 4 boxes at specific places. The whole concept of the mission is awesome. Here is how we did it:

10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.

The Slide mission the FIRST LEGO League 2020 is about the LEGO Minifigures sliding down the slide and the robot bringing them back to base. We must somehow bring then back do base. Do we push them on the Slide? Do we pull them? Or we could lift them. In this video tutorial we decided to pull the minifigures, but there is a catch.

10 out of 10 tutorials are about accomplishing missions in a reliable and repeatable way. In this video tutorials we accomplish the Step Counter mission 10 out of 10 times. We can push on the mission model, but if we push too hard we would lock it and there is no way back. So we use a slightly different approach. Check out the video to see how.

In this FLL video tutorial we accomplish the step counter mission. We use a LEGO Mindstorms Robot Inventor robot. The idea of the mission is to control the robot in a very precise way so that it could slowly push on the mission model and accomplish it. In the tutorial we demonstrated exactly this slow push, but in a different way.

In this video tutorial we accomplish the Pull-Up bar mission from the FIRST LEGO League 2020. This is a 10 out of 10 tutorial for demonstrating the accuracy of the robot and the attachment. What you will learn is how a two part attachment works.

The goal of the Pull-Up bar mission is to have the robot pull up on the bar... ok.. wording. In this video tutorial we demonstrate an interesting attachment that helps the robot attach to the Pull-Up bar and hang there. How do we do this - with a platform, that brings the robot to the bar and then detaches itself from the robot

This is a 10 out of 10 tutorial where we demonstrate a reproducible completion of a shared mission. The mission is shared as both teams must agree about how they are completing the mission. The tutorials shows the robot approaching the FIRST LEGO League mission model. You will see how the robot pushes on the lever every time for a 10 out of 10 completion.

This FRIST LEGO League video tutorial is about he Boccia Share mission from FIRST LEGO League 2020 RePlay competition. In the tutorial we demonstrate how to push on a lever to release a mission model part - in this case a box. You have the choice before the competition to cooperate with the other team and to decide if you are going to do the blue or the red box.

This is a 10 out of 10 video recording about the FIRST LEGO League 2020 RePlay competition and the mission called Boccia Target. We are using LEGO Mindstroms Robot Inventor. The 10 out of 10 recording shows how reproducible the solution to the mission is. You will see a demonstration of a complex attachment that does 3-4 things at once - it alights, pushes, drops, which are all things that are commonly seen at FLL competitions.

In this video tutorial we accomplish the Boccia mission from the FIRST LEGO League 2020 RePlay competition. We use LEGO Mindstorms Robot Inventor robot. In this mission we use an attachment that does three things in the same time - align, push one lever and drop a couple of boxes in a target. It is a complex attachment and it is worth the watch.

This 10 out of 10 tutorials demonstrates how we can accomplish a flip mission with a LEGO Mindstorms Robot inventor in a repeatable way. We manage to flip the tires on almost every try. You will learn and see how the attachment works and is able to push and flip the mission models.