In this video tutorial we would look at the mission run for M06. SPACE STATION MODULES. The missions is to precisely push a mission model into an opening. In almost any FIRST LEGO League competition there are such missions. The tutorial contains only the mission run on the field. We accomplish a single mission.
Using the rack depends on the experience of the team. Based on this a different number of gear wheels and racks would be used.
How great is the great attachment for lifting that we built in this course? How many times can it lift the robot without making an error? How great are your attachments and how could you test them? - the answer is simple. Just try 10 times and they should work at least 9 of them as our attachment is.
"Array initialization" is the first step in every program that involves Arrays. This applies to most programming languages and for EV3-G it is a must.
In this tutorial, we would show you how to initialize the array and how to extract this logic in a new block
It this episode we would present you with our attachment for lifting the robot.
Here is our solution for preventing torsion and bending of the LEGO Mindstorms EV3 axles.
Before moving forward here is the simple task of building the mechanism and extending the legs. Extend the legs to fifteen LEGO units.
How to align the wheels and how much should you push for this solution?
What is the end result? - have the attached on the mission model. What is the mechanism the would make the robot hang on the mission model.
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M04. CRATER CROSSING. These are some of the funniest missions at this robotics competition. Try to move over an obstacle with a robot and if you manage to return back to base without bumping into other mission models that would be great.
There were a few problems with the 40 teeth gears that we were using. Let's list some of them
Building a rack is a very important skill during competitions. You should try to build one, learn how to use it and have it as a tool for you next robots. But for this particular BoxRobot, we will not continue with a rack.
The most stressed wheel in our system is the driven wheel. We've already fixed the problem with the driving wheel of the scissor mechanism and now it is time to look at the drive LEGO Mindstorms wheel.
The M08. AEROBIC EXERCISE is one of the very common types of mission in FIRST LEGO League robotics competitions. I think this pattern of missions was first introduced with the growing abilities of the participating students that were constantly reaching the maximum number of points. So the competition introduced mission that require a lot of time - 20-30 seconds, are time consuming and are complex. They requires a lot of moves. This here is a video tutorial on how it could be accomplished
Think of an attachment that leaves the Gecko on the mission model. Don't use the robot attachment that we already have. Just the box robot and the gecko. Nothing should support the Gecko when it is hanged on the mission model.
In this tutorial we accomplish the Elevated places with the Whakatae - LEGO Education SPIKE Prime Competition Box robot mission. It is important to be able to go over the mission model and at the end with a simple mechanism we just push the mission model at the end
This video tutorial contains a detailed explanation on how we accomplish the FIRST LEGO League 2018-2019 Into Orbit mission called M08. AEROBIC EXERCISE. This again is a very interesting mission from the competition. We could learn a lot of basic principles in the field of robotics. This mission requires the robot do to something very fast and many times.
In this tutorial, we add another mission to our current program. This mission is - hanging the Gecko from the FIRST LEGO League Animal Allies.
In this video tutorial we would look at the mission run for M05. EXTRACTION. The mission is to collect and return to base a number of objects that are located on the field. Initially when I first saw the mission I thought it wold be quite challenging to accomplish it, but at the end it is not that difficult.
In the course section for Advance Sensor Calibration we previously showed you how to find the minimum and maximum value for a single LEGO Mindstorms Color Sensor and to store this value in an array. The program was implemented with the EV3-G software. In this tutorial we are going to find the Min and Max for all the four sensors and to store all the 8 values in an array.
Implement a program for stopping at a black line with the blocks containing the implementation details for the InitArray, Calibration and Getting the calibrated result.
Here is the task for adding a beam on both sides of every gear wheel in your attachment.
Experiment with changing the orientation and direction of gear wheels. Here are part of the tasks that you should complete before moving forward with the course.
Following the Advance Light/Color sensors calibration for a minimum value for a single sensor tutorial, in this one, we continue with finding the maximum value detected by a sensor and storing this value in an array.
We calculate the number of rotatios when a gear system is involved. The driving wheel will have to do a number of rotations for the driven wheel to rotate to a desired number of degrees. In our specific case when the driven gear wheel is rotate to about 90 degrees the legs will lift the robot.
Construct two legs for both sides of the robot. The task for this video is to attach this two legs on both sides and to build a system of gears and axles that power those legs.
This is a teacher's note about the math behind calculating gear ratios with for our lifting attachment. It math model we build in previous tutorials is not exactly correct and here is the explanation why.