10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.
In this video tutorial, the MiniBox robot accomplishes M08 and M09 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition.
The MiniBox, a LEGO Education SPIKE Prime box robot, uses a detachable attachment to release the camera down the track for M08 Rolling Camera. Then, with a slight turn, it pulls the M09 Movie Set boat model and positions it in its designated spot. Let's take a look!
This tutorial explains the use of motion and light/color sensors to accomplish a complex mission split into three parts. It gets into detail about how we keep a straight line with the motion sensor, follow a line with the color sensors, and transition between different parts of the program by aligning and detecting lines with the sensor. The goal is to get to a reliable and consistent behavior of the robot. On top of that, it is configurable, as we've left a few parameters that could be set to configure the behavior for a specific robot, venue, lighting, battery level, and wheels friction.
The Slide mission the FIRST LEGO League 2020 is about the LEGO Minifigures sliding down the slide and the robot bringing them back to base. We must somehow bring then back do base. Do we push them on the Slide? Do we pull them? Or we could lift them. In this video tutorial we decided to pull the minifigures, but there is a catch.
This video tutorial demonstrated the use of an active gear attachment for catching a wheel and pulling it. This is how we accomplish the Rowing Mission from the FIRST LEGO League 2021 competition. What you will learn is how such an attachment works. How you transfer power from the top of the robot where the motors are to the bottom of the robot where the catching mechanism is. Check out the building instructions for the attachment.
This is a programming video tutorials. It uses LEGO Education Word Blocks which is the scratch version. We enter into details of how to accomplish missions in a tight spot, how to align the robot and how to make it repeatable.
In this video tutorial we accomplish the Pull-Up bar mission from the FIRST LEGO League 2020. This is a 10 out of 10 tutorial for demonstrating the accuracy of the robot and the attachment. What you will learn is how a two part attachment works.
This is a 10 out of 10 tutorial demonstrating the consistency with which the Kufar robot accomplishes M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge season. Kufar is an out-of-the-box LEGO Education SPIKE Prime robot, meaning you don’t need to connect attachments—just slide the brick into the attachment frames.
In this run, the robot collects the mini-figures using a rubber band mechanism, rotates the chicken with a gear mechanism, and pushes and pulls the M13 Craft Creator mission model.
This video tutorial focuses on taking the Research Vessel for M15 of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using Nautiq box robot (a LEGO Education SPIKE Prime robot).
This video tutorial focuses on accomplishing M15 Research Vessel of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless latched attachment mounted under the robot for maximum stability. The attachment features a hook that catches the research vessel and pulls it back to the launch area, after which the hook can be removed and the remaining parts reused for the next run.
Important: Before starting this run, ensure the part that locks the boat for the next run is raised; otherwise, the robot cannot hook the vessel correctly. This simple but effective mechanism allows for a quick and reliable retrieval, setting up the next sequence of missions without additional adjustments.
The goal of the Pull-Up bar mission is to have the robot pull up on the bar... ok.. wording. In this video tutorial we demonstrate an interesting attachment that helps the robot attach to the Pull-Up bar and hang there. How do we do this - with a platform, that brings the robot to the bar and then detaches itself from the robot
The robot slides the people (called “slide figures”) down the slide and moves them to other areas.
Sand is considered completely cleared when the pull activator is past the line on the mat.
No Equipment Constraint: The mission model cannot earn points if it is touching equipment at the end of the match.
No Equipment Constraint: The mission model cannot earn points if it is touching equipment at the end of the match.
Technicians may open ore blocks by hand to reveal the fossilized artifact when completely in home (see Mission 14).
No Equipment Constraint: The mission model cannot earn points if it is touching equipment at the end of the match.
No Equipment Constraint: The mission model cannot earn points if it is touching equipment at the end of the match.
Securely dock the ship that contains the samples and artifacts your team has collected.
Collect samples and artifacts from around the mat so they can be analyzed by scientists in the lab.
Use the ship’s sonar technology to scan the surroundings for nearby objects or animals.
Rearrange the artificial habitat stacks to create safe homes for the crabs and other sea creatures in this area.
Pulleys, gears, and levers are some of the mechanical technologies used to move props to create the special effects for a movie.
Act out the scene by pulling the boat model along.
Many technologies are used to enable all sorts of great creations to be made anywhere.
Release the creation from the craft machine.
Getting a camera into exactly the right position to capture a shot requires a lot of precise movement and great communication with the actors.
Release the camera down the track to shoot the movie scene.
Visual and audio effects make a powerful impact and can be used to help the audience focus on different parts of the performance.
Set up the music concert by switching on the lights and sound.
Augmented reality transforms a piece of art into an experience.
Rotate the statue to reveal an augmented reality experience.
3D technology adds depth and interactivity to the cinema experience, making it more enjoyable.
Trigger the 2D cinema screen to become a 3D experience.
Factories use large amounts of energy to make the products we use such as toys.
Deliver energy units to the toy factory bin and release the mini dinosaur toy.