Teacher's Notes: Solving the seismograph tasks Pro Preview

To access the full video please subscribe to FLLCasts.com

Subscribe

  • #1129
  • 08 Mar 2019

In today’s lesson students’ tables can be used as a field. Pay attention to the times students use in their calculations and prioritize the conditional loop tasks. Robots’ sensitivity will depend on the surface they move on. If the surface is soft, for example laminated floor, the robot will react better as vibrations are stronger. On a hard floor, such as stone or tiles, robots will have a poorer reaction.

Show your students how to solve the first task from the section Gyro Tasks and the task "Program the robot to wait for a 5% difference in the gyro rate reading and to play a sound with the same frequency as the measured rate for 0.1 seconds.".

 

An exemplary solution to the task "Program the robot to display the angle measured by the gyro sensor.":

An exemplary solution to the task "Program the robot to wait for a change in the acceleration of the gyro sensor and play a sound with frequency equal to 1000 plus 20 times the acceleration of the gyro sensor.":

An exemplary solution to the task "Program the robot to say "Hello" or "Goodbye" to guards, by adding a sound block before the Loop Interrupt Block.":

An exemplary solution to the task "Instead of the switch block, program the loop block to wait for 15 seconds.":

Courses and lessons with this Tutorial

This Tutorial is used in the following courses and lessons

Image for Robotics with LEGO - Level 3.0 - Security systems
  • 50
  • 1:03
  • 213
Image for Lesson 4 - Seismic sensor
  • 5
  • 11
  • 7
  • 3d_rotation 1