This is the program for the self aligning passive attachment for rendezvous and meeting between the tube module and the habitation hub. The material is Self Aligning Module Attacher for M06 - Space Station ModulesCreator
This program is for Lifter - an attachment for SUV Box Robot and Into Orbits M09–Strength Exercise material. In this program you may need to change the values in the Wait - Color Sensor blocks if the program is not working properly. The program ses also Gyro sensor, that mean that you have to check do you have a gyro drift. If you have such, turn of the robot and start it again. After turning it on, do not touch the robot until it is completely loaded and ready to run. In that way you are going to cancel the gyro drift.
This Program controls the Module With Aligning Attacher for M08 - Aerobic Exercise. This is a demo program to show how to move robot acurately to the modul. Also how to attach the robot to the modul and acomplish the mission.
MyBlock that makes a turn on specific degrees with minimal inaccuracy.
Input parameters:
The block that constanlty increase the speed while turning. The goal of this is to reduce the acceleration of the robot when it starts turning so that no modules will fall.
There is only one input parameter in this block and this is the Angle on which you want your robot to rotate.
Activate the drop attachment with a python program
This program helps us move forward with the LEGO Education SPIKE Prime robot and the motion sensor. Moving forward and keeping a straight line is important to be able to build a consistent and reliable robot.
This program helps us move forward with the LEGO Education SPIKE Prime robot and the motion sensor. Moving forward and keeping a straight line is important to be able to build a consistent and reliable robot.
If you take a look at the videos for this attachment you will see a nice idea on taking the track and the ambulance. These two vehicles from the FIRST LEGO League 2013 competition had to be collected and returned back to base.
Built from LEGO Mindstorms EV3 parts.
Building instructions for a LEGO Mindstorms EV3 Ambulance Robot Attachment for the FIRST LEGO League 2013 Nature's Fury robotics competition. The attachment grabs the ambulance car and slightly lifts it. The rubber bands help with triggering the attachment at the right time
- note that you could attach it to the brick both sides, depending on which technique you would like to test. Use the video as a reference.
