Building instructions for a Light LEGO Mindstorms EV3 Competition Robot that could be used in LEGO Robotics competitions. Compared with previous versions of this robot, this one has a Gyro Sensor.
Iknathir from armenian means aircraft carrier.
The robot is made to resemble an aircraft carrier. It shoots paper airplanes using two fast spinning wheels. The wheels are connected to a gear up mechanisms which are connected to two Large motors. The motors themselves are connected to a medium motor, which allows them to move towards and outwards the plane so when they reach it, they are spinning at full speed. The plane is placed on a runway which leads it to launch successfully. On the side of the robot, there is a lever with a gyro sensor, which is used to trigger the launching mechanism.
This attachment accomplishes the Into Orbit Extraction mission from the FIRST LEGO League Into Orbit 2017-2018 competitions. The based of the robot is the SUV Competition Box Robot from LEGO Mindstorms EV3.
The program for this attachment is at https://www.fllcasts.com/programs/2hpdg9-fll-2018-attachment-to-accomplish-the-into-orbit-extraction-05-robot-game-missions-program.
This attachment have a guider mechanism that align the robot to the attachment. The attachment woks with SUV Box Robot.
The program is at programs/1zfoc7-module-with-aligning-attacher-for-m08-aerobic-exercise-program
Lifter is an pretty fast and pretty strong attachment that lift up... things... like exercise machine, astronauts and other stuff.
A program for that attachment in Into Orbit 09 - Strength Exercise challenge is located at programs/hm9c06-lifter-an-attachment-for-suv-box-robot-and-into-orbits-m09-strength-exercise-program.
Cody is a robot, designed to move in a straight line. It has a single motor, rotating two wheels. Behind the motor, Cody holds a Color Sensor. These two combined could be programmed to work as a barcode reader, measuring the length of any color beneath the robot.
Building instructions for the speed bump mission model. The models is used in the Speed bump mission of FLLCasts Off-season Challenge 2019.
Building instructions for the dispenser mission model. The models is used in the Logistics mission of FLLCasts Off-season Challenge 2019.
Building instructions for the barrier mission model. The model is used in the Parking Control mission of FLLCasts Off-season Challenge 2019.
Building instructions for the truck mission model. The model is used in the Road assistance mission of FLLCasts Off-season Challenge 2019.
Building instructions for the transportation stands mission models. The models are used in the Precise driving mission of FLLCasts Off-season Challenge 2019.
Building instructions for the container mission models. The models are used in the Automated delivery mission of FLLCasts Off-season Challenge 2019.
Building instruction for the power switch mission model. The model is used in the Power supply mission of FLLCasts Off-season Challenge 2019.
Building instructions for the bowling pins mission models. The models are used in the Bowling mission of FLLCasts Off-season Challenge 2019.
This is the field used in FLLCasts Off-season Challenge 2019. The pdf should be downloaded and printed 1:1. It is best if it is printed on durable canvas such as vinyl. Although we do not recomend it, the field can be printed on regular paper.
Building instructions for the construction plates mission models. The models are used in the Road construction mission of FLLCasts Off-season Challenge with LEGO Mindstorms EV3.
Yolanda comes from the novel "Yolanda, the Black Corsair's Daughter" by Emilio Salgari.
The robot resembles a sailship with two masts. The mast in the back is connected to a medium motor, which allows it to rotate with some limits. The mast also has a gyro sensor in the back. These are placed so that the gyro sensor detects which way "the wind is blowing" and moves the sails that way. The second mast is connected to the first one so that it moves accordingly. The robot also uses two large motors to move.
Remilo comes from esperanto and means paddle.
The robot resembles a boat, but moves on land. It uses two large motors with "paddles" attached to them to move. Because its movement capabilities are limited, it has a gyro sensor to correctly move forward.
This is the attachment of Team "Nightbeast", with which they :
1. M10–Food Production
2. M12–Satellite Orbits
3. Move the Cone Module to base
From Missions M06, M10 and M12 from FLL Into Orbit Challenge
The run with this attachment is very inconsistent and fails very often.
This is the attachment of Team "Nightbeast", with which they :
1. Eject the 2x4 Brick by placing a Regolith Core Sample into the 3D Printer.
2. Crater Crossing
3. Tries to score a meteoroid( tries to shoot a ball)
From missions M03,M04 and M014 from FLL Into Orbit Challange