10 out of 10 tutorials for the Slide mission was a challenge. There were a lot of glitches with different attachments that we built. At the end we have an attachment that is able to reliably pull the mini figures up, then forward,then down which.
The bench mission was one of the most difficult we've encountered, especially when it comes to accomplishing the mission reliably. The goal of the mission is to push the bench down, lift part of it and leave 4 boxes at specific places. The whole concept of the mission is awesome. Here is how we did it:
The bench mission was a video tutorial that we recorded several times. It was really hard to get it 10 out of 10. The reason was the shear complexity of the mission. There are three things that should happen in this mission at once which was extremely difficult. What you will see in the tutorial is how this attachment behaves
In this video tutorial we dance with the robot. The goal of the mission is to reach the specific place on the FIRST LEGO League field and to Dance. It is suitable for students that are new and it gives every team a chance to accomplish at least on mission on the competition.
This video tutorial is about flipping tires. We are using a LEGO Mindstorms Robot Inventor and the missing is from FIRST LEGO League 2020-2021 competition called RePlay. In the video you will see how to approach the two tires and how to flip them with an attachment. Then they must be returned back to the black circle.
This 10 out of 10 tutorials demonstrates how we can accomplish a flip mission with a LEGO Mindstorms Robot inventor in a repeatable way. We manage to flip the tires on almost every try. You will learn and see how the attachment works and is able to push and flip the mission models.
With this video tutorial we start the course for LEGO MINDSTORMS Robot Inventor and how to successfully program the robot for FIRST LEGO League robotics competition. It is good to have SPIKE Prime or EV3 for the competition. But if you happen to have Robot Inventor, don't be discourage. It is still possible to participate and accomplish a lot with the set.
Programming the LEGO MINDSTORMS Robot Inventor for FIRST LEGO League competitions involves learning how to turn left and right with the robot. There are not precise turns. The robot will make mistakes, because that's what robots do. But nevertheless it is important to learn how to program the robot to turn. We are releasing an additional course that is focused only on programming and how to make the robot consistent in its behavior, but in this tutorial we stop on turning
In this video tutorial we demonstrate the behavior of a LEGO Mindstorms Robot Inventor robot when we use the Motion sensor. The Motion sensor was also referred to as Gyro sensor in previous versions of the LEGO Mindstorms Robot. We do not enter into the details of the programming and you can download the programs from the course lesson, but we make a demonstration of how the robot turns to about 95 degrees when we try to turn it to 90 degrees, we explain why and we suggest a way to improve the behavior of the robot.