Each year the FIRST LEGO League robotics Competition involves loops. In this video tutorial I will go through the most common way of taking loops, show its disadvantages and suggest another way to do it.
This video tutorial focuses on accomplishing M15 Research Vessel of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot. In this series of test runs, the aim is to complete 10 out of 10 flawless retrievals, with the robot successfully latching onto the vessel and pulling it back to base every single time.
This is one of the very interesting attachments by the ELM team. It is using rubber bands and some rubber to precisely drop the chicken. Very interesting way. Check it out and try to learn from it.
This video tutorial focuses on taking the Research Vessel for M15 of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using Nautiq box robot (a LEGO Education SPIKE Prime robot).
This video tutorial focuses on accomplishing M15 Research Vessel of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless latched attachment mounted under the robot for maximum stability. The attachment features a hook that catches the research vessel and pulls it back to the launch area, after which the hook can be removed and the remaining parts reused for the next run.
Important: Before starting this run, ensure the part that locks the boat for the next run is raised; otherwise, the robot cannot hook the vessel correctly. This simple but effective mechanism allows for a quick and reliable retrieval, setting up the next sequence of missions without additional adjustments.
In this video lesson I am building a LEGO Mindstorms EV3 active attachment powered by a small gear wheel. The attachment could move up and down, it is very useful for collecting objects. It could easily be adapted and used on other robots.
We are making a parallel with Video Lesson 56 from the series and we are also showing ways to improve the stability of an axle which is most of the time neglected, but could lead to great problems.
This video tutorial focuses on accomplishing M02 Shark, collecting the trident for M14 Sample Collection, and collecting a Krill for M12 Feed the Whale of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). In this series of test runs, our goal is to achieve 10 out of 10 successful attempts, meaning the robot completes all three missions flawlessly in every trial.
The robot uses a pinless attachment with locking beams for stability, enabling it to push the shark into its habitat, trigger a drop wall to catch the Krill, and lower a motorized arm with rubber parts to grab the Trident. This efficient approach ensures consistent results across the attempts while maintaining stability and precision throughout the runs. You can watch the full explaining tutorial here.
In this Episode, we stop at the pinless attachments for the Box Robot 2 and especially for the constructing a frame. This frame is then used for further extending the robot with attachments.
This video tutorial focuses on accomplishing M02 Shark, collecting the trident for M14 Sample Collection, and collecting a Krill for M12 Feed the Whale of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless attachment with two locking beams for stability, featuring two main “chambers” and a motor-powered arm with rubber parts for handling multiple mission elements.
The left chamber is used to push the shark from M02 into its habitat, while the opposite side has a passive beam-trigger mechanism to drop a wall and catch the Krill in front of the shipwreck. The motorized arm slowly lowers to grab the Trident from the bottom using rubber parts, a solution that is not 100% reliable due to the challenge of the element but is the best tested option. The side locking beams are essential for keeping the attachment secured during these precise maneuvers, preventing it from detaching during the run.
This robot could quite possibly be build from a single EV3 core and EV3 resource sets. It uses fewer parts and only three motors. There are additional parts that could be skipped when building the robot and we have added these parts only as to make the construction more complete.
This is a 10 out of 10 video tutorial that focuses on accomplishing M01 Coral Nursery, M02 Shark, M03 Coral Reef, and M04 Scuba Diver of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot).
The robot pushes the shark, flips the coral buds and coral reef, and collects and delivers the Scuba Diver with precision. This efficient multi-mission run is designed for speed and reliability, ensuring maximum points with minimal wasted movement. You can watch the full explaining tutorial here.
In this tutorial we demonstrate how a loops mission could be accomplished with a Push/Pull Attachment. The robot attachment could be adapted to other missions at FIRST LEGO League/World Robotics Olympiad and other robotics competitions that require push/pull. The principle is the same. The tutorial uses Luly, small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
This video tutorial focuses on accomplishing M01 Coral Nursery, M02 Shark, M03 Coral Reef, and M04 Scuba Diver of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a two-part pinless attachment designed to complete multiple missions in a single sequence. The small angled surface mounted under the robot flips the coral buds from M01 and pushes the shark from M02, while the front arm catches and delivers the Scuba Diver from the coral nursery to the coral reef support.
The back section of the attachment flips the coral reef from M03 using a friction-pin mechanism that stays straight during travel but drops the horizontal arm at the mission model to push the yellow plate and raise the coral reef. Extra axles on the front arm prevent the Scuba Diver from falling during delivery, ensuring reliable scoring. This coordinated multi-mission approach maximizes efficiency by combining pushing, collecting, and delivering into one smooth run.
Very simple and basic introduction to the color sensor in the LEGO Mindstorms EV3 set. The first program is to stop at a line. Then we can move from stoping at line to counting lines and even more complex tasks.
This video tutorial focuses on accomplishing M01 Coral Nursery and M03 Coral Reef of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The aim is to see a consistent accomplishment by lifting the coral tree to the coral tree support and delivering reef segments outside the launch area in one smooth sequence.
The robot uses a motor-powered attachment to lift the coral tree precisely while a side holder secures the collected reef segments. This ensures both missions are completed without losing any pieces during movement. You can watch the full explaining tutorial here.
We extract the Proportional Line Following algorithm into a new block with parameters. This allows us to experiment with the Threshold, Constant Speed and Relaxation Coefficient. You can now easily use the block in you other programs without having to implement it.
This video tutorial focuses on accomplishing M01 Coral Nursery and M03 Coral Reef of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless motor-powered attachment specifically designed to raise the coral tree to the coral tree support while delivering reef segments outside the launch area. This attachment was chosen after testing multiple designs, and it proved to be one of the most reliable solutions for this task.
The motor-driven lifting mechanism is mounted using long axle pins due to the gearwheel’s position, and a heavy brick is added on top for extra sturdiness, preventing the attachment from popping off during operation. On the side, a simple holder secures the three reef segments collected in previous runs for easy delivery during this mission. This combination allows the robot to lift the coral tree smoothly, place it accurately, and complete the reef segment delivery in a single, well-coordinated sequence.
This video tutorial contains the final 2 programs for moving straight with a LEGO Mindstorms EV3 robot. The first program is for proportional compensation that just keeps the robot orientation straight, while the second program is for Integral compensation that returns the robot to the straight line when the robot makes a mistake.
This video tutorial focuses on accomplishing M06 Raise the Mast and M07 Kraken’s Treasure of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The point is to achieve a perfect 10 out of 10 score for these interconnected missions in one smooth sequence.
The robot first secures the treasure chest before fully raising the mast, avoiding the mechanism that would otherwise lock the chest in place. This requires precise timing and control to push, lift, and stop at the correct point, then complete the mast-raising motion. You can watch the full explaining tutorial here.
This tutorial in an animated demonstration of how a LEGO Education SPIKE Prime robot turns to the left and to the right. To download the program check out the courses in which the tutorial is used.
This video tutorial focuses on accomplishing M06 Raise the Mast and M07 Kraken’s Treasure of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless attachment connected to the bottom of the robot, featuring side guides with stoppers for precise mast lifting and a central rubberized section to catch the treasure chest.
The challenge in this run is to collect the treasure before raising the mast fully, as the mission model locks the chest if the mast is lifted too far too soon. The robot must push and lift with great precision, stopping at exactly the right point to avoid triggering the lock, then continue raising the mast to complete the mission. This sequence demonstrates careful mechanical design, accurate programming, and precise timing to accomplish two interconnected missions in one smooth run.
This video is about a lever that should be pushed and this lever is connected to an axle. This means the lever should rotate. It is a common mission on robotics competitions like FIRST LEGO League/World Robotics Olympiad. The inspiration for this mission is the FLL 2012 Senior Solutions Oven mission. The tutorial uses Luly, a small LEGO Education SPIKE Prime competition robot with 3D building instructions as a robot base.
In this video tutorial, the MiniBox box robot accomplishes M14 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime robot. In this run, the robot delivers the LEGO minifigures to their designated places.
In this lesson I would like to show you how to build a LEGO Mindstorms competition robot and tell you how we have designed the construction used in the videos so far. Surely it isn’t perfect, but it is a good start.
In this video tutorial, the MiniBox box robot accomplishes M08, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime box robot. In this run, the robot delivers the LEGO minifigure to its designated place and then pushes the M08 camera down the track to shoot the movie scene.
How do you lift heavy objects with an attachment? In this episode we show a simple, interesting, but yet not very popular way to lift something heavy with and LEGO Mindstorms EV3 robot and without gears and motors as attachment. As a specific example we are using the Strength Exercise mission from the FIRST LEGO League 2012 competition.
This is a 10 out of 10 tutorial in which the MiniBox accomplishes M14 and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime box robot. In this run, the robot should consistently and reliably deliver the LEGO minifigures to their designated places.
This tutorial demonstrates how a robot moves forward in a straight line with the use of the LEGO Education SPIKE Prime Motion sensor. While the robot is moving we push on the robot at the back, simulating that "something has happened" and the robot then again returns back to the moving straight. To download the program check out the courses in which the tutorial is used.