In this video tutorial, we use the motion sensor and demonstrate 10 out of 10 times how we can keep the robot moving in a straight line. The program is described in the previous tutorial in the lesson where we enter into the programming. Here we visualize how consistent and reliable the behavior of the robot is.
In this video tutorial, we demonstrate how to complete M12, M13, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge. We use the MiniBox, a robot built from LEGO Education SPIKE Prime.
To complete the missions, the robot rotates the chicken to trigger the M12 Virtual Reality Artist, pushes the M13 Craft Creator to release the creation, and collects the M15 LEGO minifigure. After completing all tasks, the robot detaches its attachment and leaves it on the field for a faster change at the base. Let's take a look!
This is a 10 out of 10 tutorial, in which the MiniBox robot accomplishes M01 3D Cinema of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge competition.
The MiniBox is a LEGO Education SPIKE Prime box robot and uses a detachable attachment to trigger the 2D cinema screen to become a 3D experience. Let's see how consistent and reliable the robot is - 10 out of 10 times!
In this video tutorial, the MiniBox robot accomplishes M01 3D Cinema of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The mission model is located close to the base, and the robot uses a detachable attachment to push and activate it.
The MiniBox is a LEGO Education SPIKE Prime box robot, designed to use detachable attachments, which helps make the runs faster. Let’s take a look!
In this video tutorial, the MiniBox box robot accomplishes M08, M14, and M15 of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition. The robot is a LEGO Education SPIKE Prime box robot. In this run, the robot delivers the LEGO minifigure to its designated place and then pushes the M08 camera down the track to shoot the movie scene.
This video tutorial focuses on accomplishing M01 Coral Nursery, M02 Shark, M03 Coral Reef, and M04 Scuba Diver of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a two-part pinless attachment designed to complete multiple missions in a single sequence. The small angled surface mounted under the robot flips the coral buds from M01 and pushes the shark from M02, while the front arm catches and delivers the Scuba Diver from the coral nursery to the coral reef support.
The back section of the attachment flips the coral reef from M03 using a friction-pin mechanism that stays straight during travel but drops the horizontal arm at the mission model to push the yellow plate and raise the coral reef. Extra axles on the front arm prevent the Scuba Diver from falling during delivery, ensuring reliable scoring. This coordinated multi-mission approach maximizes efficiency by combining pushing, collecting, and delivering into one smooth run.
This video tutorial demonstrates how the MiniBox accomplishes four missions - M06, M07, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge robotics competition.
It may seem challenging to achieve all of this in a single run, but with careful planning and solid programming, success is within reach! The robot is a LEGO Education SPIKE Prime box robot, equipped with rubber bands and various mechanisms. Since this is our final run, we can leave the robot on the mat, saving some time. Let's dive in!
This is a 10 out of 10 video tutorial that focuses on accomplishing M01 Coral Nursery, M02 Shark, M03 Coral Reef, and M04 Scuba Diver of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot).
The robot pushes the shark, flips the coral buds and coral reef, and collects and delivers the Scuba Diver with precision. This efficient multi-mission run is designed for speed and reliability, ensuring maximum points with minimal wasted movement. You can watch the full explaining tutorial here.
This video tutorial focuses on accomplishing M15 Research Vessel of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot (a LEGO Education SPIKE Prime robot). The run uses a pinless attachment designed to push the ship loaded with cargo to its destination. After the previous run, the hook part is removed and replaced with a locking component that holds the ship securely during transport.
The locking mechanism uses friction pins to keep the ship stable until it reaches its destination, where it can then be released smoothly. This approach ensures the cargo remains secure throughout the journey while allowing for safe delivery and quick unloading at the final position.
This video tutorial is a 10 out of 10, demonstrating how the MiniBox accomplishes four missions - M06, M07, M14, and M15 - of the FIRST LEGO League 2023-2024 MASTERPIECE Challenge.
Yes, the attachment is complex, and there are quite a few actions, but this LEGO Education SPIKE Prime box robot handles them brilliantly! Let's take a look!
This video tutorial focuses on accomplishing M15 Research Vessel of the FIRST LEGO League 2024-2025 SUBMERGED Challenge using the Nautiq box robot. In this series of test runs, the goal is to achieve 10 out of 10 successful deliveries, with the robot pushing the loaded ship to its destination, releasing it cleanly, and moving to the other launch area without a single failed attempt.
The run uses a pinless attachment with a locking mechanism and friction pins to secure the cargo during movement and allow smooth release upon arrival. The precise programming and stable design ensure consistent performance across the trials.